• Journal of Korean Society for Atmospheric Environment
• /
• v.33 no.3
• /
• pp.191-204
• /
• 2017

Concerns on the air pollution problem caused by ambient fine particles have become a big social issue in Korea. Important factors that should be addressed to develop effective and efficient air quality management policy, especially, against fine particles are discussed and research and policy directions to address these factors are suggested. It is suggested that two factors are in high priority; one is scientific understanding of the major formation mechanisms of fine particles and the other is the process of policy decision and implementation. For the scientific understanding, smog chamber measurement, intensive field study, and chemical transport model development that can simulate the characteristics of Northeast Asia are considered to be important. For the policy directions, priority setting of the proposed policies and development and implement of effective communication sytem are considered to be important.

• Journal of Korean Society for Atmospheric Environment
• /
• v.27 no.5
• /
• pp.558-568
• /
• 2011

Hazardous volatile organic compounds (HVOCs) have been increasingly getting concern in urban air chemistry due to photochemical smog as well as its toxicity or potential hazards. In this study, we investigated their concentrations and the properties in tunnel, urban roadside and residential area. As a result, among 36HVOCs measured in this study, BTEX (benzene, toluene, ethylbenzene, xylene) and dichlorodifluoromethane, 1,2,4-trimethylbenzene, trichlorofluoromethane were detected above the concentration of $1{\mu}g/m^3$ in every sampling site and the most abundant compound was toluene. The other compounds were detected at trace level or below the detection limit. In addition, we found that three CFCs (chlorofluorocarbons), such as CFC-12, CFC-11, CFC-113, were persistently detected because of the emission in the past. Toluene to benzene ratio (T/B) at tunnel and roadside were calculated to be 4.3~5.3 and at residential area 15.4, suggesting that the residential area had several emission sources other than car exhaust. The ratio of X/E (m,p-xylene to ethylbenzene) ratio was calculated to be 1.8~2.1 at tunnel, 1.7 at roadside and 1.2 at residential area, which means this ratio reflected well the relative photochemical reactivity between these compounds. Good correlation between m,p-xylene and ethylbenzene ($r^2$ > 0.85) were shown in every study sites. This indicated that correlation between $C_2$-alkylbenzenes were not severely affected by 3-way catalytic converter. In this study, it was demonstrated that the concentration of benzene was very low, compared with national air quality standard (annual average of $5{\mu}g/m^3$). Its concentration were $2.52{\mu}g/m^3$ in roadside and $1.34{\mu}g/m^3$ in residential area. We thought this was the result of persistent policy implementation including the reduction of benzene content in gasoline enforced on January 1, 2009.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.7
• /
• pp.690-698
• /
• 2010

Contamination of groundwater resources by organic chemicals has become an issue of increasing environmental concern. Surfactant-enhanced aquifer remediation (SEAR) is widely recognized as one of the most promising techniques to remediate organic contaminations in-situ. Solutions of surfactant or surfactant with polymer are used to dramatically expedite the process, which in turn, may reduce the treatment time of a site compared to use of water alone. In the design of surfactant-based technologies for remediation of organic contaminated aquifers, it is very important to have a considerable analysis using extensive numerical simulations prior to full-scale implementation. This study investigated the formation and flow of microemulsions during SEAR of organic-contaminated aquifer using the finite difference model UTCHEM, a three-dimensional, multicomponent, multiphase, compositional model. The remediation process variables considered in this study were the sequence of injection fluids, the injection and extraction rate, the concentrations of polymer in surfactant slug and chase water, and the duration of surfactant injection. For each variable, temporal changes in injection and production wells and spatial distributions of relative saturations in the organic phase were compared. Cleanup time and cumulative organic recovery were also quantified. The study would provide useful information to design strategies for the remediation of nonaqueous phase liquid-contaminated aquifers.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.23 no.2
• /
• pp.83-94
• /
• 2020

Busan Metropolitan City, a research site of this study, was promoted to a metropolitan city in 1995 with the implementation of the local autonomy system, and the overall change was made as it absorbed the surrounding areas to address the shortage of population and space. Twenty-five years after the introduction of the local autonomy system, it is necessary to diagnose whether balanced development of the entire city is being made in accordance with the reorganization of the metropolitan city in terms of spatial structure. In this study, changes in spatial structure and regional characteristics were analyzed by applying population potential, which means potential for future spatial interaction, in time and space. According to the analysis, the development was taking place around the center area and the sub-center established by the urban master plan, but Gangseo-gu and Gijang-gun, which were incorporated in the past, remained stagnant. In addition, it was shown that the spatial expansion of the city was suppressed by the green belt surrounding the city. However, in other regions where the green belt is located, the city has been expanded, which is different from Gijang-gun or Gangseo-gu, which was incorporated into the metropolitan city. Therefore, the cause of the decline in incorporated areas should not be limited to the institutional dimension of land use regulation. Growth management and balanced development plans will be necessary for the development of declining old downtowns and underdeveloped incorporated areas.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.2
• /
• pp.55-68
• /
• 2014

