• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.334-335
• /
• 2003

현재 기지국과 중계기 사이의 광선로에 사용되고 있는 1310 nm와 1550 nm 파장이외에 OADM (optical add-drop multiplexer)을 사용하여 새로운 2개 파장을 광선로에 추가로 연결함으로써 광선로 임차사용의 효율을 증대시키는 4파장 광중계기의 구현시 drop신호는 삽입손실 ­3 dB 이하의 저손실특성이 요구되며 isolation 신호는 통상 ­40 dB 이상의 고품질이 요구된다. 그러나 이와같은 성능의 광모듈을 실제로 구현하기 어렵다. 따라서 많은 광결합 부품의 조합을 통해서도 drop또는 isolation 특성은 4파장 광중계기를 실용화하기 어려울 만큼 저하된다. (중략)

• Electronics and Telecommunications Trends
• /
• v.37 no.3
• /
• pp.23-32
• /
• 2022

This paper provides an overview of optical transport technology for 5G mobile fronthaul. The configuration of fronthaul network is classified with dedicated fiber, passive WDM(Wavelength Division Multiplexing), active WDM, and semi-active WDM, which has its own advantages and drawbacks. Various WDM technology is applied for fronthaul transport, depending on the wavelength bands, required number of wavelength channels, configuration of fronthaul network, etc. In order to meet the increasing transport capacity, a 50/100 Gbps optical transceiver will be used in place of the present 10/25 Gbps technology. Trends will be continued to enhance the flexibility and reliability of the fronthaul optical network supporting highly advanced 5G mobile services.

• Korean Journal of Optics and Photonics
• /
• v.10 no.1
• /
• pp.64-67
• /
• 1999

We have been implemented 10 Gb/s-320 km of dispersion-shifted fiber (DSF) transmission. The optical link consists of a 10 Gb/s optical transceiver, an optical booster amplifier, 3 sets of optical in-line amplifiers, an optical preamplifier and transmission fibers. Firstly, we investigated the Q-factor characteristics in terms of optical signal to noise ratio (OSNR) of 320 km of DSF, measured receiver sensitivity is -27 dBm and power penalty is 2 dB, respectively. We concluded that optical SNR degradation and path penalty gives rise to 1 dB penalty, respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.7
• /
• pp.1354-1358
• /
• 2007

Nowaday, the wideband multimedia service, high speed and great capacity internet service etc. are increasing, so the network construction with the base of optical subscriber network is necessary. As efficient and economic optical subscriber networks are developed, so efficient network construction is possible. The most technology of them is WDM(Wavelength Division Multiplexing)-PON technology of ONU(Optical Network Unit) jointing method using PON(Passive Optical Network). In this paper, we have studied on a method for automatic optimization of data modulation current as optical power when the data is transmitted.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.2
• /
• pp.1-8
• /
• 2004

This paper describes the design of monolithic optical transceiver circuitry being used as a part of the fiber optic modules. It has been designed in 0.6 ${\mu}{\textrm}{m}$ 2-poly 3 metal silicon CMOS analog technology and operates at 155.52 Mbps(STM-1) data rates. It drives laser diode to transmit intensity modulated optical signal according to 155.52 Mbps electrical data from system. Also, it receives 155.52 Mbps optical data that transmitted from other systems and converts it to electrical data using photo diode and amplifier. To avoid noise and interference between transmitter and receiver on one chip, layout techniques such as special placement, power supply separation, guard ring, and protection wall were used in the design. The die area is 4 ${\times}$ 4 $\textrm{mm}^2$ and the estimated power dissipation is less than 900 ㎽ with a single 5 V supply.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.9
• /
• pp.11-17
• /
• 2004

This paper describes the implementation of monolithic optical transceiver circuitry being used as a part of the fiber optic modules. It has been fabricated in 0.6 ${\mu}{\textrm}{m}$ 2-poly 3-metal silicon CMOS analog technology and operates at 155.52 Mbps(STM-1) data rates. It drives laser diode to transmit intensity modulated optical signal according to 155.52 Mbps electrical data from system. Also, it receives 155.52 Mbps optical data that transmitted from other systems and converts it to electrical data using photo diode and amplifier. To avoid noise and interference between transmitter and receiver on one chip, layout techniques such as special placement, power supply separation, guard ring, and protection wall were used in the design. The die area is 4 ${\times}$ 4 $\textrm{mm}^2$, and it has 32.3 ps rms and 335.9 ps peak to peak jitter on loopback testing. the measured power dissipation of whole chip is 1.15 W(230 mW) with a single 5 V supply.

