• Spatial Information Research
• /
• v.12 no.4 s.31
• /
• pp.371-382
• /
• 2004

Continuously Operating Reference Stations (CORS) provides GPS measurements to support high accuracy CPS positioning. The CORS improves GPS positioning productivity by eliminating the requirement for GPS users to operate two receivers. Previously, this is achieved by providing data from CORS to users in post-mission mode. However, the efficiency of the CORS will be maximized by upgrading it in real-time operation using RTK-GPS surveying because users can obtain centimeter-level accuracy in real-time without operating their own reference stations. In this research, authors extracted the arbitrary point's coordinate which is using GPS CORS data, now served in RINEX FORMAT via Internet, with observation network of the existing triangulation and GPS CORS data. And then, RTK GPS was performed with this arbitrary point as reference station.

• Nuclear Engineering and Technology
• /
• v.46 no.6
• /
• pp.797-802
• /
• 2014

This study investigated the thermal hydraulic issues in the Containment Filtered Venting System (CFVS) for a long operating time using the MELCOR computer code. The modeling of the CFVS, including the models for pool scrubbing and the filter, was added to the input file for the OPR-1000, and a Station Blackout (SBO) was chosen as an accident scenario. Although depressurization in the containment building as a primary objective of the CFVS was successful, the decontamination feature by scrubbing and filtering in the CFVS for a long operating time could fail by the continuous evaporation of the scrubbing solution. After the operation of the CFVS, the atmosphere temperature in the CFVS became slightly above the water saturation temperature owing to the release of an amount of steam with high temperature from the containment building to the scrubbing solution. Reduced pipe diameters at the inlet and outlet of the CFVS vessel mitigated the evaporation of scrubbing water by controlling the amount of high-temperature steam and the water saturation temperature.

• Journal of Climate Change Research
• /
• v.7 no.1
• /
• pp.19-29
• /
• 2016

In this study, the emission intensity calculation method of GHGs was developed by considering the characteristics of the models and time series. The telematics device was installed on the car (OBD-II) to collect information on the operation conditions from each sample vehicle of public authorities. Based on emission intensity of GHGs, it presented a methodology of quantitative comparison of GHGs emission by vehicles. Collected driving information of vehicle was used for operating characteristics analysis of the target vehicle, and it was confirmed different operating characteristics through comparison of the results and previous study. GHGs emission intensity were analyzed considering characteristics of vehicle type by passenger car, van, cargo, and considering characteristics of the time series by summer, winter, and intermediate. From the analysis result, it was calculated GHGs emission intensity based on mileage ($g\;CO_2\;eq./km$) and operating time ($g\;CO_2\;eq./sec$).

• Journal of Environmental Science International
• /
• v.30 no.12
• /
• pp.1081-1092
• /
• 2021

In this study, the effect on the stability of Aerobic Granular Sludge (AGS) caused by an AGS separator was investigated. The AGS separator was a hydrocyclone. The main factors of the AGS separator were filter pore size (0.125~0.600 mm), conical-to-cylindrical ratio (1.5~3.0), and operating time (1~20 min). The AGS/mixed liquor suspended solid (MLSS) ratio gradually increased to 0.500 mm (AGS/MLSS: 84.3±3.0%). AGS was best separated at the conical-to-cylindrical ratio of 2.5 (AGS/MLSS: 84.7±3.3%). As the operating time increased, the AGS separation performance also tended to increase. The shortest AGS separator run time, but the highest AGS separation performance was 10 min (87.0±2.5%). AGS stability was evaluated by operating the selected AGS separator and sequencing batch reactor. The average removal efficiencies of TOC, TCOD_Cr, SS, TN, and TP were 95.7%, 96.9%, 93.0%, 89.0%, and 96.2%, respectively, which met the effluent standards in Korea. In addition, the AGS/MLSS ratio tended to remain constant, and the sludge volume index demonstrated a tendency to decrease from 140 mL/g to 70 mL/g. During the operation, the particles of AGS in optical microscope observations gradually increased.

