• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.8B
• /
• pp.706-711
• /
• 2012

The current visible light communication (VLC) systems have a short transmission distance and a low data rate. To overcome this, we studied on the method of appling MIMO technology to VLC. However, it is difficult to apply the original MIMO technology used in RF frequency to wireless VLC. In VLC system, a lens can be used to separate the transmitted signals. And, if we use an image sensor as the receiver, MIMO technology can be applied to LED wireless visible light communication. In this paper, we report an experiment of $2{\times}2$ LED wireless visible light communication using a commercial image sensor receiver. We show the experimental demonstration with a transmission length of 10.5 m and a data rate of 200 bit/s.

• Current Optics and Photonics
• /
• v.8 no.4
• /
• pp.355-365
• /
• 2024

Wavefront coding (WFC) imaging systems can redistribute the energy of an interference laser spot on an image plane sensor by wavefront phase modulation and reduce the peak intensity, realizing laser protection while maintaining imaging functionality by leveraging algorithmic post-processing. In this paper, a spiral axicon WFC imaging system is proposed, and the performance for laser protection is investigated by constructing a laser transmission model. An Airy disk on an image plane sensor is refactored into a symmetrical hollow ring by a spiral axicon phase mask, and the maximum intensity can be reduced to lower than 1% and single-pixel power to 1.2%. The spiral axicon phase mask exhibits strong robustness to the position of the interference laser source and can effectively reduce the risk of sensor damage for an almost arbitrary lase propagation distance. Moreover, we revealed that there is a sensor hazard distance for both conventional and WFC imaging systems where the maximum single-pixel power reaches a peak value under irradiation of a power-fixed laser source. Our findings can offer guidance for the anti-laser reinforcement design of photoelectric imaging systems, thereby enhancing the adaptability of imaging systems in a complex laser environment. The laser blinding-resistant imaging system has potential applications in security monitoring, autonomous driving, and intense-laser-pulse experiments.

• Journal of Integrative Natural Science
• /
• v.3 no.3
• /
• pp.168-173
• /
• 2010

Novel porous silicon chip exhibiting dual optical properties, both Frbry-Perot fringe (optical reflectivity) and photoluminescence had been developed and used as chemical sensors. Porous silicon samples were prepared by an electrochemical etch of p-type sillicon wafer (boron-doped, <100> orientation, resistivity 1 - 10 ${\Omega}$). The ething solution was prepared by adding an equal volume of pure ethanol to an aqueous solution of HF (48% by weight). The porous silicon was illuminated with a 300 W tungsten lamp for the duration of etch. Ething was carried out as a two-electrode Kithley 2420 preocedure at an anodic current. The surface of porous silicon was characterized by FT-IR instrument. The porosity of samples was about 80%. Three different types of porous silicon, fresh porous silicon (Si-H termianated), oxidized porous silicon (Si-OH terminated), and surface-derivatized porous silicon (Si-R terminated), were prepared by the thermal oxidation and hydrosilylation. Then the samples were exposed to the wapor of various organics vapors. such as chloroform, hexane, methanol, benzene, isopropanol, and toluene. Both reflectivity and photoluminescence were simultaneously measured under the exposure of organic wapors.

• Proceedings of the KSRS Conference
• /
• 1998.09a
• /
• pp.325-330
• /
• 1998

The first Korean remote sensing satellite, Korea Multi-Purpose Satellite (KOMPSAT-1), is going to be launched in 1999. This will carry a 7m resolution Electro-Optical Camera (EOC) for earth observation. The primary mission of the KOMPSAT-1 is to acquire stereo imagery over the Korean peninsular for the generation of 1:25,000 cartographic maps. For this mission, research is being carried out to assess the possibilities of automated or semi-automated mapping of EOC data and to develop, if necessary, such enabling tools. This paper discusses the issue of automated DEM generation from EOC data and identifies some important aspects in developing a for DEM generation system from EOC data. This paper also presents the current status of the development work for such a system. The development work has focused on sensor modelling, stereo matching and DEM interpolation techniques. The performance of the system is shown with a SPOT stereo pair. A DEM generated from a commercial software is also presented for comparison. The paper concludes that the proposed system creates preferable results to the commercial software and suggests future developments for successful generation of DEM for EOC data.

