• 한국작물학회지
• /
• 제5권1호
• /
• pp.57-64
• /
• 1969

1. 단백질: 오페이크-2 옥수수에서 비록 적은 단백질함량이 분석되었지만 정상적인 옥수수와 오페이크-2 옥수수 사이에 있어서 유의적인 상관관계는 없었다. 2. 라이신: 라이신 함량역시 품종에 따라 다르며 오페이크-2 옥수수에 있어서의 라이신 함량은 품종간에 큰 차이가 없었다. 정상적인 옥수수와 오페이크-2 옥수수 사이에 있어서 라이신 함량간에는 유의적인 상관관계가 없었다. 3. 분리비율: 오페이크-2 옥수수는 열성단일 인자로서 대개 나타났다. 표현형에 있어서는 사용한 품종에 따라 다르게 나타났다. 오페이크-2 옥수수는 이병성이 약한 듯 하였으며 종실중이 가벼웠다. 4. 오페이크-2 인자와 후라워리-2 인자는 대립유전인자가 아니다. 5. 배우자적 불화합성과 웅성 불임이 오페이크 교배 조합에서 나타났다.

• 한국작물학회지
• /
• 제34권2호
• /
• pp.155-162
• /
• 1989

수도 품질다양화를 위한 품종육종에 이용하고자 India 품종 Pokhareli Mashino에서 발견된 저 amlose opaque형질에 대한 배유의 이화학적 특성을 조사하였다. 얻어진 결과를 요약하면 다음과 같다. 1. Opaque 특성을 가진 계통 CB 243은 쌀의 외관적 특성은 찰벼와 같았으나 요드용액에 대한 반응은 자청색으로 메벼와 같았다. 2. Opaque쌀의 전분형태는 찰·메벼와 차이가 없이 다각형입자이었으나 전분입의 크기는 타 품종에 비하여 현저히 작았다. 3. Opaque 쌀 전분입의 결정구조는 A형을 나타냈다. 4. Opaque쌀의 총 단백질함량은 13.06％로서 다른 품종들에 비해 약 50％정도 높았으나 아미노산 조성비율은 차이가 없었다. 5. Opaque쌀의 알카리 붕괴도는 1.7％ KOH 용액에서 1.8정도로 다른 품종에 비해 매우 낮았다. 6. Opaque쌀의 전체 수분흡수량과 흡수속도는 찰과 고 amylose계통에 비하여 적고 늦었으며 메벼 통일과 비슷하였다. 7. Opaque쌀의 amylogram 특성은 호화 개시시간이 36분, 최고점도 980BU,최저점도 500BU, Steback - 260BU, Consistency 200BU로 찰과 메의 중간값을 보였다.

• 대한치과보철학회지
• /
• 제35권1호
• /
• pp.144-164
• /
• 1997

The purpose of this study were to investigate the chemical composition, mean particle size, linear thermal expansion coefficient and metal-bonding strength of the regular opaque powder and core powder. In this study, 4 types of ceramic powders, namely Duceram Jacket Opaque powder, Duceram Opaque powder, Vita Hi-Ceram powder, Vita VMK Paint On-88 powder were used. Chemical composition was evaluated by EDS(Energy Dispersive X-ray Spectrophotometer, Oxford QX-2000, England), particle size was measured by MALVERN Instruments(MALVERN Instruments SB. OC., U.S.A.. ad linear thermal expansion coefficient was measured by dilatometer(Motoyama, Japan). Bond strength was measured by the Universal tsting machine(Istron Co., Ltd., U.S.A.). The Results were as follows : 1. Through recognition of the relative difference in chemical composition between the core powder and the regular opaque powder, the difference in the proportion of $Al_2O_3$ in each type of material is demonstrated ; Duceram Jaket Opaque powder : 30.16%, Duceram Opaque powder : 16.60%, Vita Hi-Ceram : 63.64%, Vita VMK Paint-On 88 : 16.16%. 2. There was no significant difference in the proportion of metal-bonding materials between the core powder and the regular opaque powder. 3. In the regular opaque powder, alkaline materials were incoporated in order to increase the coefficient of thermal expansion. 4. In the particle size analysis, there was no significant difference in mean particle size or in the particle size distribution between the core powder and the regular opaque powder. 5. In the thermal expansion test for temperature range of $25-600^{\circ}C$, the regular opaque powder had higher coefficient of thermal expansion than that of core powder. 6. In the 4 point flexural bending test, there was no statistically significant difference in the mean bond strength between the core powder and the opaque powder among the Duceram products.

