• Journal of the Optical Society of Korea
• /
• v.14 no.3
• /
• pp.266-276
• /
• 2010

In the present study, an optical system is proposed for maskless lithography using a digital micromirror device (DMD). The system consists of an illumination optical system, a DMD, and a projection lens system. The illumination optical system, developed for 95% uniformity, is composed of fly's eye lens plates, a 405 nm narrow band pass filter (NBPF), condensing lenses, a field lens and a 250W halogen lamp. The projection lens system, composed of 8 optical elements, is developed for 4 ${\mu}m$ resolution. The proposed system plays a role of an optical engine for PCB and/or FPD maskless lithography. Furthermore, many problems arising from the presence of masks in a conventional lithography system, such as expense and time in fabricating the masks, contamination by masks, disposal of masks, and the alignment of masks, may be solved by the proposed system. The proposed system is verified by lithography experiments which produce a line pattern with the resolution of 4 ${\mu}m$ line width.

• Proceedings of the Optical Society of Korea Conference
• /
• 1991.07a
• /
• pp.109-114
• /
• 1991

좋은(sub=micron) 분해능을 갖는 Photoresist film의 방법에 의한 Micro-Lithography의 발달은 반도체, Electro-Optic 등의 첨단산업에 큰 기여를 하였다. 본 내용은 이러한 PR을 이용한 Lithography System의 광학적인 원리에 대해 소개하고자 한다.

• Proceedings of the Optical Society of Korea Conference
• /
• 1990.02a
• /
• pp.222-226
• /
• 1990

This paper represents the construction of laser beam writing system, laser lithography, using new method that guarantees convenience and accuracy in laser focusing. The X, Y translation stage using DC motors was controlled by the computer. Minimum line width of 1.6${\mu}{\textrm}{m}$ was obtained by the laser lithography system.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.1
• /
• pp.6-11
• /
• 2001

We studied the feasibility of optical lithography for the critical layers of 0.12${\mu}{\textrm}{m}$ DRAM assuming ArF excimer laser as a light source. To enhance the fidelity of aerial image and process margin, Phase shift mask (PSM) patterns as well as binary mask patterns are corrected with in-house developed Optical Proximity Correction (OPC) software. As the result, w found that the aerial image of critical layers of DRAM cell with 0.12${\mu}{\textrm}{m}$ design rule could not be reproduced with binary masks. But if we use PSM or optical proximity corrected PSM, the fidelity of aerial image ,resolution and process margin are so much enhanced that they could be processed with optical lithography.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.269-274
• /
• 1999

As the semiconductor industry enters the next century, we are facing to the technological changes and challenges. Optical lithography has driven by the miniaturisation of semiconductor devices and has been accompanied by an increase in wafer productivity and performance through the reduction of the IC image geometries. In the last decade, DRAM(Dynamic Random Access Memories) have been quadrupoling in level of integration every two years. Korean chip makers have been produced the memory devices, mainly DRAM, which are the driving force of IC＇s(Integrated Circuits) development and are the technology indicator for advanced manufacturing. Therefore, Korean chip makers have an important position to predict and lead the patterning technology. In this paper, we will be discussed the limitations of the optical lithography, such as KrF and ArF. And, post optical lithography technology, such as E-beam lithography, EUV and E-beam Projection Lithography shall be introduced.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.06a
• /
• pp.357-358
• /
• 2009

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.6
• /
• pp.7-13
• /
• 2009

• Journal of the Optical Society of Korea
• /
• v.16 no.2
• /
• pp.127-132
• /
• 2012

This study discusses photoresist forming using a composite grayscale to fabricate a Fresnel lens. Grayscale lithography is a common production method used to facilitate the forming of lenses with different curvatures and depths. However, this approach is time consuming and expensive. This study proposes a method for overcoming these obstacles by integrating a digital micromirror device and microscope to supplant the traditional physical grayscale mask. This approach provides a simple and practical maskless optical lithography system. According to the results, the two adjacent grayscales displayed substantial differences between the high grayscale and influence the low grayscale that ultimately affected photoresist formation. Furthermore, we show that change of up to 150% in the slope can be achieved by changing the grayscale gradient in the central zone and the ring profile. The results of the optical experiment show a focus change with different gray gradients.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.123-126
• /
• 2004

We have demonstrated the fabrication of patterned 3D photonic crystals by holographic lithography in conjunction with soft lithography. Holographic lithography created 3D ordered macroporous structures and soft lithography made tailored defects. Because the hard baked photoresist pattern possessed high resistance against the uncured photoresist solution and the refractive index did not change appreciably by hard baking, a crosslinked photoresist was used as a relief pattern for the holographic fabrication of patterned 3D photonic crystals. More complicated defect geometries might be easily obtained with more complicated patterns on PDMS stamps. Moreover, the present results might be used as templates for 3D PCs of highindex defects that can be exploited as optical waveguides and optical circuits.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.11
• /
• pp.901-907
• /
• 2000

As the minimum feature size for making ULSI approaches the wavelength of light source in optical lithography, the aerial image is so hardly distorted because of the optical proximity effect that the accurate mask image reconstruction on wafer surface is almost impossible. We applied the Optical Proximity Correction(OPC) on isolated patterns assuming Attenuated Phase Shift Mask(APSM) as well as binary mask, to correct the widening of isolated patterns. In this study, we found that applying OPC to APSM shows much better improvement not only in enhancing the resolution and fidelity of t도 images but also in enhancing the process margin than applying OPC to the binary mask. Also, we propose the OPC method of APSM for isolated patterns, the size of which is less than the wavelength of the ArF excimer laser. Finally, we predicted the resolution limit of optical lithography through the aerial image simulation.