• 제목/요약/키워드: on-site testing

검색결과 452건 처리시간 0.024초

비즈니스용 웹 사이트 개발에서의 실시간 발성사고법 사용성 테스트 사례 연구 (Research on Usability Test for Business Web Site Development using Concurrent Think Aloud Protocol)

  • 김재훈;신재민;김정환;임석종
    • 한국콘텐츠학회논문지
    • /
    • 제18권5호
    • /
    • pp.1-10
    • /
    • 2018
  • 본 연구는 비즈니스용 웹 사이트 개발에 있어 비용효과적인 사용성 테스트 모델을 제시할 목적으로 수행되었다. 본 연구에서는 실시간 발성사고법(Concurrent Think Aloud), 성능 측정, 코칭 방법, 원격 테스트 방법을 혼합한 사용성 테스트 모델을 제시하였다. 테스트 대상은 연구진이 운영하는 전자정보 공동구매 컨소시엄 웹 사이트로 하였다. 테스트 참가자는 실제 사용자로 하였으며 업무 역할과 숙련도별로 차이를 두어 구성하였다. 사용성 테스트 분석 결과를 반영하여 시스템을 개선하였고, 동일한 태스크를 수행하여 소요시간과 마우스 궤적 복잡도를 비교한 결과 모든 참가자의 사용성이 개선된 것을 확인하였다. 본 연구에서 제시한 사용성 테스트 모델을 활용하여 비즈니스용 웹 사이트를 비용 효과적으로 평가하여 분석하는데 도움이 될 것으로 기대한다. 웹 사이트들은 목적별, 분야별로 특성이 있으므로 향후에는 특성화된 사용성 테스트 모델 연구가 필요하다고 본다.

암반공학-우리나라에서의 과제와 연구주제 (Rock Mechanics-Major Projects and Research Topics in Korea)

  • 정소걸
    • 자원환경지질
    • /
    • 제39권4호
    • /
    • pp.451-471
    • /
    • 2006
  • 암반공학 관련 국책과제로부터 암반공학 분야의 주요 연구과제와 연구 내용을 분석해 본 견과를 요약하면 다음과 같다. $\cdot$ 암반공학은 암석 혹은 현지 암반의 변형, 파괴 그리고 변위에 대한 것을 주 연구 내용으로 하고 있으며, 지질학적인 기초를 요구하는 학문이다. 암반내에 존재하는 불연속면은 지하공간을 포함하는 암반의 거동을 결정하는 가장 중요한 변수이다. $\cdot$ 현장조사와 시험의 기본적인 목적은 암반의 강도 정수의 결정과 현지 암반의 응력 상태를 규명하는데 있으며, 실험실 시험 혹은 현장 시험은 반드시 대상 암반의 역학적 거동을 대표할 수 있도록 수행되어야 한다. $\cdot$ 수치해석의 견과는 그 결과가 비록 정량화되었더라도 정성적인 기준에 의해 평가되는 것이 타당하다. 암반의 변위 거동을 면밀하게 계측하여야 NATM의 기본 개념에 맞는 올바른 터널과 지하공간의 설계와 시공이 가능하며, 암반 사면의 안정성을 분석하는데 있어 역해석에 의해 산정된 강도 정수가 전제되어야 할 것으로 평가된다.

터널시공 시 이산화탄소(CO2)를 이용한 알칼리성 폐수의 중화처리 현장적용 연구 (A Study on the Field Application of Alkaline Tunnel Wastewater to Neutralization Using CO2)

  • 박영진;이호철
    • 한국지반공학회논문집
    • /
    • 제36권8호
    • /
    • pp.27-34
    • /
    • 2020
  • 터널시공 현장에서는 콘크리트와 숏크리트 및 각종 그라우팅 공법의 사용으로 다량의 알칼리성 폐수가 발생되고 있으며 하천오염을 방지하기 위해 중성화 처리를 해서 방류해야 한다. 현재는 이를 황산과 같은 강산으로 중화 처리하고 있으나 취급상의 위험이 내재 되어있다. 그 대안으로 이산화탄소(CO2) 사용이 부각되었고 다양한 실내실험 연구가 진행되어 그 가능성이 입증되고 있다. 하지만 아직 CO2의 현장 적용연구가 절대 부족하고 특히 건설현장에서는 실내 실험 결과와는 다른 특성을 보이고 있기 때문에 현장 적용이 어려운 실정이다. 이에 본 연구에서는 현장 실험을 통하여 실제 현장 적용 가능성을 검증하고자 한다.

