Song, Jae-Won;Leesungbok, Richard;Park, Su-Jung;Chang, Se Hun;Ahn, Su-Jin;Lee, Suk-Won
The Journal of Advanced Prosthodontics
/
제9권4호
/
pp.315-320
/
2017
PURPOSE. The aim of this investigation was to analyze the dimensions of clinical crowns and to classify the crown and the gingival type in the anterior teeth in Korean young adults. MATERIALS AND METHODS. Casts were obtained from 50 subjects ranging in age from 24 to 32. Measurements of length and width were made on the casts using a pair of digital calipers on the entire dentition. Crown thickness and papilla height were also measured and MDW/CL (mesiodistal width to clinical length) and CW/CL (cervical width to clinical length) ratios of the maxillary anterior teeth were calculated. The K-clustering method was used for CW/CL to classify the anterior tooth shape into three groups (tapered, ovoid, and square), and one-way analysis of variance and Duncan's post-hoc comparison were used to evaluate statistical significance between the groups. Pearson's correlation analysis was performed between tooth shape and papillary height (PH) to demonstrate the correlation between tooth shape and gingival morphological characteristics. RESULTS. The average length of the maxillary central incisors was 9.89 mm; the mesio-distal width was 8.54 mm; and the ratio of width/length was 0.86 in Korean young adults. The average bucco-palatal thickness of the central incisor was 3.14 mm at the incisal 1/3 aspect. Ovoid type was the most common tooth shape (48%), followed by square type (29%) and taper type (23%) in the central incisors of Korean young adults. Tooth shape and gingival type were correlated with each other. CONCLUSION. New reference data were established for tooth size in Korean young adults and the data show several patterns of tooth shape and gingival type. Clinicians should diagnose and treat based on these characteristics for better results in the Korean population.
본 연구는 치과위생사를 대상으로 감성리더십이 직무만족에 미치는 영향을 파악함으로써, 치과위생사가 갖추어야 할 소양 중의 하나인 감성리더십을 통해 직무만족도를 향상시키는 방안을 도출하고자 연구하였다. 연구기간은 2018년 4월 16일부터 4월 28일까지 전라북도에 소재한 치과병·의원에 근무하고 있는 치과위생사 237명을 대상으로 SPSS 12.0 프로그램을 사용하여 빈도, 기술통계, t-test, ANOVA, 다중회귀분석을 실시하였다. 연구대상자의 감성리더십 각 요인 중 관계관리능력은 3.15로 가장 낮았고, 직무만족은 평균 3.43 였고, 동료와의 관계는 4.15로 가장 높아 직장 내 동료와의 관계가 잘 이루어지고 있었고, 업무처리방침과 급여수준은 2.49~2.98로 낮았다. 결혼상태, 자기인식능력, 자기관리능력, 관계관리능력은 직무만족에 영향을 미쳤으며, 다중회귀모형의 설명력은 26.5%이며 모형의 타당성은 통계적으로 유의하였다(p<0.05). 이상의 연구결과를 토대로 치과위생사의 직무만족에 감성리더십의 자기인식능력, 자기관리능력, 관계관리능력이 상호 관련성이 깊은 것으로 나타났다. 따라서, 치과위생사의 감성리더십을 강화시켜 타인의 감정을 공감하고 잘 이해하고 관리하는 능력을 향상시킬 수 있는 감성리더십 프로그램 개발과 교육 및 훈련이 이루어지도록 제도적 뒷받침이 이루어져야 하겠다.
