• Journal of the Korean Society for Nondestructive Testing
• /
• v.36 no.1
• /
• pp.18-26
• /
• 2016

The semiconductor industry is one of the key industries of Korea, which has continued growing at a steady annual growth rate. Important technology for the semiconductor industry is high integration of devices. This is to increase the memory capacity for unit area, of which key is photolithography. The photolithography refers to a technique for printing the shadow of light lit on the mask surface on to wafer, which is the most important process in a semiconductor manufacturing process. In this study, the width and step-height of wafers patterned through this process were measured to ensure uniformity. The widths and inter-plate heights of the specimens patterned using photolithography were measured using transmissive digital holography. A transmissive digital holographic interferometer was configured, and nine arbitrary points were set on the specimens as measured points. The measurement of each point was compared with the measurements performed using a commercial device called scanning electron microscope (SEM) and Alpha Step. Transmission digital holography requires a short measurement time, which is an advantage compared to other techniques. Furthermore, it uses magnification lenses, allowing the flexibility of changing between high and low magnifications. The test results confirmed that transmissive digital holography is a useful technique for measuring patterns printed using photolithography.

• Journal of IKEEE
• /
• v.6 no.2 s.11
• /
• pp.136-145
• /
• 2002

The simulator for the analysis of the lattice temperature under the steady-state condition is developed. The heat flow equation using the Slotboom variables is discretized and the integration method of the thermal conductivity without using the numerical analysis method is presented. The simulations are executed on the $N^+P$ junction diode and BJT to verify the proposed method. The average relative error of the lattice temperature of $N^+P$ diode compared with DAVINCI is 2% when 1.4[V] forward bias is applied and the average relative error of the lattice temperature of BJT compared with MEDICI is 3% when 5.0[V] is applied to the collector contact and 0.5[V] is applied to the base contact. BANDIS using the proposed method of integration of thermal conductivity needs 3.45 times of matrix solution to solve one bias step and DAVINCI needs 5.1 times of matrix solution MEDICI needs 4.3 times of matrix solution.

• Journal of Korean Physical Therapy Science
• /
• v.8 no.2
• /
• pp.977-987
• /
• 2001

The purpose of this study was to examine the effects of sensory integration therapy (SIT) on sensory' motor development and adaptive behavior of cerebral palsy children. The design of this study was quasi experiments with a non-equivalent pre- and post-test control design. Subjects of the study were arbitrarily chosen based on predetermined selection criteria among the cerebral palsy children who were treated as out-patients at two rehabilitation hospitals one in Seoul, and the other in Kyunggi-do. The study was conducted between early April and late July in 2000. Fifteen children were in the experimental group and eleven in the control group. The allocation was done based on ease of experimental treatment. A five-step SIT program was devised from a combination of SIT programs suggested by Ayres(1985) and Finks(1989), and an author-designed SIT program for cerebral palsy children. The experimental group was subjected to 20 to 30 minutes of SIT per session. two sessions a week for ten -week period. The effects of SIT were measured with respect to 9 sub-areas that can be administered to cerebral palsy children out of a total of 17 sub-areas in the Southern California Sensory Integration Test (SCSIT) developed by Ayres (1980). In addition. the scale developed by Russell (1993) for Gross Motor Function Measure (GMFM). and Perception Motor Development Test developed by 中司利一 et al.(1987) were also applied. Adaptive behavior was analyzed using guidelines in two unpublished documents - School-Age Checklist for Occupational Therapy by the Wakefield Occupational Therapy Associates, and the OTA-Watertown Clinical Assessment by the Watertown Occupational Therapy Associates-, and an author-developed Adaptive Behavior Checklist. Collected data were statistically analyzed by SPSS PC for chi square test, Mann-Whitney test, Wilcoxon signed rank test, and paired t-test. The results were as follows: 1. In sensory development, the experimental group exhibited a score increase compared to the control group, but the difference was not statistically significant, Although the experimental group showed improvements in all. 9 sub-areas compared to the control group, only right-left discrimination exhibited statistically significant change. 2. In gross motor development, the experimental group showed improvements in score compared to the control group, but it was not statistically significant. In fine motor development, the experimental group exhibited statistically significant improvements compared to the control group. In sub-area analysis, figure synthesis showed positive change. 3. In adaptive behavior development, post-experimental adaptive behavior scores were higher compared to pre-experimental scores with statistical significance. Furthermore, sub-areas emotional behavior, perception behavior, gross-fine motor function, oral-respiration function, motor behavior, motor planning, and adaptive response exhibited higher scores after SIT. In conclusion SIT was found to be partially effective in sensory and fine motor development, effective in all adaptive behavior areas, and not effective in gross motor development. Thus, this study has shown that SIT is an effective intervention for sensory development, fine motor development, and adaptive behavior for cerebral palsy children. But, for the effectiveness of SIT on gross motor development, further studies employing longer-time experiments are recommended.

