• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.3
• /
• pp.366-372
• /
• 2006

This study is to investigate the physicochemical properties of differently pretreated chestnut starches during starch isolation and to examine their gelatinization properties by both heat and alkali treatments. One kind is starch A made by alkali method from peeled chestnut. The other is starch B made from chestnut with the outer layer. The results are as follows. Starch A has higher water binding capacity of 86.9% than starch B with 80.66%. Swelling powers of both starch A and B increased rapidly from $60^{\circ}C\;to\;80^{\circ}C$ in both, and since then it has changed a bit. Both began to show their solubility at $60^{\circ}C$ and increased continuously as the temperature went up. Starch A has higher swelling power and solubility than starch B. In iodine reaction, starch A has higher ${\lambda}max$ and absorbance at ${\lambda}max$ than starch B. X-ray diffraction patterns showed that starch A is type $C_b$ and that starch B is type B. Starch B has higher relative crystallinity of 37.0% than starch A with 36.2%. The results by differential scanning calorimetry revealed that starch A gelatinized from $66.95^{\circ}C$ to $77.5^{\circ}C$ and its enthalpy is 2.04 cal/g. And starch B gelatinized from $67.09^{\circ}C\;to\;77.5^{\circ}C$, and its enthalpy is 2.29 cal/g. Amylograms of chestnut starch at 6.5% concentration indicated that starch B needs higher onset temperature when beginning to gelatinize than starch A does. But starch A shows much higher peak viscosity, breakdown and setback than starch B does. Starch A shows higher viscosity, gel volume, and optical transmittance in gelatinization properties by alkali than starch B does.

• Journal of the Korean Vacuum Society
• /
• v.21 no.6
• /
• pp.333-341
• /
• 2012

Indium Tin Oxide (ITO) thin films were prepared by RF magnetron sputtering with different flow rates of $O_2$ gas from 0 to 12 sccm. Electrical and optical properties of these films were characterized and analyzed. ITO deposited on soda lime glass and RF power was 2 kW, frequency was 13.56 MHz, and working pressure was $1.0{\times}10^{-3}$ Torr, Ar gas was fixed at 1,000 sccm. The transmittance was measured at 300~1,100 nm ranges by using Photovoltaic analysis system. Electrical properties were measured by Hall measurement system. ITO thin films surface were measured by Scanning electron microscope. Atomic force microscope surface roughness scan for ITO thin films. ITO thin films secondary electron emission coefficient(${\gamma}$) was measured by ${\gamma}$-Focused ion beam. The resistivity is about $2.4{\times}10^{-4}{\Omega}{\cdot}cm$ and the weighted average transmittance is about 84.93% at 3 sccm oxygen flow rate. Also, we investigated Work-function of ITO thin films by using Auger neutralization mechanism according to secondary electron emission coefficient(${\gamma}$) values. We confirmed secondary electron emission peak at 3 sccm oxygen flow rate.

• Korean Journal of Food Science and Technology
• /
• v.23 no.5
• /
• pp.554-560
• /
• 1991

The physicochemical properties of Korean yam starches (D. aimadoimo, D. batatas and D. japonica) were investigated. The mean granular size of starches were 23.5 μm for D. aimadoimo, 23.9 μm for D. batatas and 18.2 μm for D. japonica. Amylose content, blue value and water binding capacity was $29{\sim}33%,\;0.42{\sim}0.51%\;and\;109.9{\sim}118.3%$, respectively. The optical transmittance of 0.3% (dry basis) yam starch suspensions were increased at $70{\sim}75^{\circ}C$ and D. japonica showed typical two-step transmittance curve. The swelling power and solubility patterns increased over $60^{\circ}C$, and D. aimadoimo was the highest values. Amylogram patterns of 5% (dry basis) yam starch suspensions, determined by Brabender amylograph, were similar to that of yam flours and the viscosity of D. aimadoimo had 630 BU, which was about 5 times higher than 130 BU for D. batatas and D. japonica. Observation under scanning electron microscope lefted marks of resistance to glucoamylase because these surfaces were similar to the natural granules. In rates of solubiliazation by dimethyl sulfoxide, D. aimadoimo showed the highest value. (3-Amylolysis limits of yam starches and their amylose were $71.8%{\sim}75.5%\;and\;90.2{\sim}92.1%$, respectively. Gel filtration patterns of debranched amylopectin by pullulanase were divided into 3 peaks. The weight ratios of peak III to peak II in yam starches were $2.15%{\sim}2.42%$.

• Anatomy & Biological Anthropology
• /
• v.31 no.4
• /
• pp.133-142
• /
• 2018

3D histology is a imaging system for the 3D structural information of cells or tissues. The synchrotron radiation propagation phase contrast micro-CT has been used in 3D imaging methods. However, the simple phase contrast micro-CT did not give sufficient micro-structural information when the specimen contains soft elements, as is the case with many biomedical tissue samples. The purpose of this study is to develop a new technique to enhance the phase contrast effect for soft tissue imaging. Experiments were performed at the imaging beam lines of Pohang Accelerator Laboratory (PAL). The biomedical tissue samples under frozen state was mounted on a computer-controlled precision stage and rotated in $0.18^{\circ}$ increments through $180^{\circ}$. An X-ray shadow of a specimen was converted into a visual image on the surface of a CdWO4 scintillator that was magnified using a microscopic objective lens(X5 or X20) before being captured with a digital CCD camera. 3-dimensional volume images of the specimen were obtained by applying a filtered back-projection algorithm to the projection images using a software package OCTOPUS. Surface reconstruction and volume segmentation and rendering were performed were performed using Amira software. In this study, We found that synchrotron phase contrast imaging of frozen tissue samples has higher contrast power for soft tissue than that of non-frozen samples. In conclusion, synchrotron radiation propagation phase contrast cryo-microCT imaging offers a promising tool for non-destructive high resolution 3D histology.

• Journal of Bio-Environment Control
• /
• v.31 no.4
• /
• pp.416-422
• /
• 2022

This study was conducted to investigate the effect of each light intensity and photoperiod combination on the growth and glucosinolates (GSLs) content of three species of Brassicaceae plants under the same daily light integral (DLI) conditions. Seeds of leaf mustard (Brassica juncea (L.) Czern.), red mustard(Brassica juncea L.) and kale (Brassica oleracea L. var. acephala (DC.) Alef.) were sown in a rockwool cubes and grown for three weeks. DLI was set to 10 mol·m^-2·d^-1 and treated with 10h-280, 14h-200, 18h-155, 22h-127 µmol·m^-2·s^-1 for three weeks. As a result at 14h-200 µmol·m^-2·s^-1 treatment, shoot fresh/dry weight, the number of leaves, and leaf area were increased in leaf mustard and kale but there was no significant difference in other treatments. In the total GSLs content, the treatment of 14h-200 µmol·m^-2·s^-1 increased significantly 139.95, 135.87, 154.03% compared to 10h-280, 18h-155, 22h-127 µmol·m^-2·s^-1 treatment in red mustard, and 14h-200 µmol·m^-2·s^-1 treatment increased significantly 132.96, 132.96, 134.03% compared to other treatments in kale. In red mustard, the treatment of 18h-155 µmol·m^-2·s^-1 showed an increase in shoot fresh/dry weight and the total GSLs contents than other photoperiods and 14h-200 µmol·m^-2·s^-1 treatment, the number of leaves significantly 15.62, 12.12, and 32.14% higher than other photoperiods. Since the DLI response is different depending on species even for similar Brassicaceae crops, it is necessary to get more detailed results by conducting optical light quality studies and deriving optimal DLI conditions to achieve minimum power consumption and maximum efficiency.