This study purposed to analyze dental hygienists' job satisfaction according to their clinical career as an effort to enhance their job satisfaction and quality and to provide basic materials for dental hygienists' effective job performance. For this purpose, we surveyed 120 dental hygienists working at dental hospitals and clinics in Busan during the period from the $1^{st}$ February to $31^{st}$ March 2009 by using a self administered questionnaire. Job satisfaction was measured using a 5 point Likert scale ranging from 'Absolutely yes' (5 points) to 'Yes' (4), 'So so' (3), 'No' (2), and 'Not at all' (1), and a high score indicates high degree of satisfaction. When it testd the reliability of the job satisfaction scale was tested, Cronbach's Alpha (${\alpha}$) was 0.85 which indicates the instrument is sufficiently reliable. Data collected were analyzed with SPSS. We performed frequency analysis in order to examine the subjects' demographical characteristics, and Chi square and one way ANOVA to examine their perception of their job, job satisfaction, and their aptitude and status as a dental hygienists' according to clinical career. The results of this study were as follows. 1. The longer clinical career the dental hygienists had, the more they thought that they had aptitude as a dental hygienist (p<0.05). 2. The dental hygienists' turnover intention was different according to clinical career (p<0.01). 3. The longer clinical career the dental hygienists had, the more satisfied they were when they were working at a dental hospital or clinic equipped with convenience facilities (change room, lounge, etc.) (p<0.01). 4. The longer clinical career the dental hygienists had, the more power to make decisions they had and the more acknowledgement and trust they received from dentists (p<0.01). 5. Satisfaction with duty coordination was low in general, but it grew higher with increase in clinical career (p<0.01). 6. The longer clinical career the dental hygienists had, the more satisfied they were with patients' appreciation of their treatment (p<0.01). In addition, their time and opportunities to discuss with dentists were different according to clinical career, and their satisfaction with the items was higher when their clinical career was long (p<0.01). 7. As to their perception of dental hygienists' potential for development, they generally believed that they had potential for future growth with the expansion of their work scope (M=3.73). The longer clinical career the dental hygienists had, the more satisfied the more power to make decisions they had and the more acknowledgement and trust they received from dentists and their time and opportunities to discuss with dentists when they were working at a dental hospital or clinic equipped with convenience facilities (change room, lounge, etc.). The longer clinical career the dental hygienists had, the more they thought that they had aptitude as a dental hygienist. In conclusion, the longer clinical dental hygienists' Career had, satisfaction was able to take a highness to a dental hygienist occupation.
월리엄 모리스(1834-1896)는 19세기 영국의 지식인중에서도 가장 다재다능한 사람이었다. 그의 사후 백년이 지났지만, 화가 디자이너, 제조업자, 상회경영자, 시인, 작가, 출판인, 인쇄업자, 수집가, 교사, 자원보호론자, 사회운동가, 환경보호론자 둥으로 활약했던 그의 삶과 일은 아직도 전세계에 영향을 미치고 있다. 모리스는 오늘날 그의 매력적인 컬러풀한 패턴으로 가장 잘 알려져 있다. 1861년 모리스는 모리스 마샬 포크너상회(1875년부터 모리스상회)를 설립하여, 스테인드 글라스를 비롯한 타피스트리, 카펫, 프린트물, 직물 둥을 생산해 냈는데, 그러한 디자인은 영국 디자인의 향방에 큰 지침을 주었다. 모리스의 초기의 텍스타일 디자인은 비전문가로서 자신의 필요에 의한 자수작업이었으나, 곧 상업적인 기초를 갖고 텍스타일 제품을 생산해내기 시작한다. 모리스는 제작을 적절히 콘트롤하기 위해서 다양한 텍스타일의 테크닉을 배웠는데, 처음에는 염색, 블록 프린팅, 수직 자카드 둥을 배웠고, 나중에는 카펫과 타피스트리까지 배웠다. 이러한 비상한 제작에 대한 직접적인 참여는, 모리스와 당시의 다른 디자이너들과의 차이점이었고, 그의 성공에도 크게 기석하게 된다. 모리스의 텍스타일 디자인은 자수, 염색, 직물, 카펫 타피스트리 둥의 작품으로 상업적으로 생산되어 널리 상찬을 받았고, 오늘날에도 복제되고 있다. 이것은 그의 디자인이 시대를 초월한 질과 테크닉으로 존중되고 있기 때문이며, 또한, 그의 패턴의 세부에서도 볼 수 있는 자연에 대한 사랑의 중요성 때문이다.
본 연구는 가연성탱크 화재발생시 하나의 포 비례혼합기에서 분기헤더를 거쳐 다수의 소화지역 분기방식 포 소화설비의 분기헤더에서 저장탱크 하단부 입상관 까지의 포수용액 배관단면적 감소에 따른 통과유량 감소로 혼합비가 허용범위를 벗어날 때 적정농도의 포수용액 방출에 효과적인 방법을 확보하는데 궁극적인 목적이 있다. 이를 위해 기설치 포 소화설비의 유량변동에 따른 혼합비 변동원인 분석 및 일정혼합비 보상방법을 찾아보고, 포 비례혼합기 벤츄리 폼챔버 오리피스 및 미터링 오리피스 교체실험을 통해 원액흡입배관 단면적을 확장시킬 수 있는 미터링 오리피스 교체실험이 포 소화설비 혼합비 개선에 가장 효과적인 방안임을 입증하였다.
