• Journal of Korean Society of Transportation
• /
• v.22 no.7 s.78
• /
• pp.119-129
• /
• 2004

This paper is designed to report the results of development and validation procedures in relation to the Freeway Incident Management System (FIMS) prototype development as part of Intelligent Transportation Systems Research and Development program. The central core of the FIMS is an integration of the component parts and the modular, but the integrated system for freeway management. The whole approach has been component-orientated, with a secondary emphasis being placed on the traffic characteristics at the sites. The first action taken during the development process was the selection of the required data for each components within the existing infrastructure of Korean freeway system. After through review and analysis of vehicle detection data, the pilot site led to the utilization of different technologies in relation to the specific needs and character of the implementation. This meant that the existing system was tested in a different configuration at different sections of freeway, thereby increasing the validity and scope of the overall findings. The incident detection module has been performed according to predefined system validation specifications. The system validation specifications have identified two component data collection and analysis patterns which were outlined in the validation specifications; the on-line and off-line testing procedural frameworks. The off-line testing was achieved using asynchronous analysis, commonly in conjunction with simulation of device input data to take full advantage of the opportunity to test and calibrate the incident detection algorithms focused on APID, DES, DELOS and McMaster. The simulation was done with the use of synchronous analysis, thereby providing a means for testing the incident detection module.

• Restorative Dentistry and Endodontics
• /
• v.34 no.4
• /
• pp.350-355
• /
• 2009

Bond strength depends on characteristics of bonding surface and restorative technique. The majority of studies dealing with dentin bond strength were carried out on flat bonding surface, therefore, difference of bond strength between axial wall and pulpal wall is not clear yet. This study evaluated bonding difference between cavity walls in class I composite resin restoration with different filling techniques. Twenty extracted caries-free human third molars were used. Cavities were prepared in 6 ${\times}$4 ${\times}$3 mm box-type and divided into four groups according to filling technique and bonding surface: Group I; bulk filling - pulpal wall, Group II; bulk filling - axial wall, Group III; incremental filling - pulpal wall, Group IV; incremental filling - axial wall. Cavities were filled with Filtek $Z250^{(R)}$(3M/ESPE., USA) and Clearfill SE $bond^{(R)}$(Kuraray, Japan). After 24 hour-storage in $37^{\circ}C$water, the resin bonded teeth were sectioned bucco-lingualy at the center of cavity. Specimens were vertically sectioned into 1.0 ${\times}$1.0 mm thick serial sticks perpendicular to the bond surface using a low-speed diamond saw (Accutom 50, Struers, Copenhagen, Denmark) under water cooling. The trimmed specimens were then attached to the testing device and in turn, was placed in a universal testing machine (EZ test, Shimadzu Co., Kyoto, Japan) for micro-tensile testing at a cross-head speed of 1 mm/min. The results obtained were statistically analyzed using 2-way ANOVA and t-test at a significance level of 95%. The results were as follows: 1. There was no significant difference between bulk filling and incremental filling. 2. There was no significant difference between pulpal wall and axial wall, either. Within the limit of this study, it was concluded that microtensile bond strength was not affected by the filling technique and the site of cavity walls.

• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.4
• /
• pp.405-420
• /
• 2003

Purpose : The purpose of this study was to compare the fracture resistance of the IPS Empress ceramic crown with 1.0mm width rounded shoulder, which is usually recommended in all ceramic crown. and 0.5mm width chamfer finish lines on the maxillary central incisor. Material and method : After 15 metal dies were made for each group, the IPS Empress all ceramic crowns were fabricated and cemented with resin cement(Bistite resin cement, Tokuyama Soda Co. LTD., Japan) on the metal die. The cemented crowns were mounted on the positioning jig and the universal testing machine(Zwick Z020, Zwick Co. Germany)was used to measure the fracture strength with loading on the incisal edge. And also, three-dimensional finite element stress analysis was used to measure the stress distribution with the various types of the finish lines(1.0mm width rounded shoulder, 0.5mm width chamfer), the loading site(incisal edge, incisal $\frac{1}{3}$) and the type of loading(concentration loading, distribution loading). Results and conclusion : 1. In the fracture resistance experiment according to the finish line, the mean fracture strength of rounded shoulder(876N) and the mean fracture strength of chamfer(882N) did not skew any significant difference between each other(p>0.05). 2. The stress distribution of all ceramic crown in three dimensional finite element analysis showed concentration aspect at loading point and cervical area or labial surface. 3. In metal die, there were no differences in stress distribution between finish lines, but in natural teeth model, chamfer finish line showed higher stress than rounded shoulder finish line. 4. When force was loaded on the incisal edge the stress was concentrated on the incisal edge and the cervical area of labial surface. When force was loaded on the incisal $\frac{1}{3}$, the stress concentrated on the cervical area of labial surface and the cingulum area. 5. Generally, natural teeth model showed higher and various stress than the metal die.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.6
• /
• pp.69-77
• /
• 2000