• The Journal of the Korea Contents Association
• /
• v.7 no.8
• /
• pp.31-40
• /
• 2007

Recently, Embedded systems are different with the past as loading of a simple application program that executed specific functions according to the use and are evolved in the digital convergence integrated multimedia functions and then the complication of the application program is remarkably increased. This application program is combined and evolved with many application program in accordance with the demand of the age. For develope and manage this developing application is necessary standardized interface between developer and manager. POSIX was developed as the standard of the operating system in the standard interface which has the open system structure in computing system, and there is a posix.4 to standard for the system demands the loading of real-time operating system like a digital convergence devices. In this paper, we present the contents of designing and implementing the real-time operating system UbiFOSTM to wrapper for supporting the POSIX.4. Also, Experimental results show that implemented wrapper to application program standardizing POSIX.4 in linux and UbiFOSTM is slight only $3{\sim}9{\mu}s$.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.11
• /
• pp.1922-1928
• /
• 2008

The thermal rating of a conductor are maximum continuous current capacity and short time emergency current capacity. The overload operation for a faults have an effect on a conductor lifetime. Its time duration and overload level are limited to facility conditions of transmission lines. The short time emergency current capacity in KOREA observe the KEPCO's DESIGN RULE 1210, but its rules are not included to concept of an allowable short time duration. This papers are described to the calculation concept of short time emergency current capacity considering a time duration and an overload level. And we suggested a operation grouping and its maximum conductor temperature considering facility conditions - conductor lifetime, stability of connection points, conductor height above ground and clearance, in the operating and new T/L.

• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.12
• /
• pp.630-640
• /
• 2007

As the range of sensor network's applicability is getting wider, it creates new application areas which is required real-time operation, such as military and detection of radioactivity. However, existing researches are focused on effective management for resources, existing sensor network operating system cannot support to real-time areas. In this paper, we propose the ${\mu}TMO$ model which is lightweight real-time distributed object model TMO. We design the real-time sensor network operation system ${\mu}TMO-NanoQ+$ which is based on ETRI's sensor network operation system Nano-Q+. We modify the Nano-Q+'s timer module to support high resolution and apply Context Switch Threshold, Power Aware scheduling techniques to realize lightweight scheduler which is based on EDF. We also implement channel based communication way ITC-Channel and periodic thread management module WTMT.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.11
• /
• pp.1060-1068
• /
• 2011

In this paper, we present a development of an Operation Flight Program(OFP) on Real Time Operating System(RTOS) and Java Virtual Machine(JVM) of real-time and embedded system. The OFPs are consisted of Multi Function Display(MFD), Integrated Up Front Control(IUFC), Head Up Display(HUD) and Fire Control(FC) and loaded for localization Mission Computer(MC). This paper describes the structure and implementation of a MFD OFP and middleware based on Java.

• Convergence Security Journal
• /
• v.22 no.2
• /
• pp.3-8
• /
• 2022

Security threats occur from the outside, but more often from the inside. In particular, since the internal user knows about the information service, the security threat damage caused by the internal user is greater. In this environment, the actions of all users accessing information services should be monitored and recorded in real-time. However, the current operating system records only the logs of system and application execution, so there is a limit to monitoring user behavior in real-time. In such a security environment, damage may occur due to user's unauthorized actions. To solve this problem, this study proposes an architecture that monitors user behavior in real-time in a Linux environment. As a result of verifying the function to confirm the effectiveness of the proposed architecture, the console input values and output angles of all users who have access to the operating system are monitored in real-time and stored. Although the performance of the proposed architecture is somewhat slower than the identification and authentication functions provided by the operating system, it was confirmed that the performance was not at a level that users would recognize, and thus it was judged to be sufficiently effective. However, since this study focuses on monitoring the console behavior, it is impossible to monitor the behavior of user applications running in the background, so additional research is needed.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.13 no.3
• /
• pp.229-236
• /
• 2008

The deep-sea miner is the tracked vehicle system which drives on the deep-seabed and gathers a manganese nodules. The miner is operated by remote control in real-time by the station of surface vessel. So operating S/W is a important part of miner remote operating. At present, the test miner has been designed and manufactured for near-shore sea-test. The test miner consists of mechanical parts, and electric-electronic parts. Because those parts should be controled and monitored remotely, operating S/W for control and monitoring is necessary by all means. In this paper, real-time operating S/W for a control and monitoring of the test miner was designed and developed using PXI, embedded controller and LabVIEW. This real-time operating S/W was developed for an efficient test of test miner in a near seabed area. Moreover, database management system(DBMS) was developed too for the data management of test miner monitoring using MS SQL and LabVIEW.