The principal reasons for applying a pigment coating to paper are to improve appearance and printability. The pigment coating provides a surface that is more uniform and more receptive to printing ink than are the uncoated fibers and, in turn, both facilitates the printing process and enhances the graphic reproduction. The improvement in print quality is readily apparent, especially in image areas or when multiple colors are involved. Although pigment coating of paper is to improve the printability, coated paper is not completely free from printing defects. Actually there are a number printing defects that are observed only with the coated papers. Among the printing defects that are commonly observed for coated papers, print mottle during multi-color offset printing is one of the most concerned defects, and it appears not only on solid tone area but also half dot print area. There are four main causes of print mottle ranging from printing inks, dampening solution, paper, and printing press or its operation. These indicates that almost every factors associated with lithographic printing can cause print mottle. Among these variation of paper quality influences most significantly on print mottle problems in multicolor offset printing, and this indicates that paper is most often to be blamed for its product deficiency as far as print mottle problems are concerned. Furthermore, most of the print mottle problems associated with paper is observed when coated papers are printed. Uncoated papers rarely show mottling problems. This indicates that print mottle is the most serious quality problems of coated paper products. Overcoming the print mottle is becoming more difficult because the operating speeds of coating and printing machines are increasing, coating weights are decreasing, and the demands on high-quality printing are increasing. Print mottle in offset printing is caused by (a) nonuniform back trap of ink caused by a nonuniform rate of ink drying, referred as "back trap mottle, and (b) nonuniform absorption of the dampening solution. Furthermore, both forms of print mottle have some relationship to the structure of the coated layer. The surest way of eliminating ink mottling is to eliminate unevenness in the base paper. Coating solutions, often easier to put into practice, should, however, be considered. In this paper the principal factors influencing print mottle of coated papers will be discussed. Especially the importance of base paper roughness, binder migration, even consolidation of coating layers, control of the drying rate, types of binders, etc. will be described.
Statement of problem. Although a number of previous investigations have been carried out on the polymerization shrinkage-strain kinetics of provisional crown and fixed partial denture (FPD) materials, the effect of the changes of liquid monomer to powder ratio on its polymerization shrinkage-strain kinetics has not been reported. Purpose. The purpose of this study was to investigate the influence of liquid monomer to powder ratio of polymer-based provisional crown and FPD materials on the polymerization shrinkage-strain kinetics. Material and methods. Chemically activated acrylic provisional materials (Alike, Jet, Snap) were investigated. Each material was mixed with different liquid monomer to powder ratios by volume (1.0:3.0, 1.0:2.5, 1.0:2.0, 1.0:1.5, 1.0:1.0). Time dependent polymerization shrinkage- strain kinetics of all materials was measured by the bonded-disk method as a function of time at $23^{\circ}C$. Five recordings were taken for each ratio. The results were statistically analyzed using one-way ANOVA and the multiple comparison Scheffe test at the significance level of 0.05. Trends were also examined by linear regression. Results. At 5 minutes after mixing, the polymerization shrinkage-strains of all materials ranged from only 0.01% to 0.49%. At 10 minutes, the shrinkage-strain of Alike was the highest, 3.45% (liquid monomer to powder ratio=1.0:3.0). Jet and Snap were 2.69% (1.0:2.0) and 1.58% (1.0:3.0), respectively (P>0.05). Most shrinkage (94.3%-96.5%) occurred at 30 minutes after mixing for liquid monomer to powder ratio, ranging from 1.0:3.0 to 1.0:1.0. The highest polymerization shrinkage-strain values were observed for the liquid monomer to powder ratio of 1.0:3.0. At 120 minutes after mixing, the shrinkage-strain values were 4.67%, 4.18%, and 3.07% for Jet, Alike, and Snap, respectively. As the liquid monomer to powder ratio increased, the shrinkage-strain values tend to be decreased linearly (r=-0.769 for Alike, -0.717 for Jet, -0.435 for Snap, $r^2=0.592$ for Alike, 0.515 for Jet, 0.189 for Snap; P<0.05). Conclusion. The increase of the liquid monomer to powder ratio from 1.0:3.0 to 1.0:1.0 had a significant effect on the shrinkage-strain kinetics of polymer-based crown and FPD materials investigated. This increased the working time and decreased the shrinkage-strain during polymerization.