• 대한치과의사협회지
• /
• 제49권4호
• /
• pp.203-210
• /
• 2011

The aims of this study were to evaluate the adequate thickness of opaque resins for situations such as an oral black cavity and discolored tooth structure, as well as the translucency of each opaque material at various thicknesses. Six opaque-shade composite resins (Z-350 OA3, Amelogen Universal A2O, Esthet-X A2O, Esthet-X A4O, Charmfil UO and Aelite Universal OA3) were prepared in metal molds with a hole of 8 mm in diameter and various thicknesses (0.5mm, 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0 mm and 4.0mm). Four backgrounds (white tile, black tile, C4 shade porcelain and opaque resin itself) were used to determine the translucency parameter (between black and white backgrounds). and to mimic a black oral cavity (between black and opaque resin backgrounds) and a discolored tooth structure (between C4 and opaque resin backgrounds). Color measurements were made by a colorimeter to determine the CIELAB values of each specimen with each background and to calculate the translucency parameter and ${\Delta}E^*$ value difference among the specimens on the backgrounds. The translucency parameter and ${\Delta}E^*$ obtained between black and opaque resin backgrounds decreased in similar pattern as thickness increased. A C4 background was masked by resin thicknesses of 0.5-1.0mm, while a black background required thicknesses of 1.0-2.0mm. Adequate knowledge about differences in the optical character like translucency of the materials used is essential, together with the accumulated experience of the individual clinician.

• Restorative Dentistry and Endodontics
• /
• 제32권4호
• /
• pp.356-364
• /
• 2007

본 연구에서는 현재 임상에 사용되고 있는 opaque shade 복합레진의 opacity와 배경색 차단 능력을 평가하였다. 24개의 배경 시편 (직경 5.5 mm, 두께 3 mm)을 Tescera ATL Root dentin Mustard로 제작하고 배경판 레진 상에 7종의 opaque shade 복합레진 (Universal composite, Filtek Z350, Charisma, Clearfil ST, Palpaque Estelite, Esthet-X, Metafil Flo)과 통상적인 복합레진인 Estelite Sigma를 3.0 mm 적층 수복하였다. 적층된 opaque shade 복합레진의 표면 색상을 측정한 후, 적층한 두께가 0.5 mm가 될 때까지 0.3 mm 간격으로 적층된 면을 연마하면서 각 두께에서의 표면 색상을 측정하였다. 연마 후 각 두께에서 측정된 opaque shade 복합레진의 표면 색상과 적층 전의 배경판 색상, 그리고 연마전의 표면 색상 간의 색차를 계산하여 두께에 따른 배경색 차단 능력을 평가하였다. 또한 1 mm 두께의 시편을 제작하고 opacity를 측정하여 다음의 결과를 얻었다. Opaque shade 복합레진의 opacity는 Clearfil ST, Metafil Flo, Filtek Z350, Palpaque Estelite, Universal composite, Charisma, Esthet-X 순으로 감소하였다 (p < 0.05). Opaque shade 복합레진의 두께의 감소에 따라 $L^*$ 값은 감소하는 양상을, $a^*$ 값은 증가하는 양상을 보였다. 연마 전 표면 색상과 연마 후 각 두께에서의 색차 (${\Delta}E^*$)는 Clearfil ST 군은 모든 군에서, Metafil Flo 군은 1.0 mm 이상에서 3 이하의 색차를 보였다. 배경 색상에 대한 각 opaque shade 복합레진의 색차는 모든 두께에서 10 이상의 색차를 보였으며, Clearfil ST와 Metafil Flo가 가장 큰 색차를 보였다 (p < 0.05). 현재 임상에 사용되고 있는 opaque shade 복합레진들은 제조사에 따라 서로 다른 opacity와 색상을 가진다. 따라서 재료의 선택에 있어 적용하고자 하는 병소의 특성에 따라 opaque shade 복합레진의 opacity와 색상에 대한 충분한 고려가 필요하리라 사료된다.

• 한국작물학회지
• /
• 제22권1호
• /
• pp.16-19
• /
• 1977

옥수수 배유내의 Lysine함량을 배이상으로 증가시킨다는 오페이크-2옥수수의 사양가치를 확인코저 황옥002에 오페이크-2유전원자를 Back cross한후 분리 집단내에서 보통립과 오페이크-2립을 분류하여 흰쥐에다 사양시험하였던 결과 24일간의 사양기간에 오페이크-2옥수수를 결여한 흰쥐의 체중증가는 보통옥수수를 결여한 흰쥐의 체중 증가 31.4g보다 28%나 더 무거웠다. 오페이크-2옥수수의 사양효과는 시험개시 후 3일부터 통계적인 유의차를 나타냈으며 일당 평균체중증가율에 뚜렷한 차이를 인정할 수 있었다. 즉 보통옥수수를 먹인 경우의 일당 평균체중증가율은 1.52 그람이었는데 반하여 오페이크-2옥수수를 먹인 경우에는 1.87그람이었다.