VERIFICATION OF ELECTROMAGNETIC EFFECTS FROM WIRELESS DEVICES IN OPERATING NUCLEAR POWER PLANTS

  • YE, SONG-HAE;KIM, YOUNG-SIK;LYOU, HO-SUN;KIM, MIN-SUK;LYOU, JOON
    • Nuclear Engineering and Technology
    • /
    • 제47권6호
    • /
    • pp.729-737
    • /
    • 2015
  • Wireless communication technologies, especially smartphones, have become increasingly common. Wireless technology is widely used in general industry and this trend is also expected to grow with the development of wireless technology. However, wireless technology is not currently applied in any domestic operating nuclear power plants (NPPs) because of the highest priority of the safety policy. Wireless technology is required in operating NPPs, however, in order to improve the emergency responses and work efficiency of the operators and maintenance personnel during its operation. The wired telephone network in domestic NPPs can be simply connected to a wireless local area network to use wireless devices. This design change can improve the ability of the operators and personnel to respond to an emergency situation by using important equipment for a safe shutdown. IEEE 802.11 smartphones (Wi-Fi standard), Internet Protocol (IP) phones, personal digital assistant (PDA) for field work, notebooks used with web cameras, and remote site monitoring tablet PCs for on-site testing may be considered as wireless devices that can be used in domestic operating NPPs. Despite its advantages, wireless technology has only been used during the overhaul period in Korean NPPs due to the electromagnetic influence of sensitive equipment and cyber security problems. This paper presents the electromagnetic verification results from major sensitive equipment after using wireless devices in domestic operating NPPs. It also provides a solution for electromagnetic interference/radio frequency interference (EMI/RFI) from portable and fixed wireless devices with a Wi-Fi communication environment within domestic NPPs.

Evaluation of mode-shape linearization for HFBB analysis of real tall buildings

  • Tse, K.T.;Yu, X.J.;Hitchcock, P.A.
    • Wind and Structures
    • /
    • 제18권4호
    • /
    • pp.423-441
    • /
    • 2014
  • The high frequency base balance (HFBB) technique is a convenient and relatively fast wind tunnel testing technique for predicting wind-induced forces for tall building design. While modern tall building design has seen a number architecturally remarkable buildings constructed recently, the characteristics of those buildings are significantly different to those that were common when the HFBB technique was originally developed. In particular, the prediction of generalized forces for buildings with 3-dimensional mode shapes has a number of inherent uncertainties and challenges that need to be overcome to accurately predict building loads and responses. As an alternative to the more conventional application of general mode shape correction factors, an analysis methodology, referred to as the linear-mode-shape (LMS) method, has been recently developed to allow better estimates of the generalized forces by establishing a new set of centers at which the translational mode shapes are linear. The LMS method was initially evaluated and compared with the methods using mode shape correction factors for a rectangular building, which was wind tunnel tested in isolation in an open terrain for five incident wind angles at $22.5^{\circ}$ increments from $0^{\circ}$ to $90^{\circ}$. The results demonstrated that the LMS method provides more accurate predictions of the wind-induced loads and building responses than the application of mode shape correction factors. The LMS method was subsequently applied to a tall building project in Hong Kong. The building considered in the current study is located in a heavily developed business district and surrounded by tall buildings and mixed terrain. The HFBB results validated the versatility of the LMS method for the structural design of an actual tall building subjected to the varied wind characteristics caused by the surroundings. In comparison, the application of mode shape correction factors in the HFBB analysis did not directly take into account the influence of the site specific characteristics on the actual wind loads, hence their estimates of the building responses have a higher variability.

우주 행성 탐사 로버 등판 시험장 설계 (Space Planet Exploration Rover Climbing Test Site Design)

  • 유병현
    • 한국지반신소재학회논문집
    • /
    • 제22권4호
    • /
    • pp.1-8
    • /
    • 2023
  • 우주 탐사는 인류의 과학적 노력 중 가장 선두에 있으며, 행성 탐사 로버는 행성 지표면을 연구하는 핵심 장비이다. 행성 로버의 성능은 가파른 경사와 다양한 행성 지형을 탐지하고 통과하는 데 큰 영향을 미치며 특히 달과 같은 행성에서는 급격한 경사와 연약한 지면을 안전하게 등반하고 이동할 수 있는 능력이 필수적으로 요구된다. 이 논문에서는 우주 행성 탐사 로버가 직면하는 가파른 지형과 연약한 지면을 모사하는 등반 시험장의 설계와 검증 방법을 종합적으로 소개한다. 먼저 달의 크레이터 지역의 지형 특성과 탐사의 중요성을 간략히 설명하고, 기존 등반 시험장의 개발 사례를 살펴보며, 현재 한국건설기술연구원에서 운영 중인 지반열진공챔버 내에 설치 예정인 등반 시험장의 설계 과정을 설명한다. 본 연구에서 제안하는 등반 시험장이 개발되면 실제 달의 환경과 유사한 고진공, 극한 온도 조건에서 로버의 이동과 탐사 능력을 정밀하게 평가할 수 있을 것으로 기대된다.

