• Journal of the Optical Society of Korea
• /
• 제19권4호
• /
• pp.371-375
• /
• 2015

The impact of equivalent optical bandwidth on the performance of a system using a reflective electroabsorption modulator (R-EAM) based optical source has been experimentally evaluated with signals operating at 2.5 Gb/s and beyond. The equivalent optical bandwidth of our source with a broadband seed light was simply adjusted by using a bandwidth tunable optical filter. From the measurements, we have estimated the required equivalent optical bandwidth of our source for an error-free transmission (@ bit-error-rate of $10^{-12}$) and a forward error correction (FEC) threshold of $2{\times}10^{-4}$.

• 한국광학회지
• /
• 제4권1호
• /
• pp.9-14
• /
• 1993

Amplitude filter와 phase filter가 결합된 CFAP(Combined Filter of Amplitude and Phase)의 결상 특성을 조사하기 위해 Bessel beam을 도입하였다. 이 논문에서는 무수차계와 수차를 포함하는 광학계에 대한 PSF와 encircled energy(E), transmission ratio(TR), gain(G)을 Bessel beam의 node수에 따라 계산하였다. 이 결과 Bessel beam은 amplitude filter와 다른 PSF 특성을 보였으며, 또한 구면수차가 포함된 경우 compensating effect가 크게 나타났다. 특히 Bessel beam의 central spot의 size가 Airy disk 반경보다 적게 나타나므로, 고집적 반도체 소자 제작에 이용가능하리라 생각된다.

• 한국광학회지
• /
• 제8권1호
• /
• pp.63-67
• /
• 1997

분산천이 광섬유를 이용하는 등간격 다채널 광전송 시스템에서 광섬유의 4광파혼합이 전송품질에 미치는 영향에 대하여 실험적으로 고찰하였다. 4광파혼합의 효율을 최소화하기 위해 편광조절기를 사용하여 인접한 채널 간의 편광상태가 서로 직교하도록 하였다. 이 경우 채널들의 편광이 일정하게 정렬된 경우와 비교하여 전송시 전력 페널티가 1.5dB 감소되었다.

• 전기학회논문지
• /
• 제63권9호
• /
• pp.1180-1185
• /
• 2014

This paper describes the effects on SUS tube of power optical fiber composite cable on underground transmission lines. The effects on grounding, air gap between SUS tube and metal sheath, contact resistance between outer semi-conducting layer and metal sheath and grounding of SUS tube application or not are variously analysed using EMTP in normal operating condition as well as single line to ground fault. From these results, in this paper, the scheme for protecting the electrically abnormal phenomena will be established on power-optical fiber composite cable of underground transmission lines. This paper can contribute to specification of grounding reference of SUS tube of optical fiber composite power cable system.

• 전자공학회논문지A
• /
• 제33A권7호
• /
• pp.1-14
• /
• 1996

Effects of the external optical feedback on the optical transmission characteristics were evaluated for 3 kinds of commercialized DFB-LD modules for 2.5Gbps optical communication systems. As a result, intensity noise induced by external optical feedback via generating the external cavity modes deteriorated the transmission performances of sthe DFB-LD modules as much as 1.5dB, 1.2dB, and 1.0dB for the maximum feedback ratio of -8.8dB which corresponds to the worst reflection along the fiber transmission line. Additional penalty of 0.5dB was occurrred when state of polarization of feedback light was adjusted. From the experiments evaluating the isolation ratio of the single polarization optical isolator, decrease of the polarization dependent isolation ratio as much as 10dB from that of specification and the effective isolation ratio as much as 20dB from that of specification was mjor cause of high sensitivity of DFB-LD modules to external feedback. It was suggested that polarization independent optical isolator or single polarization optical isolator with isolation ratio specification of more than 40dB is required for 2.5Gbps DFB-LD modules with complete suppression of external feedback effects.

