• Journal of Information Processing Systems
• /
• v.9 no.2
• /
• pp.301-314
• /
• 2013

In a parallel processing system, Multi-stage Interconnection Networks (MINs) play a vital role in making the network reliable and cost effective. The MIN is an important piece of architecture for a multiprocessor system, and it has a good impact in the field of communication. Optical Multi-stage Interconnection Networks (OMINs) are the advanced version of MINs. The main problem with OMINs is crosstalk. This paper, presents the (1) Destination Based Modified Omega Network (DBMON) and the (2) Destination Based Scheduling Algorithm (DBSA). DBSA does the scheduling for a source and their corresponding destination address for messages transmission and these scheduled addresses are passed through DBMON. Furthermore, the performance of DBMON is compared with the Crosstalk-Free Modified Omega Network (CFMON). CFMON also minimizes the crosstalk in a minimum number of passes. Results show that DBMON is better than CFMON in terms of the average number of passes and execution time. DBSA can transmit all the messages in only two passes from any source to any destination, through DBMON and without crosstalk. This network is the modified form of the original omega network. Crosstalk minimization is the main objective of the proposed algorithm and proposed network.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2007.04a
• /
• pp.465-468
• /
• 2007

This paper addresses the scheme for transmitting Data and TDM signals based on E-PON. E-PON technology, that combines low-cost Ethernet technology and optical fiber infra-structure, has been appeared as a solution of next generation access network. The transmission speed of E-PON is 1Gbps and symmetric in both direction, such as downstream and upstream. Therefore, it is possible to save the cost through sample network architecture, efficient operation, and low maintenance cost of optical IP Ethernet network. By adding TBMoIP(Time Division Multiplexing over Internet Protocol) module to this E-PON system, and implementing QoS(Quality of Service) control function, this system can provide data and TDM service efficiently.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.10
• /
• pp.522-531
• /
• 2001

A large dispersion value in optical fiber cable should be maintained to suppress the nonlinear effect induced distortion for the narrow channel spaced DWDM system while small value of dispersion is needed for high bit rate transmission. To meet these two requirement simultaneously, dispersion distribution control method during the cabling process was exploited. And dispersion distribution cable was fabricated by the way of designing alternation sections in single cable piece with standard single mode fiber(SSMF) and newly developed negative dispersion fiber(NDF). It is shown that the discretely dispersion varying cable along the axis keep the same average dispersion value of an entire cable length as that of nonzero dispersion shifted fiber(NZDSF) with 3.6 ps/km/nm while the local dispersion is around 17 ps/km/nm of absolute value. Moreover, the developed cable had good optical and mechanical properties and the feasibility of this cable for practical use was confirmed.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.4
• /
• pp.1392-1403
• /
• 2015

The rapid development of both communication traffic and increasing optical network sizes has increased energy consumption. Traditional algorithms and strategies don't apply to controlling the expanded network. Immunization algorithms originated from the complex system theory are feasible for large-scale systems based on a scale-free network model. This paper proposes the immunization strategy for complex systems which includes random and targeted immunizations to solve energy consumption issues and uses traffic to judge the energy savings from the node immunization. The simulation results verify the effectiveness of the proposed strategy. Furthermore, this paper provides a possibility for saving energy with optical transmission networks.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.2
• /
• pp.371-380
• /
• 1997

A lot of efforts have been made to develop low-cost and reliable broadband optical subscriber loop systems. Here we propose a new loop system with shared ligh sources and remote modulation method. This system uses an external modulation method for both directions and all the light sources are maintained inside a central office. Moreover, the ligh source is not dedicated to each subsriber link but shared among many subscriber links. We expermentally demonstrated that one shared light source could accommodate about 2, 000 deownstream links(2.5 Gb/s per link), 500 upstream links(155 Mb/s per link).

• Korean Journal of Optics and Photonics
• /
• v.12 no.1
• /
• pp.32-39
• /
• 2001

We analyze the effectiveness of the PMD compensation as a function of the link PDL, to acquire the guidelines for the successful deployment of PMDC. Result shows that the amount of BER improvement from the PMDC is decreased as the link PDL increases. Because PDL elements in the transmission system make well-defined two PSPs under the absence of PDL not orthogonal anymore, and proper definition of fast and slow polarization harder. Accordingly, consideration of PDL's potential effects must be needed for design of polarization mode dispersion compensation.sation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.4
• /
• pp.534-543
• /
• 2000

In this paper, when the current optical communication system is used for the DWDM. The FBG filter for the DWDN is able to reduce the interferences between the adjacent channels. In this paper, therefore, we find the relection spectrums for the three types of induced index changes, that is, uniform, Gaussian apodized, and raised-cosine apodized. From the obtained result in this paper, we can see that uniform FBG does not fit, and that the smaller the maximum induced index change $\sigma$ is and the larger the value of parameter C in the raised-cosine apodized FBG and G in the Gaussian apodized FBG are the fitter they are on the narrow filter for DWDM.

• Archives of design research
• /
• v.12 no.4
• /
• pp.61-68
• /
• 1999

Most of the time, developers spend their energy to analyze the main function of the system or make source codes. As a result, they can not consider user interface on their own system and this is true in most programmer's world. But we want to consider the design concept in developing mechanism. In this case we have to upgrade the legacy system which maintaining the transmission system using the copper cables, and add the transmission system using the optical fiber cables. Therefore we design the user interface make easy for end users who are using the maintaining system on copper cables not to confuse the new system which include optical fibers. Especially, we are consider the developing model of design policy and real user to make easy to use new system. In this paper we will describe the instance to adapt the design concept on Broadband Access Network Operation Support System.

• Journal of the Korean Society of Safety
• /
• v.28 no.4
• /
• pp.1-7
• /
• 2013

Train accidents can be directly connected to fatal accidents-collision, derailment, Fire, railway crossing accidents-resulting in tremendous human casualties. First of all, the railway derailment is not only related to most of railway accidents but also it can lead to much more catastrophic accompanying train overtured than other factors. Therefore, it is most important factor to ensure railway safety. some foreign countries have applied to the detector machines(e.g., ultrasonic detector car, sleep mode, current detector, optical sensing, optical fiber). Since it was developed in order to prevent train from being derailed. In korea, the existing track method has been used to monitor rail condition using track circuit. However, we found out it impossible for Communication Based Train Control system(CBTC), recent technology to detect rail condition using balise(data transmission devices) without no track circuit. For this reason, it is needed instantly to develop real-time monitoring system used to detect broken rails. Firstly, this paper presents domestic and international statues analysis of rail breaks technology. Secondly, the composition and the characteristics of the real-time monitoring system. Finally, the evidence that this system could assumed the location and type of broken rails was proved by the experiment of prototype and operation line tests. We concluded that this system can detect rail break section in which error span exist within${\pm}1m$.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.7
• /
• pp.923-928
• /
• 2014

Communication underwater is severely limited when compared to communications in air because water is essentially opaque to electromagnetic radiation except in visible range. Acoustic systems are capable of long range communication, but offer limited data rates and significant latency due to the speed of sound in water. On the other hand, optical wireless communication has been proposed as one of the best alternatives to meet the requirements of the underwater observation and subsea monitoring systems. It will help In this study, we are developing an underwater optical communication system that integrates with a depot ship floating on the water. An interface between LED lighting communication system and Bluetooth module is presented to support the underwater-to-air communications. Error free image and text transmission at 3 m of water were achieved at bit rates of 230.4 kbps. This development effort will enhance infrastructure to efficiently interconnect between underwater wireless systems and command ship networks for underwater monitoring.