• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.2
• /
• pp.280-285
• /
• 2021

When VNDN technology is used as a communication technology for infotainment application services of connected vehicles, it is possible to realize data-centric networking technology in which data is the subject of communication.Vehicle security attacks and hacks, performance degradation during long-distance data transmission, and frequent data loss It is possible to innovate the limitations of the current host-oriented Internet-based infotainment application service technology of connected vehicles. The data packet forwarding issue to deliver critical information data that is very sensitive to delay in the VNDN on a push-based basis to RSU (Road Side Unit), etc. is one of the issues to be solved for realizing VNDN-based application services. We comprehensively analyze existing forwarding techniques to support push-based data traffic under the environment, and compare and analyze each technique in terms of performance.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.2
• /
• pp.53-64
• /
• 2011

In this paper, we propose a channel estimation of side information method based received motion vectors for distributed video coding. The proposed decoder estimates motion vectors of side information and transmits it to the encoder. As the proposed encoder generates side information which is the same to one in the decoder with received motion vectors, accuracy of side information of the decoder is assessed and it is transmitted to decoder. The proposed decoder can also estimate accurate crossover probability with received error information. As the proposed method conducts correct belief propagation, computational complexity of the channel decoder decreases and error correction capability is significantly improved with the smaller amount of parity bits. Experimental results show that the proposed algorithm is better in rate-distortion performance and it is faster than several conventional distributed video coding methods.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.2
• /
• pp.355-363
• /
• 2011

Recently, as one of several methods to improve the performance of DVC(Distributed Video Coding) system, many research works are focusing on the iterative refinement of side information. Most of the conventional techniques are mainly based on the relationship between the reconstruction level and side information, or the vector median filtering of motion vectors, but, their performance improvements are restricted. In order to overcome the performance limit of the conventional schemes, in this paper, a side information generation scheme is designed by measuring the block-cost estimation. Then, by adaptively selecting the compensation mode using the received bit-plane information, we propose a block-adaptive iterative refinement which is efficient for non-symmetric moving objects. Computer simulations show that, by using the proposed refinement method, the performance can be improved up to 0.2 dB in rate-distortion.

• International journal of advanced smart convergence
• /
• v.4 no.2
• /
• pp.94-102
• /
• 2015

Optical camera communication (OCC) is an extension of Visible Light Communication. Different from traditional visible light communication, optical camera communications is an almost no additional cost technology by taking the advantage of build-in camera in devices. It was became a candidate for communication protocol for IoT. Camera module can be easy attached to IoT device, because it is small and flexible. Furthermore almost smartphone equip one or two camera for both back and font side with high quality and resolution. It can be utilized for receiving the data from LED or positioning. Actually, OCC combines illumination and communication. It can supply communication for special areas or environment where do not allow Radio frequency such as hospital, airplane etc. There are many concept and experiment be proposed. In this paper we proposed utilizing Android smart-phone camera for receiver and introduce new approach in modulation scheme for LED at transmitter. It also show how Manchester coding can be used encode bits while at the same time being successfully decoded by Android smart-phone camera. We introduce new data frame format for easy decoded and can be achieve high bit rate. This format can be easy to adapt to performance limit of Android operator or embedded system.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.3
• /
• pp.327-332
• /
• 2015

Educational robot was introduced as an effective educational tool is to foster scientific creativity and learn the basic principles of science are applied to change the configuration of the educational after-school learning kits for science education. SMEs as a tool to foster scientific creativity center and a variety of educational robot technology and the wide range of games for students and robotic technology development, existing e-Learning by downloading mp3 music or learning content for the robot, such as the provision of specialized content Although the technology is still being developed to take advantage of the professional community formation is insufficient side. Currently, one-point linkage drag Smart Touch control dynamic motor development does not need this motor development is possible for users to easily.