• Transactions on Electrical and Electronic Materials
• /
• v.16 no.2
• /
• pp.78-81
• /
• 2015

Pure ZnO and ZnO nanowires doped with 3 wt.% Ga (‘3GZO’) were grown by pulsed laser deposition in a furnace system. The doping of Ga in ZnO nanowires was analyzed by observing the optical and chemical properties of the doped nanowires. The diameter and length of nanowires were under 200 nm and several ${\mu}m$, respectively. Changes of significant resistance were observed and the sensitivities of ZnO and 3GZO nanowires were compared. The sensitivities of ZnO and 3GZO nanowire sensors measured at 300℃ for 1 ppm of ethanol gas were 97% and 48%, respectively.

• 한국연소학회:학술대회논문집
• /
• 2003.05a
• /
• pp.75-83
• /
• 2003

Diode laser absorption system is advantageous of their non-invasive nature, fast response time, high sensitivity and real-time measurement capability. Furthermore, recent advances in room-temperature, near-IR and visible diode laser sources for telecommunication, optical data storage applications are enabling combustion diagnostics system based on diode laser absorption spectroscopy. So, combined with fiber-optics and high sensitive detection strategies, compact and portable sensor system are now appearing for a variety of applications. The objective of this research is to take advantage of distributed feed-back diode laser and develope new gas sensing system. It experimentally found out that the wavelength, power characteristics as a function of injection current and temperature. In addition to direct absorption and wavelength modulation spectroscopy have been demonstrated in these experiments and have a bright prospect to this diode laser system.

• Journal of Sensor Science and Technology
• /
• v.22 no.1
• /
• pp.84-88
• /
• 2013

In this paper, the low price signal generator with capability of frequency high-resolution and variable sync pulse has implemented. It fulfils well the requirements for SS-OCT of the frequency resolution less than 1Hz, frequency stability of ${\leq}{\pm}0.5Hz$/10 min and variable sync pulse output timing. Through its performance test applied to wavelength swept laser, 120 nm sweeping range and 10 mW average optical power were obtained. This shows that the realized sine-wave generator can replace the commercial high cost and high performance signal generators employed by current SS-OCT systems.

• Current Industrial and Technological Trends in Aerospace
• /
• v.7 no.1
• /
• pp.89-96
• /
• 2009

The calibration methods of satellite visible and infrared sensors for earth observations are ummarized in this paper. Commonly used instruments for the Earth observation and their calibration ethods were briefly introduced. The optical sensors (visible and infrared) and the calibration of these nstruments were focused. With the basic principles of the calibration methods, the instrument-level alibration, which are the essential calibration process for level 1 data generation, were presented.

• Bulletin of the Korean Space Science Society
• /
• 2003.10a
• /
• pp.101-101
• /
• 2003

다목적 실용위성 1호에 탑재된 EOC(Electro-Optical Camera)는 2,000년부터 현재까지 한반도 인근 및 세계의 주요 육지 지역을 관측하고 있다. DOC는 크게 광학부(Sensor Assembly)와 전자부(Electronics Assembly)로 구성되어 있으며, 지상으로부터 입사하는 광 정보를 디지털 신호로 재구성하여 PDTS(Payload Data Transmission System)을 통해 지상으로 전송한다. EOC 광학부는 2,592개의 CCD(Charge-Coupled Device) 센서들로 구성된 선형 시스템이며, push-broom 주사 방식으로 구동된다. 한편, EOC의 임무 전, 후로 Aperture Cover Mechanism에 의해 EOC의 덮개를 덮은 상태로 짧은 시간동안 촬영을 수행, 획득된 영상 역시 지상으로 전송한다. 이러한 영상들은 EOC 영상에 포함되어 있는 암전류(Dark Current)에 대한 간접적인 정보를 제공하며, Dark Calibration Data로 정의된다. Dark Calibration Data는 지상에서 수신된 후, EOC 영상에 대한 복사 보정에 이용된다. 본 연구에서는 EOC Dark Calibration Data에 대한 분석을 통해, EOC 영상 내의 잡음 성분을 분석한다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.04a
• /
• pp.150-153
• /
• 1997

Langmuir-Blodgett(LB) technique is one of the ways of fabricating organic ultra-thin films. It is well known that It has the advantage to control the alignment and orientation of the molecules in the films. Metallo-phthalocyanines(MPcs) are sensitive to electron affinitive toxic gaseous molecules, such as NO$_2$, NO, SO$_2$. MPcs are thermal, optical, mechanical, chemical stable. Therefore, it is interesting to prepare phthalocyanine LB films containing copper as a chemical sensor for NO$_2$ and SO$_2$ gas and test their sensitivity to these toxic gases. In this study, thin films of Octa-dodecylosy copper-phthalocyanine were prepared by LB technique. $\pi$-A isotherm, transfer ratio, UV-VIS. spectroscopy of these films were investigated. Also current-voltage(I-V) characteristics of these was auto investigated.