• ETRI Journal
• /
• v.35 no.1
• /
• pp.1-6
• /
• 2013

In this paper, we present an implemented serial 40-Gb/s receiver optical subassembly (ROSA) module by employing a proposed TO-CAN package and flexible printed circuit board (FPCB). The TO-CAN package employs an L-shaped metal support to provide a straight line signal path between the TO-CAN package and the FPCB. In addition, the FPCB incorporates a signal line with an open stub to alleviate signal distortion owing to an impedance mismatch generated from the soldering pad attached to the main circuit board. The receiver sensitivity of the ROSA module measures below -9 dBm for 40 Gb/s at an extinction ratio of 7 dB and a bit error rate of $10^{-12}$.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.685-689
• /
• 2003

오늘날 급격히 증가되고 있는 광 대역 멀티미디어 서비스, 초고속 대용량 인터넷 서비스 등을 가입자에게 제공하기 위해서는 광 가입자망 기반의 네트워크 구성이 필수적이다. 최근 효율적이고 경제적인 광 가입자망 구축을 위한 기술들이 빠르게 개발됨에 따라 효율적인 네트워크 구성이 가능하게 되었다. 이중 대표적인 기술로 PON(Passive Optical Network)을 이용하여 ONN(Optical Network Unit)를 공유하는 방식의 WDM(Wavelength Division Multiplexing)-PON 기술이 있으며, 이를 이용한 FTTH(Fiber to The Home)시스템에 대한 개발이 활발히 이루어지고 있다. 본 논문에서는 100BASE-TX 및 1000BASE-T Ethernet 신호를 입력받아 파장별 DFB-LD에 직전 변조하는 방식을 사용하여 WDM-PON 시스템에 적용할 수 있는 광 송수신기를 설계하고 이를 구현하였다.

• The Magazine of the IEIE
• /
• v.30 no.3
• /
• pp.295-295
• /
• 2003

The advantages of using analogue optical networks for delivering radio signals from a central location to many remote antenna sites have been recognized. In a telecommnications context, radio signals may be for fixed radio access, cordless or mobile networks, but the same principles apply. By making use of the high bandwidth, low loss characteristics of optical fiber, all high frequency and signal processing functions can be performed centrally and signals can then be transported over the optical network directly at the carrier frequency. The remote sites then become very simple, requiring only optoelectronic conversion, filtering and linear amplification. This shifting of the complex functionality away from the remote site allow cheap, reliable, small and light-weight radio access points with low power consumption to be deployed. In this paper, we show that an electroabsorption modulation(EAM) may be used as a single component in such a radio access point, as a passive transceiver for small-sized cell(picocells).

• The Magazine of the IEIE
• /
• v.30 no.3
• /
• pp.81-85
• /
• 2003

The advantages of using analogue optical networks for delivering radio signals from a central location to many remote antenna sites have been recognized. In a telecommnications context, radio signals may be for fixed radio access, cordless or mobile networks, but the same principles apply. By making use of the high bandwidth, low loss characteristics of optical fiber, all high frequency and signal processing functions can be performed centrally and signals can then be transported over the optical network directly at the carrier frequency. The remote sites then become very simple, requiring only optoelectronic conversion, filtering and linear amplification. This shifting of the complex functionality away from the remote site allow cheap, reliable, small and light-weight radio access points with low power consumption to be deployed. In this paper, we show that an electroabsorption modulation(EAM) may be used as a single component in such a radio access point, as a passive transceiver for small-sized cell(picocells).