• Journal of the Semiconductor & Display Technology
• /
• v.12 no.2
• /
• pp.13-17
• /
• 2013

In lighting system where several large-area organic light-emitting diode (OLED) lighting panels are involved, panel aging may appear differently from each other, resulting in a falling-off in lighting quality. To achieve uniform light output across large-area OLED lighting panels, we have employed an optical feedback circuit. Light output from each OLED panel is monitored by the optical feedback circuit that consists of a photodiode, I-V converter, 10-bit analogdigital converter (ADC), and comparator. A photodiode generates current by detecting OLED light from one side of the glass substrate (i.e., edge emission). Namely, the target luminance from the emission area (bottom emission) of OLED panels is monitored by current generated from the photodiode mounted on a glass edge. To this end, we need to establish a mapping table between the ADC value and the luminance of bottom emission. The reference ADC value corresponds to the target luminance of OLED panels. If the ADC value is lower or higher than the reference one (i.e., when the luminance of OLED panel is lower or higher than its target luminance), a micro controller unit (MCU) adjusts the pulse width modulation (PWM) used for the control of the power supplied to OLED panels in such a way that the ADC value obtained from optical feedback is the same as the reference one. As such, the target luminance of each individual OLED panel is unchanged. With the optical feedback circuit included in the lighting system, we have observed only 2% difference in relative intensity of neighboring OLED panels.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.05a
• /
• pp.393-396
• /
• 2007

Recently one level higher intelligent switching board than established one by the application of intelligent building and digital system are being constructed. Therefore facility's high efficiency, high degree satisfaction, miniaturaization, standardization through application of communication technology and monitoring and controlling by computer system utilized by web-basis power control system and electric IT are practiced. Especially network must be constructed through unified IBS server that monitors every educational institute's switching boards in real time control system. And I intend to create methods to save energy and raise electricity quality by power demand prediction and remote-controled management and operation. In this thesis I intend to suggest measures of forming unified system through researching educational institute's ways of constructing switching board and status analysis and overcoming technical difficulties in user's side and saving and maintenance expense.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.346-349
• /
• 2004

The teleoperation system applies all of the industrial fields due to the development of the network infrastructure. It is one of the indispensable elements for controlling the robot at a remote sight and monitoring the limit or unknown environment. The common teleoperation robot system is what has the visual module to supply the network system and realistic UI to the existed robot system. Therefore, remarked that the fusion between modules and transmission of visual data the remarked the important element to improve the robot application in the various environments. Delay of development time by robot platform and noneffective communication among developers are also problem to approach. In this paper we propose the independent teleoperation system. The main application language is JAVA in this system, which is applied JAVA API like JNI and JMF to construct the effective teleoperation system. The system has the both side communication system between sever and client as a basic structure. The visual data that is attached the robot at a remote sight is captured by JMF API and then is transmitted to the web browser called client by RTR protocol. JNI is used to connect between JAVA and the lower part application (sensor fusion, motion control.) of the robot programmed by various Native languages. The proposed system is the application that can perform the elements, for instance transmission of visual data, the fusion of various native application modules and the effective network communication, with any platform.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.8
• /
• pp.1187-1194
• /
• 2017

After North American wide area black out on August 14, 2003, various studies have been conducted to find out the reason of the disaster. One of main reasons was misoperation of generator protection system. Since then, protective coordination between generator protection system and excitation system controls has been hot issue among electrical engineers. Among various generator protection relays, in this paper, we focused on generator overvoltage and overexcitation relay, which protect the over-flux condition of the generator. Thus, at first, we modeled the generator overvoltage, overexcitation relay and detailed power system including excitation system, governor and etc., based on actual field data. And then, we reviewed the protective coordination of generator overvoltage and overexcitation relay using electromagnetic transient program. In addition, we discussed the protective coordination method for redundant protection relays in both automatic voltage regulator and generator side.

• International Journal of Internet, Broadcasting and Communication
• /
• v.7 no.2
• /
• pp.65-72
• /
• 2015

Although the development of digital technology and network has brought great convenience in modern lives, amongst the aggravated complexity in the contemporary society, modern minds who have failed to create genuine relationships undergo a sense of alienation and solitude that may appear as a type of social pathology called cellular-phone addiction. Also, while the emergence of the information age seemingly brings about benefits including diverse acquisition regarding knowledge and broader communication, underneath exists side effects involving leakage of private information. Especially, being excessively addicted to relationship network may induce one to become insensitive towards leakage of private information without recognizing, and thereby instigating yet another social problem. Media art is very practical in terms of suggesting a critical perspective concerning social phenomena and elevating them into a work of art by rendering them artistically. Particularly, when social problems of the modern days are expressed through digital technology, media art provides the audience with a foundation that will enable them to sympathize without hostility. This dissertation calls attention to the contemporary problems regarding cellular-phone addiction and possible hazards of information leakage based on media art, while at the same time proposing the production process of a media art work that attempts to raise awareness and sympathy on such social issues.