• 대한치과보철학회지
• /
• 제41권2호
• /
• pp.148-159
• /
• 2003

Statement of problem Metal-ceramic restorations have been used extensively by dental clinicians for nearly 40 years. Strength an functional ability of metal-ceramic restorations are proved to be satisfying, However esthetics and biocompatibility of metal alloy which is used in metal-ceramic restoration is not ideal. Using pure gold as an alternative, have advantage of esthetics, biocompatibility over conventional metal alloy. But there had been little article which studied on the color effect of pure gold on fual porcelain color. Purpose The purpose of this study was to spectrophotometrically evaluate the difference between color of metal alloy(Au-Pt, Ni-Cr) and pure gold, during color masking procedure with opaque porcelain and to analyze the differences, Material and Methods Three types of metal - base metal(Ni-Cr), high gold alloy(Au-Pt), pure gold(GES) - specimen were fabricated 1cm in diameter. Four steps were established - after finishing, after pre-coditioning, after application of first opaque porcelain(0.08mm in thickness), after application of second opaque porcelain(0.15mm in thickness)- and tested color with spectrophotometer every each steps and analyzed with $CIEL^*a^*b^*$ color order system. One-Way ANOVA test was used to and out if there were significant differences between groups tested and Shaffe multiple comparison was used to identify where the differences were. Results 1. After finishing and pre-conditioning, pure gold(GES) group showed most high values in $L^*,a^*,b^*$. 2. After application of first opaque porcelain(0.08mm in thickness), after application of second opaque porcelain(0.15mm in thickness), pure gold(GES) group showed the least difference in $L^*,a^*,b^*$ values and the lowest ${\Delta}E$ value(${\Delta}E$=0.63). 3. After application of first opaque porcelain and after application of second opaque porcelain differences that were significant (P<0.05) between groups were found only in $a^*$ values. 4. Base metal alloy group showed the lowest $a^*$ value in test after application of first opaque porcelain and the highest value in test after application of first opaque porcelain Conclusion Pure gold group and high gold group showed higher $a^*$ values than base metal group when tested after 0.08mm thickness of opaque porcelain was applied and pure gold group showed much similar $L^*,a^*,b^*$ values between 0.08mm thickness and 0.15mm thickness of opaque porcelain. This meant that pure gold was more easily masked by opaque porcelain than the other two groups.

• 대한치과기공학회지
• /
• 제22권1호
• /
• pp.39-47
• /
• 2000

This study is the know the difference bond strength according to painting method of Opaque porcelain. Among Porcelain powder for Porcelain, Noritake powder, Bonding agent 1 class and metal are selected as Base metal alloy. And painting method of Opaque porcelain is divided by 4 groups : PG, WG, NG and DG. Also it is to manufacture 24 sheets of Specimen by 6 each every method and to measure Crack-initiation Strength of Metal-porcelain and it is to observe it by Scanning electron microscope. I come to get a conclusion as follows. 1. As for Debonding strength of every experiment groups, it showed that WS group which executed Wash bake had highest value, 44.25MPa and NG group which used Normal powder had value, 42.11MPa and DG group which used Bonding agent had value, 35.88MPa and PG group which used Paste opaque had value, 35.39MPa. 2. In four painting methods of Opaque porcelain, PG group, WG group, NG group and DG group, there is no significant difference statistically in Crack-initiation Strength. 3. As a result of observing fracture surface with Scanning electron microscope, it was showde that PG group remained a lot of particle of porcelain on the surface of metal than WG group, NG group and DG group.

