• 한국항행학회논문지
• /
• 제12권3호
• /
• pp.201-207
• /
• 2008

대용량 WDM 전송 시스템의 구현을 위해 중간에 광 위상 공액기 (optical phase conjugator)를 갖는 광섬유에서 축적된 분산량을 precompensation과 postcompensation으로 조절하는 분산 제어 (DM; dispersion management) 전송 링크의 설계 기준을 제시하였다. 본 논문에서 살펴본 DM 구조는 precompensation과 postcompensation가 이루어지는 위치에 따라 bi-end 형태와 concentration 형태의 두 가지이다. 전송 링크 설계 파라미터인 송신기부터 OPC까지의 구간과 OPC부터 수신기까지의 유효 잉여 분산 범위는 OPC에 대해서만 대칭되어 있으면 precompensation과 postcompensation을 수행하는 분산 보상 광섬유(DCF; dispersion compensating fiber)의 위치에 크게 의존하지 않는다는 것을 확인하였다.

• ETRI Journal
• /
• 제28권1호
• /
• pp.103-106
• /
• 2006

We have fabricated a planar lightwave circuit (PLC) hybrid-integrated optical sub-assembly of a triplexer using a thin film filter (TFF)-attached wavelength division multiplexer (WDM) and photodiode (PD) carriers. Two types of TFFs were attached to a diced side of a silica-terraced PLC platform, and the PD carriers with a $45^{\circ}$ mirror on which pin-PDs were bonded were assembled with the platform. A clear transmitter eye-pattern and minimum receiver sensitivity of -24.5 dBm were obtained under 1.25 Gb/s operation for digital applications, and a second-order inter-modulation distortion (IMD2) of -70 dBc was achieved for an analog receiver.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권3호
• /
• pp.1136-1151
• /
• 2018

This paper proposes a new hybrid scheme to decrease the high peak to average power ratio (PAPR) of optical orthogonal frequency division multiplexing (OFDM) signals in visible light communication (VLC) systems. The PAPR causes nonlinear signal distortions and high power requirements for the VLC transmitter (light emitting diode, LED). The proposed method is applicable for both direct current-biased optical OFDM (DCO-OFDM) and asymmetrically clipped optical OFDM (ACO-OFDM). In the proposed scheme, the PTS method is firstly modified to fit both optical OFDM approaches transmission and then combined with signal clipping method for further PAPR reduction and bit error rate (BER) improvement of the VLC system. The performance of hybrid scheme has been evaluated and compared with the original OFDM based VLC system, conventional PTS and clipping methods. The results show that the hybrid scheme outperforms other methods in terms of both the PAPR reduction and BER performance.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 추계학술대회
• /
• pp.964-966
• /
• 2015

분산 제어 (DM; dispersion management)와 광 위상 공액기 (OPC; optical phase conjugator)가 적용된 광전송 링크에서 송신단부터 OPC까지 중계 구간이 증가할수록 단일 모드 광섬유 (SMF; single mode fiber)의 길이와 중계 구간 당 잉여 분산 (RDPS; residual dispersion per span)은 감소하고, OPC부터 수신단까지는 중계 구간이 증가할수록 SMF 길이와 RDPS가 증가하는 분포에서 인접 중계 구간과의 SMF 길이와 RDPS 편차가 WDM 신호의 보상에 미치는 영향을 살펴보았다.

• Current Optics and Photonics
• /
• 제2권2호
• /
• pp.134-139
• /
• 2018

A novel approach for frequency-tripling vector signal generation via balanced detection without precoding and optical filter is proposed. The scheme is mainly utilizing an integrated dual-polarization quadrature phase shift keying (DPQPSK) modulator. In the DPQPSK modulator, one QPSK modulator is driven by an RF signal to generate high-order optical sidebands, while the other QPSK modulator is modulated by I/Q data streams to produce baseband vector signal as an optical carrier. After that, a frequency-tripling 16-quadrature-amplitude-modulation (16QAM) vector millimeter-wave (mm-wave) signal can be obtained by balanced detection. The proposed scheme can reduce the complexity of transmitter digital signal processing. The results show that, a 4 Gbaud baseband 16QAM vector signal can be generated at 30 GHz by frequency-tripling. After 10 km single-mode fiber (SMF) transmission, the constellation and eye diagrams of the generated vector signal perform well and a bit-error-rate (BER) below than 1e-3 can be achieved.

