• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.97-98
• /
• 2007

A wide range of data is available as too causes of large power transformers. Although the percentage of transformer component failure rates vary, all data shows that the top three failure mechanisms are Load Tap Changers (LTC), Bushings and Windings. To date, the most common methods employed to determine the health of a transformer are off line tests and online temperature monitoring, winding hotspot calculations and dissolved gas analysis.

• Structural Engineering and Mechanics
• /
• 제47권3호
• /
• pp.361-381
• /
• 2013

A Bayesian probabilistic method is proposed for online estimation of the process noise and measurement noise parameters for Kalman filter. Kalman filter is a well-known recursive algorithm for state estimation of dynamical systems. In this algorithm, it is required to prescribe the covariance matrices of the process noise and measurement noise. However, inappropriate choice of these covariance matrices substantially deteriorates the performance of the Kalman filter. In this paper, a probabilistic method is proposed for online estimation of the noise parameters which govern the noise covariance matrices. The proposed Bayesian method not only estimates the optimal noise parameters but also quantifies the associated estimation uncertainty in an online manner. By utilizing the estimated noise parameters, reliable state estimation can be accomplished. Moreover, the proposed method does not assume any stationarity condition of the process noise and/or measurement noise. By removing the stationarity constraint, the proposed method enhances the applicability of the state estimation algorithm for nonstationary circumstances generally encountered in practice. To illustrate the efficacy and efficiency of the proposed method, examples using a fifty-story building with different stationarity scenarios of the process noise and measurement noise are presented.

• Human Ecology Research
• /
• 제53권6호
• /
• pp.641-654
• /
• 2015

This study identifies and tracks changes gender differences in adolescent users' problematic online behavior. This study used Korea Youth Panel Survey (KYPS), which has tracked respondents over 7 years, with self-control theory and social learning theory applied as a theoretical framework. The model included individual-level variables such as self-control and respondent's experience of problematic behavior (offline), as well as socialization variables such as the number close friends who engaged in problematic offline behavior, parent-child relationships, and parental monitoring. Dependent variables included problematic online behavior, unauthorized ID use (ID theft) and cyberbullying (cursing/insulting someone in a chat room or on a bulletin board). Control variables consisted of academic performance, time spent on a computer, monthly household income, and father's educational attainment. Random and fixed effects models were performed by gender. Results supported self-control theory even for the within-level analysis (fixed effects models) regardless of gender, while social learning theory was partially supported. Only peer effects were found significant (except for unauthorized ID use) among girls. Year dummy variables showed significant negative associations; however, academic performance and time spent using computers were significant in some models. Father's educational attainment and monthly household income were found insignificant, even in the random effects models. We also discuss implications and suggestions for future research and policy makers.

• Transactions on Electrical and Electronic Materials
• /
• 제7권5호
• /
• pp.247-251
• /
• 2006

The traction DC feeder cable is one of the key devices for the safety operation of subway system, but for low voltage DC feeder cable (<3000 V) for subway, little attention has been paid by investigators on its online monitoring technology. With an introduction of cable laying and operation environment for the cable, this paper investigated the on-line monitoring technology of 1500 V DC feeder cable of subway. Firstly, in the text, the fault model of 1500 V DC cable was proposed based on the analysis of the fault type of the DC feeder cable, and then put forward synthetically on-line monitoring discharge signal and DC leakage current signal to assess DC feeder cable insulating state. The results of laboratory experiment prove that the proposed methods are feasible and can be implemented on-line monitor on DC feeder cable of subway.

• 한국정밀공학회지
• /
• 제17권12호
• /
• pp.54-60
• /
• 2000

Research about tool condition monitoring has been done until now for product automation and unmaned system. But it is hard to apply it to the industrial field due to its cost and reliability. This paper presents the new method of tool wear measurement using Marpos gauge. This is a kind of touch sensor, so its cost is lower than vision system. And it is not affected by dust and illumination, which are important in vision system. This proposed method use tool clearance angle to measure flank wear. Experimental results compared with vision system shows that this method is available for tool condition monitoring system.

• 한국공작기계학회논문집
• /
• 제11권2호
• /
• pp.103-111
• /
• 2002

Out of all metal-cutting process, the hole-making process is the most widely used. It is estimated to be more than 30% of the total metal-cutting process. It is therefore desirable to monitor and detect drill wear during the hole-drilling process. One important aspect in controlling the drilling process is monitoring drill wear status. There are two systems, Basic system and Online system, to detect the drill wear. Basic system comprised of spindle rotational speed, feed rates, thrust torque and flank wear measured by tool microscope. Outline system comprised of spindle rotational speed feed rates, AE signal, flank wear area measured by computer vision, On-line monitoring system does not need to stop the process to inspect drill wear. Backpropagation neural networks (BPNs) were used for on-line detection of drill wear. The output was the drill wear state which was either usable or failure. This paper deals with an on-line drill wear monitoring system to fit the detection of the abnormal tool state.

• 한국콘텐츠학회논문지
• /
• 제10권1호
• /
• pp.114-121
• /
• 2010

본 연구에서는 CEP(Complex Event Processing) 기법을 사용하여 온라인 게임에서 사용자 악용을 실시간 감지하기 위한 효율적인 방법을 제시한다. CEP는 대규모 정보시스템에서 발생하는 복잡한 이벤트 패턴을 발견하는 기법이다. 본 연구에서는 게임 사용자가 게임 서버에 접속하여 게임을 수행하는 과정에서 발생하는 이벤트들을 관찰하면서 규칙에 위배되는 행위를 검출하기 위하여 CEP 기법을 사용한다. 사용자들이 자주 악용할 가능성이 있는 이벤트 패턴을 미리 복합 이벤트로 설정하여 CEP 엔진에 등록해 두고, CEP 엔진은 게임 서버에서 발생하는 이벤트를 실시간에 필터링하여 사용자 악용을 감시하는 방법이다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권1호
• /
• pp.124-130
• /
• 2014

In highly reliable and durable systems, failures due to aging might result in catastrophes. Aging monitoring techniques to prevent catastrophes by predicting such a failure are required. This paper presents a scan-based on-line aging monitoring scheme which monitors aging during normal operation and gives an alarm if aging is detected so that the system users take action before a failure occurs. We illustrate our modified scan chain architecture and aging monitoring control method. Experimental results show our simulation results to verify the functions of the proposed scheme.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.478-479
• /
• 2007

With increasing interest in the reduction of cost for operation and maintenance of overhead catenary system, various methods of condition monitoring have been developed. In this paper, we proposed network-based telemetry system for condition monitoring in railway and acquired data from any kind of sensor in catenary line and structure at high voltage. This development gives the solution for online condition monitoring in railway. To check the validity of our approach in terms of application, we realized network-based telemetry System.

• 국제학술발표논문집
• /
• The 2th International Conference on Construction Engineering and Project Management
• /
• pp.50-60
• /
• 2007

The endeavor of this paper focuses on designing a monitoring system to provide a cost-effective solution on quality assurance for construction projects. The construction site monitoring system integrates a long-range wireless network, network cameras, and a web-based collaborative platform. The users of the system could obtain the most updated status of construction sites, such as behaviors of workers, project progress, and site events anywhere with Internet connectivity. It was carefully configured in order to maintain the reliability under the reactive conditions of the construction sites. This paper reports the architecture of the monitoring system and reviews the related technologies. The system has been implemented and tested on a construction site and promising results were obtained.