구순 구개열 신생아는 출생시부터 수유의 어려움을 비롯하여 중이염, 언어장애, 부정교합, 부적절한 악안면 성장과 이로 인한 정신적 손상등에 직면하게 된다. 이런 복합적인 문제를 갖고 있는 신생아의 전반적인 치료를 위해서는 여러 관련분야 전문가들의 포괄적인 관리가 필요하다. 특히 수유의 어려움은 유아의 영양 상태를 좌우할 수 있는 중요한 문제이므로 가장 먼저 관리하여야 할 부분이다. Obturator의 사용은 수유보조의 역할 뿐만 아니라 구강과 비강을 구분하여 중이염의 발생빈도를 감소시키고, 구개판의 성장을 촉진시키며, 정상적인 구강 안면조직의 발달을 유도할 수 있다. 소아치과의사는 구순 구개열 신생아의 정상적인 성장, 발육을 위해 출생 직후 부모에게 적절한 수유방법의 조언과 함께 obturator 를 장착해 주고, 다른 team과 긴밀한 협진을 통해 유치열기, 혼합치열기까지 지속적으로 치과적 관리를 제공하여야 한다.
본 논문은 20세기에 '상호문화적'이라는 용어를 사용하며 출현한 미국의 상호문화교육, 상호문화의사소통, 캐나다의 상호문화주의, 유럽의 상호문화교육, 상호문화철학을 그 출현 시기, 장소, 배경, 주안점, 한계 등을 기준으로 비교해보면서 이것들이 상호 영향이나 합의 하에 출현한 것인지 아니면 독자적으로 출현한 것인지를 밝혀보고자 하였다. 우리는 이 다섯 가지의 '상호문화 담론들'을 비교, 분석해 본 결과, 이 담론들이 비록 '상호문화적'이라는 용어를 모두 사용했지만 상호 영향이나 합의는 거의 없이 독자적으로 발전해 왔음을 알 수 있었다. 우리는 이것을, 20세기 국제화, 세계화에 의해서 만들어진 지구촌에서 점점 부각되고 있는 문화적 차이들을 가능한 긍정적으로 접근해 보고자 하는 인류의 공통적인 노력의 소산이라고 해석하였다. 우리는 이런 상호문화 담론이 한국 다문화 사회에도 널리 퍼지길 기대한다.
Objective: In dryland areas of China, alfalfa hay (AH) is a possible substitute for concentrate feed for beef cattle. To evaluate the potential benefits of this substitution, we studied the effect of the ratio of AH intake to total dry matter (DM) intake on average daily body-weight gain (ADG), dietary energy utilization status, and economic benefit in Gansu province. Methods: In each of two feeding trials in 2016 (trial 1 [T1], July 3 to 17; trial 2 [T2], August 15 to September 23), crossbred male Simmental calves were allocated to low AH (LA), medium AH (MA), and high AH (HA) feeding groups (n = 4 per group). The target ADG was set as 1 kg for both trials. In a one-way-layout design based on conventional feeding practices in the province, calves received diets containing the different AH amounts, with a constant ratio of corn stover:total DM and decreasing rations of concentrate feed proportional to the increase in AH. Calves in T1 received AH at 15% (T1-LA), 23% (T1-MA), or 31% (T1-HA) of their dietary DM allowances; those in T2 received 9% (T2-LA), 24% (T2-MA), or 34% (T2-HA) AH. Results: Among the T1 groups, both ADG and economic benefit were highest in T1-LA; whereas in T2, they were higher in the T2-LA and T2-MA groups than in T2-HA. Energy digestibility did not significantly differ among the groups in either trial. The dietary AH inclusion ratios of 14% in the warm season and 8% to 21% in the cool season appeared to yield optimal ADG, metabolizable energy intake, and economic benefit. Conclusion: Low-level inclusion of AH, ranging from 8% to 21%, is a practical approach for beef cattle feeding. This modified feeding regimen likely will promote increased growth performance during the fattening stage of beef steers in dryland areas of Gansu province, China.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.