In this paper, the effects of the positions of the potential and current probes on the measurements of the ground resistance and potential gradients with the fall-of-potential method are described and the testing techniques to minimize the measuring errors are proposed. The fall-of-potential method is theoretically based on the potential and current measuring principle and the measuring error is primarily caused by the position and ground resistance of the measuring probes. The ground resistance is calculated by applying the 61.8% and rule in the fall-of-potential method, and then the potential probe is located on the straight line between the grounding electrode to be measured and the current probe. However, sometimes the grounding electrode to be measured and the measuring probes in on-site test might not be arranged on the straight line with adequate distance because there are building, road block, construction and other establishments. Provided that the grounding electrode to be measured and the measuring probes ar out of position on the straight line or have inadequate distance, the measurement of the ground resistance classically falls into an error and the measured ground resistance should be corrected. Measurements were focused on the grounding electrode system made by the ground rods of 2.4m long. It was found that the suitable separation between the grounding electrode to be measured and the current probe is more than 5 times of the length of the grounding electrode to be measured.

• The Journal of KAIRB
• /
• v.1 no.2
• /
• pp.30-42
• /
• 2019

In pharmaceutical clinical trials as human material research, the collection, use, storage and provision of human materials must be in accordance with the criteria stipulated in 「Bioethics and Safety Act」, except in the case that some criteria about it is in the law related to clinical trials such as 「Pharmaceutical Affairs Act」 and 「Enforcement Rule on Safety of Drugs, etc.」 so these take precedence over. Under 「Bioethics and Safety Act」, the core aspect of the legal standard for obtaining informed consent is the use of statutory form . The use of statutory form ensure that both those who obtain informed consent and those who give it can know the contents contained this form as well as recognize its importance. Thus, the person who has the right to informed consent can sign the statutory form after correct understanding of the contents. In reality, however, some researchers and IRB members determine that only the main informed consent form is to be used because most of contents on statutory from are included in the main informed consent form. Some other researchers and IRB members judge that the use of statutory form is not needed if human materials may only be used for laboratory testing and the rest will not be stored and provided for future use. Most of these determination and judgement is based on the interpretation of the Korea National Institute for Bioethics Policy(hereafter, KoNIBP) on IRB Information Portal Site. But, it is questionable whether the KoNIBP's interpretation is legally valid and the KoNIBP is the legal entity having authority to interpret existing statute. In some cased not only using the main informed consent form including enough information about the collection, use, storage and provision of human materials but also collecting necessary minimum human materials, and discarding the rest, unusing the statutory form may not cause the problem to respect and protect the research participant's rights. Therefore, the provision stipulating the criteria about the use of statutory form as the legal standard of obtaining informed consent that applies all human material research without exception should review to revise. At least, straighten out the confusion surrounding whether or not the statutory form is to be used, before the revision of related provision, considering the logical opinions of some researchers and IRB Members, the Ministry of Health and Welfare as the legal entity having authority to interpret existing statute should represent its opinion about permission of the acceptable exceptions.

• Journal of Distribution Science
• /
• v.13 no.1
• /
• pp.57-70
• /
• 2015

Purpose - Open source software has high utilization in most of the server market. The utilization of open source software is a global trend. Particularly, Internet infrastructure and platform software open source software development has increased rapidly. Since 2003, the Korean government has published open source software promotion policies and a supply promotion policy. The dynamism of the open source software market, the lack of relevant expertise, and the market transformation due to reasons such as changes in the relevant technology occur slowly in relation to adoption. Therefore, this study proposes an assessment model of services provided in an open source software service company. In this study, the service level of open source software companies is classified into an enterprise-level assessment area, the service level assessment area, and service area. The assessment model is developed from an on-site driven evaluation index and proposed evaluation framework; the evaluation procedures and evaluation methods are used to achieve the research objective, involving an impartial evaluation model implemented after pilot testing and validation. Research Design, data, and methodology - This study adopted an iteration development model to accommodate various requirements, and presented and validated the assessment model to address the situation of the open source software service company. Phase 1 - Theoretical background and literature review Phase 2 - Research on an evaluation index based on the open source software service company Phase 3 - Index improvement through expert validation Phase 4 - Finalizing an evaluation model reflecting additional requirements Based on the open source software adoption case study and latest technology trends, we developed an open source software service concept definition and classification of public service activities for open source software service companies. We also presented open source software service company service level measures by developing a service level factor analysis assessment. The Behavior-Structure-Evolution Evaluation Model (BSEM) proposed in this study consisted of a rating methodology for calculating the level that can be granted through the assessment and evaluation of an enterprise-level data model. An open source software service company's service comprises the service area and service domain, while the technology acceptance model comprises the service area, technical domain, technical sub-domain, and open source software name. Finally, the evaluation index comprises the evaluation group, category, and items. Results - Utilization of an open source software service level evaluation model For the development of an open source software service level evaluation model, common service providers need to standardize the quality of the service, so that surveys and expert workshops performed in open source software service companies can establish the evaluation criteria according to their qualitative differences. Conclusion - Based on this evaluation model's systematic evaluation process and monitoring, an open source software service adoption company can acquire reliable information for open source software adoption. Inducing the growth of open source software service companies will facilitate the development of the open source software industry.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.675-684
• /
• 2020