• Industry Promotion Research
• /
• v.8 no.3
• /
• pp.61-67
• /
• 2023

This study is to suggest ways to overcome the social exclusion experienced by migrants in Korean society and achieve social integration, focusing on the fact that social exclusion continues in many fields along with the increasing number of migrants. The research results are as follows. First, the legal system related to migrants must be enacted and revised. As the number of migrants increases, various legal and institutional enactments as well as reorganization of related laws are inevitable. Immigrants should be allowed to overcome social exclusion so that their cultural uniqueness and value are recognized and preserved, and they are given the same qualifications and abilities as the residents. Second, migrants' political participation must be guaranteed. When the political participation of migrants, which is currently only open to a small part, is guaranteed, Korean society can be seen as progressing one step toward a multicultural society. Third, residents and migrants must coexist. As a premise of this, it is necessary to prepare a ground where social exclusion can be overcome so that migrants can coexist. Immigrants should be able to develop a relationship of coexistence in the reality that social exclusion is progressing in each field compared to permanent residents. In conclusion, in order for the increasing number of immigrants to settle in Korean society, social integration can be achieved only when social exclusion imposed on immigrants is overcome.

• Steel and Composite Structures
• /
• v.30 no.6
• /
• pp.535-550
• /
• 2019

Prestressed concrete (PC) bridges using corrugated steel webbing have emerged as one of the most promising forms of steel-concrete composite bridge. However, their long-term behavior is not well understood, especially in the case of large-span bridges. In order to study the time-dependent performance, a large three-span PC bridge with corrugated steel webbing was compared to a similar conventional PC bridge to examine their respective time-dependent characteristics. In addition, a three-dimensional finite element method with step-by-step time integration that takes into account cantilever construction procedures was used to predict long-term behaviors such as deflection, stress distribution and prestressing loss. These predictions were based upon four well-established empirical creep prediction models. PC bridges with a corrugated steel web were observed to have a better long-term performance relative to conventional PC bridges. In particular, it is noted that the pre-cambering for PC bridges with a corrugated steel web could be smaller than that of conventional PC bridges. The ratio of side-to-mid span has great influence on the long-term deformation of PC bridges with a corrugated steel web, and it is suggested that the design value should be between 0.4 and 0.6. However, the different creep prediction models still showed a weak homogeneity, thus, the further experimental research and the development of health monitoring systems are required to further progress our understanding of the long-term behavior of PC bridges with corrugated steel webbing.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.8
• /
• pp.33-41
• /
• 2009

In this paper, we develop a construction business information portal system. Our portal system consists of two major parts including a institution portal and a public portal. The institution portal is for the people working at governmental agencies and the public one is for general users. This paper adopted Method/1 as the development methodology of the portal system and made the portal using Java-based web application framework. After the development of the portal. we tested it step by step to improve its quality and run Help-desk for the stable operation and maintenance. In the future, we will develop some additional contents required by users.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.7
• /
• pp.691-700
• /
• 2017