• Current Optics and Photonics
• /
• 제3권3호
• /
• pp.210-214
• /
• 2019

The allowable path-deviation time of aircraft in a free-space optical communication system has been estimated from various trajectories, using different values of aircraft speeds and turn rates. We assumed the existence of a link between the aircraft and a ground base station. First, the transmitter beam's divergence angle was calculated through two different approaches, one based on a simple optical-link equation, and the other based on an attenuation coefficient. From the calculations, the discrepancy between the two approaches was negligible when the link distance was approximately 110 km, and was under 5% when the link distance ranged from 80 to 140 km. Subsequently, the allowable path-deviation time of the aircraft within the tracking-error tolerance of the system was estimated, using different aircraft speeds, turn rates, and link distances. The results indicated that the allowable path-deviation time was primarily determined by the aircraft's speed and turn rate. For example, the allowable path-deviation time was estimated to be ~3.5 s for an aircraft speed of 166.68 km/h, a turn rate of $90^{\circ}/min$, and a link distance of 100 km. Furthermore, for a constant aircraft speed and turn rate, the path-deviation time was observed to be almost unchanged when the link distance ranged from 80 to 140 km.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.287-290
• /
• 1999

In the transmitter of optical fiber transmission systems, a time-division multiplexer combines several parallel data streams into a single data stream with a high bit rate. In this paper, we design a 2:1 (2-channels) time-division multiplexer using SiGe HBT with emitter size of 2$\times$8${\mu}{\textrm}{m}$$^2$. The operation speed is 10Gbps, the rise and fall times of 20-80% are 34ps and 35ps, respectively and the dissipation of power is 0.86W.

• 한국광학회지
• /
• 제34권4호
• /
• pp.151-156
• /
• 2023

파장당 200 Gb/s급 신호를 전송하는 고속 근거리 광통신 시스템을 비용 효율적으로 구축하기 위한 방안으로서 캐리어 억제 펄스 기반의 2채널 광학적 시분할 다중화 시스템을 제안한다. 캐리어 억제 펄스는 널 바이어스가 인가된 마하 젠더 변조기로 생성되며, 이는 시분할 다중화 신호를 색분산에 강인하게 만든다. 송신부에서는 캐리어 억제 펄스를 둘로 분기하고, 각각을 100 Gb/s의 4레벨 진폭 변조 신호로 변조한 후, 광학적 시분할 다중화를 통해 200 Gb/s의 신호를 생성한다. 다중화된 광 신호는 광섬유로 전송된 후, 반도체 광 증폭기로 증폭되며, 한 개의 광 검출기로 검출된다. 증폭기에 의해 발생한 잡음은 광학 필터로 제거된다. 시분할 다중화 과정에서 발생하는 누화는 다중 입력-다중 출력 이퀄라이저로 보상한다. 본 연구에서는 200 Gb/s의 고속 신호를 40 ps/nm의 색분산을 갖는 광섬유로 전송하여도 3.8×10^-3 이하의 비트 오율을 확보할 수 있음을 시뮬레이션으로 확인하였다.

• ETRI Journal
• /
• 제28권1호
• /
• pp.9-16
• /
• 2006

In this paper, we analyzed and measured the electrical crosstalk characteristics of a 1.25 Gbps triplexer module for Ethernet passive optical networks to realize fiber-tothe-home services. Electrical crosstalk characteristic of the 1.25 Gbps optical triplexer module on a resistive silicon substrate should be more serious than on a dielectric substrate. Consequently, using the finite element method, we analyze the electrical crosstalk phenomena and propose a silicon substrate structure with a dummy ground line that is the simplest low-crosstalk layout configuration in the 1.25 Gbps optical triplexer module. The triplexer module consists of a laser diode as a transmitter, a digital photodetector as a digital data receiver, and an analog photodetector as a cable television signal receiver. According to IEEE 802.3ah and ITU-T G.983.3, the digital receiver and analog receiver sensitivities have to meet -24 dBm at $BER=10^{-12}$ and -7.7 dBm at 44 dB SNR. The electrical crosstalk levels have to maintain less than -86 dB from DC to 3 GHz. From analysis and measurement results, the proposed silicon substrate structure that contains the dummy line with $100\;{\mu}m$ space from the signal lines and 4 mm separations among the devices satisfies the electrical crosstalk level compared to a simple structure. This proposed structure can be easily implemented with design convenience and greatly reduce the silicon substrate size by about 50 %.

• 한국통신학회논문지
• /
• 제12권6호
• /
• pp.612-620
• /
• 1987

기존 RF변조복조기의 한계를 극복하고, 고속 장거리 전송이 가능한 광변복조기를 설계 제작하였다. 인터페이스는 기존시스템과의 호환성을 위해 EIA RS-232C와 CCITT V.24를 채택하였고 디지털 코딩 방식으로는 Biphase코딩방식을 사용하였다. 또한 시스템의 자체 진단을 위한 Loopback Test기능을 부가하였다. 광 송수신기의 단파장대의 LD-APD를 사용하여 $10^-9$BER에서 -30dBm의 수신 감도를 갖도록 설계하였다. 구성된 시스템은 동기식의 경우 1200bps~57.6Kbps, 비동기식의 경우 DC~200Kbps 까지 임의의 속도로 데이타 전송이 가능하였다.