To prevent safety accidents caused by aging pipe infrastructure and to maintain water quality, construction projects for water and sewage pipes are actively conducted across Korea. This study analyzed the criteria situations, site survey details, and regulation revisions related to the calculation of construction cost standards for pipe laying and joining work. The analysis showed that the major causes for revision are the unclear construction scope, limitations in implementing some pipe materials due to installation facility types, workforce focused on ordinary labor, limitations of manual laying work, and the lack of tool hire cost and machine expense-calculation criteria. Field studies were conducted to categorize the pipes according to their features, in addition to identifying the use of lifting heavy equipment and light equipment. In addition, excavation and testing work conducted in connection to pipe laying, as well as the use of skilled labor, were investigated. The current study clarified the work scope through new common items, provides an organization based on the pipe material, adjusted the workforce ratio to focus more on skilled labor, and developed grounds for calculating machine expenses. These revisions were estimated to save approximately 1.28% of the construction costs in each project according to an analysis of the construction cost impact study. truction costs in each project, according to an analysis of construction cost impact study.

• Journal of fish pathology
• /
• v.34 no.1
• /
• pp.81-98
• /
• 2021

As Korea declared that the entire country is free from ISA (Infectious salmon anaemia) based on the OIE aquatic code in 2019, it is necessary to improve the import quarantine system that meets the level of ISA management in Korea. Currently, Korea imports Atlantic salmon and rainbow trout from countries which have history of ISA outbreak such as Norway and the United States, so there is a constant possibility that trade with these countries will bring ISAV (Infectious salmon anaemia virus) into Korea. Therefore, some amendments to the Aquatic Life Diseases Control Act (ALDCA) are needed to prevent the entry of ISAV into the Korea through international trade. The amendment to the ALDCA should contain a list of countries, zones or compartments that the Korean competent authority has allowed or banned imports of ISA-susceptible fish. In addition, the subordinate statutes or administrative rules of the ALDCA need to be revised so that on-site inspections/audit can be conducted for the evaluation of the ISA management system in exporting countries. After the revision of the subordinate statutes or administrative rules, it is necessary to strengthen the present import conditions in line with those that meet the level of ISA management in Korea. As for the strengthened import conditions, the competent authorities of exporting countries must export only salmonid fish produced in zones or compartments declared freedom of ISA to Korea, and must prove through lab-testing that ISAV should not be detected in the fish exporting to Korea. In addition, official veterinarians/fish health professionals of the exporting country should check the health status of the fish within 72 hours prior to export. Also, competent authorities of the exporting countries must attest that fish storage containers and water, ice and other equipment used for transportation should be cleaned and disinfected to avoid contamination with pathogens, including ISA. Therefore, the proposed measures presented here will further improve the current import condition for salmonid fish and assist decision-making on strategies to reduce the risk of ISA introduction into Korea. Also, it is expected to contribute to maintain the status of ISA-free country.

• Tunnel and Underground Space
• /
• v.32 no.6
• /
• pp.502-517
• /
• 2022

As the use of TBM increases, research has recently increased to to analyze TBM data with machine learning techniques to predict the exchange cycle of disc cutters, and predict the advance rate of TBM. In this study, a regression prediction of disc cutte wear of slurry shield TBM site was made by combining machine learning based on the machine data and the geotechnical data obtained during the excavation. The data were divided into 7:3 for training and testing the prediction of disc cutter wear, and the hyper-parameters are optimized by cross-validated grid-search over a parameter grid. As a result, gradient boosting based on the ensemble model showed good performance with a determination coefficient of 0.852 and a root-mean-square-error of 3.111 and especially excellent results in fit times along with learning performance. Based on the results, it is judged that the suitability of the prediction model using data including mechanical data and geotechnical information is high. In addition, research is needed to increase the diversity of ground conditions and the amount of disc cutter data.

• Journal of the Korean Geotechnical Society
• /
• v.39 no.11
• /
• pp.85-95
• /
• 2023

This study implemented intelligent compaction technology at the construction site of the AY Highway in Gyeonggi Province, with a focus on obtaining the representative intelligent compaction value, CMV. The target CMV for quality control was established through trial construction, and the validation of the compaction quality control process based on intelligent compaction was conducted. The optimal approach for determining the target CMV was confirmed to be through linear regression of the average CMV measured within a 5-m radius from the plate load testing location. Upon assessing compaction quality against the target CMV, it was observed that the quality criteria outlined in the domestic intelligent compaction standard were met. However, the criteria outlined in Austria and the United States were not satisfied. Notably, indicators related to the variability of compaction quality did not meet the specified criteria, suggesting a stringent standard compared to the observed variability of CMV, ranging from 17% to 55%. Consequently, it is recommended to conduct additional field tests to further validate the compaction quality control process based on intelligent compaction. This will aid in confirming and enhancing the appropriateness of the regulations stipulated in each standard.