현장 설치 조건을 고려한 발전설비 전기 캐비닛 정착부 앵커의 구조성능 평가 (Structural Performance Evaluation of Anchors for Power Equipment Electrical Cabinets Considering On-Site Installation Conditions)

  • 이상문;정우영
    • 대한토목학회논문집
    • /
    • 제43권6호
    • /
    • pp.709-719
    • /
    • 2023
  • 일반적으로 발전소 내 제어를 담당하는 대부분의 전기 설비는 자립식 캐비닛으로, 후설치 앵커를 사용하여 슬래브에 고정하는 정착 방식이 주로 사용된다. 정착부 앵커의 경우 외력이 작용될 시 모멘트 하중 등에 의한 전도의 위험성에 노출되지만 현행 앵커에 대한 성능 검토는 1축 재료 시험으로만 평가되고 있다. 따라서 본 연구는 현장 설치 조건이 반영된 후설치 앵커의 정적 성능 실험을 통하여 재료 시험과의 성능을 비교하고 앵커의 거동 특성을 분석하는 것이 주목적이다. 실제 캐비닛을 이용하여 실험을 진행하는 것이 타당하지만 경제적, 공간적 제약으로 수행하기에 어려움이 있어 강재 기둥과 받침으로 구성된 실험체로 대체하여 수행하였다. 결과적으로 현장 설치 조건을 반영한 앵커의 인발 성능이 재료 시험 대비 약 10 % 높게 측정되었으며, 앵커의 하중 감소 경향 및 최대 성능이 발현되는 시점도 상이한 것으로 나타났다. 한편, 실험적 연구의 신뢰성을 검증하기 위하여 3D FEM 해석을 수행하였으며, 이를 통해 향후 진동대를 이용한 전기 캐비닛의 구조 성능 평가 시 후설치 앵커에 전달되는 예측 가능한 하중 정보를 제공하고자 한다.

일반 가설앵커의 문제점과 개선방향 (Ground Anchor Testing on Temporary Excavations)

  • 김성규;김낙경;김정렬
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2003년도 봄 학술발표회 논문집
    • /
    • pp.545-552
    • /
    • 2003
  • For temporary excavation support in a congested urban area, the strand of ground anchor should be removed to get permission of the private land to install anchors. But the strand doesn't need to be removed in the outside city area after use. So the anchor body, tension anchor, is fabricated in-situ. The unbonded length of This anchor has several strands, which wrap only one sheath. When the anchor body is carried into job-site or installed in the bore hole, the sheath is torn easily because it is a very week material. So the grout permeate into the torn sheath. Because of that, the load doesn't transfer to the bond length of ground anchors. It may indicate that load is being transferred along the unbonded length and thus within the potential slip surface assumed for overall stability of the anchored system. The load tests were performed on seven low-pressure grouted anchors installed in weathered soil to verify its problems. Four anchors(Type A) have the unbonded length, which consist of five strands and a week sheath and three anchors(Type B) have strands, which is covered by plastic sheath filled with grease, in the unbonded length. Both anchors are compared with load tests results.

  • PDF

근린주거형태와 오픈스페이스 이용행태에 관한 연구 -광주직할시 7 개 A.P.T단지를 중심으로- (A Study on Neighbourhood Physical Form and Use of Public Open Space -Case Study : Seven Apartment Sites in Kwang Ju direct city-)

  • 김농오
    • 한국조경학회지
    • /
    • 제19권3호
    • /
    • pp.72-86
    • /
    • 1991
  • In the study I analyzed the relationship between the characteristics of the user's residential environment and his or her use of openspace. I find out that there are little correlationship between building form and use factors. Also, there are no relationship between persons per room and use factors. Only the physical distance and the location of the building site is correlated with the use factor. In testing the hypotheses, I discovered very little to support the "physical deterministic" notion. I generally was not able to explain the behavior of open space users on the basis of the physical parameters selected to describe the user's residential environment. This, I believe, indicates that there probably are many other variables that play a more important role than those pertaining to the density and form of the residential environment. It is necessary to find out more variables affecting the use of openspace in the neighbourhoods, such as the charecteristics of user group. Also, it is necessary to apply the study to the other sites or the other cities in Korea to compare with the results.

  • PDF

Diagnosis and Evaluation of Conservation State of Mural Paintings in Payathonzu Temple on Bagan Heritage Site in Myanmar

  • Lee, Hwa Soo;Kim, Seol Hui;Han, Kyeong Soon
    • 보존과학회지
    • /
    • 제35권5호
    • /
    • pp.494-507
    • /
    • 2019
  • A diagnostic investigation of the conservation state of damaged murals of the Payathonzu temple mainly indicated delamination, exfoliation, and contamination of the coloring layer; cracks and damage to the wall; and separation from gaps. In particular, vulnerabilities resulting from cracks in the wall and damage from gaps demand swift reinforcement measures. Ultrasonic testing uncovered damage caused by gaps between the base layer and plastered wall in several areas of the mural, vulnerable parts in the wall around the cracks, and considerable degradation of the physical properties where cracks and gaps were severe. Moisture measurements identified vast disparities in moisture depending on location even within a single area of the mural, and it was clear that these disparities were the result of environmental conditions such as humidity. Damage to the murals in monument 477 was the most severe, and a diagnostic of the physical properties uncovered severe physical damage to the upper part of the mural as well as to the corridor ceiling, thus presenting the need for conservation treatment utilizing scientific diagnosis as well as objective data.