International sports events is one of the core products in the sports industry the scale of sports event business is steadily increasing. However, In terms of sports event management, knowledge and experience generated through sports events are ineffective and non-systematically managed. For this reason, unnecessary resources are wasted and trial and error are repeated in hosting, preparing and operating in sports event management. The purpose of this study is to develop a sports event management process and evaluate conformance. To accomplish the purpose of this study, developed the core processes of sports events in step by step and then applied and conformance evaluated of the designed process. Developed and evaluated sports events management processes are five Functional Area of registration, accommodation, transport, broadcasting, and food and beverage. Of these FA, 63 activities were selected and analyzed. The modeling was used as IDEF method, the conformity analysis was used as Fuzzy logic, analysis tool was used ProM.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.17 no.4
• /
• pp.275-287
• /
• 2024

Research on the integration of Knowledge Graphs (KGs) and Language Models (LMs) has been consistently explored over the years. However, studies focusing on the automatic generation of text using the structured knowledge from KGs have not been as widely developed. In this study, we propose a methodology for automatically generating specific domain-related research items (Related Work) at a level comparable to existing papers. This methodology involves: 1) selecting optimal prompts, 2) extracting triples through a four-step refinement process, 3) constructing a knowledge graph, and 4) automatically generating related research. The proposed approach utilizes GPT-4, one of the large language models (LLMs), and is desigend to automatically generate related research by applying the four-step refinement process. The model demonstrated performance metrics of 17.3, 14.1, and 4.2 in Triple extraction across #Supp, #Cont, and Fluency, respectively. According to the GPT-4 automatic evaluation criteria, the model's performamce improved from 88.5 points vefore refinement to 96.5 points agter refinement out of 100, indicating a significant capability to automatically generate related research at a level similar to that of existing papers.

• Journal of computational fluids engineering
• /
• v.13 no.2
• /
• pp.27-41
• /
• 2008

An unstructured hybrid mesh flow solver has been developed for the simulation of three-dimensional steady and unsteady incompressible flow fields. The incompressible Navier-Stokes equations with an artificial compressibility method were discretized by using a node-based finite-volume method. For the unsteady time-accurate computation, a dual-time stepping method was adopted to satisfy a divergence-free flow field at each physical time step. An implicit time integration method with local time stepping was implemented to accelerate the convergence in the pseudo-time sub-iteration procedure. The one-equation Spalart-Allmaras turbulence model has been adopted to solve high-Reynolds number flow fields. The flow solver was parallelized to minimize the CPU time and to overcome the computational overhead. This method has been applied to calculate steady and unsteady flow fields around submarine configurations and a 3-D infinite cylinder. Validations were made by comparing the predicted results with those of experiments or other numerical results. It was demonstrated that the present method is efficient and robust for the prediction of steady and unsteady incompressible flow fields.

• International Journal of Costume and Fashion
• /
• v.12 no.2
• /
• pp.41-52
• /
• 2012

The purpose of study is to understand of china clothing brand to have them to be competitive position in global market. Also through this study people who are in a clothing industry market from China and overseas will be able to utilize it to have competitive brand power. Analyzing of the China clothing brand with a history and process of development is done to help understand of changes through years. With the rapid development of economy in China, the textiles & clothing industry, as one of the key industries, is showing a strong growing tendency, and brand in china have been expanding oversea market. Till 2002, China has already been the world's largest supplier of textile & clothing. Nowadays, "Made in China" is going to be "Created in China", lots of Chinese clothing brands appear, and many Chinese fashion designers step onto world stage. Chinese women's clothing, men's clothing, casual clothing, sports clothing and designer's brand are developing, popular brands are also promoted through convenient e-commerce. Clothing companies are going public, acquiring overseas brands, implementing internal mergers and integration, expanding overseas market. In such a diversity era, Chinese brands not only need to be localization, but also need to confirm with the trend of international management and globalized economy.