• 대한치과기공학회지
• /
• 제31권1호
• /
• pp.23-36
• /
• 2009

The goal of esthetic restoration is to achieve morphologic, optical, and biologic acceptance. Creation of a natural looking ceramic restoration, which blends harmoniously with surrounding dentition, is not always achieved. A successful color match is an important aspect of any esthetic dental restoration. Since natural enamel has inherent translucency, it is important that ceramic restorations reproduce the translucency and color of the natural teeth. However, the final color match of porcelain crowns to adjacent natural dentition remains some problem. Difficulties related to color matching arise from the structural differences that exist between metal ceramic crowns and natural teeth, the limited range of available ceramic shades, inadequate shade guides, different types of metal alloys, repeated firing, the condensation technique, and varying compositions of ceramic materials. Many factors contribute to the esthetic success of dental restoration: optical properties such as color and its elements of hue, value, and chroma; translucency and opacity; light transmission and scattering; and metamerism and fluorescence. The purpose of this study was to determine the color changes of metal-ceramic system with different veneering porcelain powder after repeated firing. The objectives of this in vitro study were to measure the lightness($L^*$), chromaticity($a^*$), chromaticity($b^*$), chroma($C^*$), hue(h), reflectance(%), color difference(${\Delta}E$). The following conclusions were obtained: 1. An increase in the number of firings resulted in decrease in lightness($L^*$) but increase in chromacticity($a^*$) with all porcelain. After the second sintering resulted in decrease in chromacticity($b^*$) with opaque-dentin porcelain and dentin porcelain but in increase with enamel porcelain and translucency porcelain. And after the second sintering resulted in decrease in chroma($C^*$) with opaque-dentin porcelain and dentin porcelain, but on the whole side in decrease with enamel porcelain and translucency porcelain. 2. After the second firing, a increase in the number of firings resulted in decrease reflectance(%) in all wavelength. 3. There were noticeable color differences(${\Delta}E$) between first sintering and multiple firings(dentin porcelain: 5.29~8.15, opaque-dentin porcelain: 4.83~8.2, enamel porcelain: 8.93~13.15, translucency porcelain: 9.37~12.91), but the color difference(${\Delta}E$) after second sintering were down to 4.87 in all porcelain. 4. Given the NBS Criteria, a 'trace' was not found this study but a 'slight' was found 2-3, 3-5 in dentin porcelain, 2-3 in opaque-dentin porcelain, 3-5, 5-10 in enamel porcelain and translucency porcelain, a 'noticeable' was 2-5, 3-10, 5-10 in dentin porcelain and opaque-dentin porcelain, 2-3, 2-5, 3-10 in enamel porcelain 2-3, 3-10 in translucency porcelain, an 'appreciable' was 1-2, 1-3, 2-10 in dentin porcelain 1-2, 1-3, 2-10, 3-10 in opaque-dentin porcelain, 2-10 in enamel porcelain, 2-5, 2-10 in translucency porcelain, a 'much' was 1-5, 1-10 in dentin porcelain and opaque-dentin porcelain, 1-2, 1-3, 1-5 in enamel porcelain 1-2, 1-3, 1-5, 1-10 in translucency porcelain, a 'very much' was 1-10 in enamel porcelain.

• 대한치과보철학회지
• /
• 제34권3호
• /
• pp.475-488
• /
• 1996

The opaque porcelain layer of porcelain-fused-to-metal(PFM) restoration is critical for the success of PFM restoration because it is the first layer placed over the treated alloy. But, the methods of opaquing technique have not been confirmed. Usually, the one layer method and two layer method have been used for the application of opaque porcelain. In the past, alloys with porcelain veneers which have been used successfully have contained various precious metals. Recent increase in the cost of precious metals stimulates considerable interest in nonprecious alloys. Although nickel-chromium alloys and nickel-chromium-beryllium alloys have been widely used, the use of cobalt-chromium alloys would be gradually increased with elimination of any potential risk of nickel-related allergic responses and/or beryllium-related toxic responses. This investigation examined one- and two-layer opaque porcelain applications to determine the effect on the bond strength of titanium added cobalt-chromium metal ceramic alloy. Bond strength of Ceramco II porcelain to titanium added cobalt-chromium alloy(2Dentitan) and gold-platinum-palladium alloy(Degudent H) were evaluated by direct shear bond strength test with Instron universal testing machine. The results were as follows; 1. When the mean shear bond strength of each experimental group were compared in $0.25cm^2$ unit area, the titanium added cobalt-chromium alloy/two layer method exhibited the greatest strength(79.7kg), followed by titanium added cobalt-chromium alloy/one layer method(76.2kg), gold-platinum-palladium alloy/two layer method(71.4kg), gold-platinum-palladium alloy/one layer method(64.2kg). 2. No significant differences in bond strength were recorded between the two opaquing techniques for gold-platinum-palladium alloy and titanium added cobalt-chromium alloy. 3. No significant differences in bond strength were recorded between the gold-platinum-palladium alloy and the titanium added cobalt-chromium alloy.