• 한국항행학회논문지
• /
• 제17권4호
• /
• pp.413-420
• /
• 2013

분산 제어 (DM; dispersion management)와 광 위상 공액 (optical phase conjugation)이 적용된 파장 다중 (WDM; wavelength division multiplexing) 시스템의 유연한 구성을 위하여 중계 구간 당 잉여 분산 (RDPS; residual dispersion per span)이 랜덤하게 분포하는 전송 링크에서 전체 전송 거리에 따른 설계 기준을 도출하였다. 설계기준 분석에 사용된 DM 파라미터는 유효 전체 잉여 분산 (NRD; net residual dispersion)과 유효 입사 전력이다. 단일 모드 광섬유 (SMF; single mode fiber) 기준 전체 전송 거리가 1,000 km 이하인 링크에 랜덤 분포의 RDPS가 적용되는 경우 일정 분포에 비해 시스템 성능이 크게 차이나지 않아 유연한 네트워크 구성이 가능하고, 넓은 범위에 걸쳐 있는 WDM 채널에 대해 하나의 값이 아닌 폭넓은 NRD를 링크에 적용할 수 있다는 것을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 D
• /
• pp.1901-1902
• /
• 2006

In recent years, it has been a worldwide trend that many power utilities gave their attention to develop and operate their power plants, substation and distribution systems. Following this trend, KEPCO(Korea Electric Power Corporation) has developed many electric automation systems with various communication networks. It has been natural that the automation systems are just focused on to remote devices when they come to be designed. But, we have to shift the focus to the automation system itself. We have developed the Multi-service Optical Transmission System (M-OTS) for electrical power systems. It can be adopt to not only distribution power field but also the transmission power field. The result strongly shows that the system is potentially beneficial in reliability, speed, and expandability. This paper presents some of initial design efforts and results toward a KEPCO's communication system in distribution areas.

• ETRI Journal
• /
• 제34권1호
• /
• pp.122-125
• /
• 2012

A video signal through a high-density optical link has been demonstrated to show the reliability of optical link for high-data-rate transmission. To reduce optical point-to-point links, an electrical link has been utilized for control and clock signaling. The latency and flicker with background noise occurred during the transferring of data across the optical link due to electrical-to-optical with optical-to-electrical conversions. The proposed synchronization technology combined with a flicker and denoising algorithm has given good results and can be applied in high-definition serial data interface (HD-SDI), ultra-HD-SDI, and HD multimedia interface transmission system applications.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2004년도 제15회 정기총회 및 동계학술발표회
• /
• pp.272-273
• /
• 2004

Optical connector is prone to take environment attack since it is exposed to various environmental conditions. As the data bit rate is increased in the modern optical communication system. the stability of optical connector becomes more important issue in complex network comprising of many connection by connectors. In this research, to estimate the influence of defects of connector, especially surface scratches, on the transmission, surface scratches were intentionally introduced on the cross sectional surface of optical connector and the insertion loss, return loss. and BER were measured as functions of geometry and density of scratches, Environmental conditioning was also performed onto these connectors and the variations of basic optical characteristics mentioned above were measured. Based on this measurement the lifetime of connectors was estimated by statistical prediction method.

• 한국전자파학회논문지
• /
• 제14권11호
• /
• pp.1113-1120
• /
• 2003

향후 CDMA(Code Division Multiple Access) 디지털 셀룰러 이동통신망에서는 안테나와 RF(Radio Frequency) 송ㆍ수신기만을 갖춘 다수의 소형 기지국들을 광섬유를 이용하여 중앙국으로 연결시키는 SCM(Subcarrier Multiplexing) 광링크 시스템의 수요가 많이 예상된다. 본 논문에서는 CDMA RF 신호전송을 위한 SCM 광링크 시스템의 성능분석을 위하여 Mach-Zehnder변조기(MZM)의 전달함수를 입력신호가 3제곱이 되어 출력되는 비선형으로 모델링 하였다. 그리고 페이딩 채널 영향으로 다중경로 신호성분을 가지고 소형 기지국에 수신되는 여러 다중 가입자 CDMA 신호들이 MZM을 통과한 후 복조되는 과정에서 생기는 다중접속 간섭신호를 유도하여 성능분석을 하고 레이크 수신기를 이용하여 성능개선을 하였다.