Some infrastructure these days is usually constructed under the ground for it to not interfere the foot-traffic of pedestrians, and thus, it is difficult to visually confirm the accurate location of the site where the establishments must be buried. These technical difficulties increase the magnitude of the problems that could arise from over-reliance on the experience of the worker or a mere blueprint. Such problems include exposure to flood and collapse. This paper proposes a constructor-oriented visualization system via mobile gadgets in general construction sites with occluded structures. This proposal is consisted with three stages. First, "Stage of detecting manhole and extracting features" detects and extracts the basis point of occluded structures which is unoccluded manhole. Next, "Stage of tracking features" tracks down the extracted features in the previous stage. Lastly, "Stage of visualizing occluded constructions" analyzes and synthesizes the GPS data and 3D objects obtained from mobile gadgets in the previous stages. This proposal implemented ideal method through parallel analysis of manhole detection, feature extraction, and tracking techniques in indoor environment, and confirmed the possibility through occluded water-pipe augmentation in real environment. Also, it offers a practical constructor-oriented environment derived from the augmented 3D results of occluded water-pipings.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.09a
• /
• pp.44-52
• /
• 2002

Low temperature thermal desorption (LTTD) has become one of the cornerstone technologies used for the treatment of contaminated soils and sediments in the United States. LTTD technology was first used in the mid-1980s for soil treatment on sites managed under the Comprehensive Environmental Respones, Compensation and Liability Act (CERCLA) or Superfund. Implementation was facilitated by CERCLA regulations that require only that spplicable regulations shall be met thus avoiding the need for protracted and expensive permit applications for thermal treatment equipment. The initial equipment designs used typically came from technology transfer sources. Asphalt manufacturing plants were converted to direct-fired LTTD systems, and conventional calciners were adapted for use as indirect-fired LTTD systems. Other innovative designs included hot sand recycle technology (initially developed for synfuels production from tar sand and oil shale), recycle sweep gas, travelling belts and batch-charged vacuum chambers, among others. These systems were used to treat soil contaminated with total petroleum hydrocarbons (TPH), polycyclic aromatic hydrocarbons (PAHs), pesticides, polychlorinated biphenyls (PCBs) and dioxin with varying degrees of success. Ultimately, performance and cost considerations established the suite of systems that are used for LTTD soil treatment applications today. This paper briefly reviews the develpoment of LTTD systems and summarizes the design, performance and cost characteristics of the equipment in use today. Designs reviewed include continuous feed direct-fired and indirect-fired equipment, batch feed systems and in-situ equipment. Performance is compared in terms of before-and-after contaminant levels in the soil and permissible emissions levels in the stack gas vented to the atmosphere. The review of air emissions standards includes a review of regulations in the U.S. and the European Union (EU). Key cost centers for the mobilization and operation of LTTD equipment are identified and compared for the different types of LTTD systems in use today. A work chart is provided for the selection of the optmum LTTD system for site-specific applications. LTTD technology continues to be a cornerstone technology for soil treatment in the U.S. and elsewhere. Examples of leading-edge LTTD technologies developed in the U.S. that are now being delivered locally in global projects are described.

• Journal of Information Technology and Architecture
• /
• v.9 no.2
• /
• pp.177-186
• /
• 2012

Navy establishes the Naval Task Forces (TF) for many kinds of maritime operations. Then the TF in the maritime environment performs simultaneous component operations such as ASUW (Anti-Surface Warfare), ASW (Anti-Submarine Warfare), AAW (Anti-Aircraft Warfare), and assault operations. The TF consists of many tactical systems for the completion of missions C4I, VOIP (Voice Over Internet Protocol), DMHS (Digital Massage Handling System), and TDLs (Tactical Data Links) such as LINK-11, 16, ISDL (Inter Site Data Link). When the TF executes naval operations to complete a mission, we are interested in the kill chain for the maritime operations in the TF. The kill chain is a standard procedure for the naval operations to crush enemy defenses. Although each ship has a procedure about a manual for 'how to fight', it leave something to be desired for the TF detailed kill chain currently. Therefore, in this paper, we propose the naval TF's kill chain to perform the naval operations. Then, the operational effectiveness of the TF in the kill chain environment is determined through operation scenarios of TDL system implementation. It is to see the operational information sharing effect to a data link model based on MND-AF OV 6c (statement of tracking operational status) in the maritime operations applied to TDL and is to identify improvements in information dissemination process. We made the kill chain of maritime TF for the effective naval operations.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.2
• /
• pp.104-111
• /
• 2008

The ECG is biomedical electrical signal occurring on the surface of the body due to the contraction and relaxation of the heart. This signal represents an extremely important measure for health monitoring, as it provides vital information about a patient's cardiac condition and general health. ECG signals are contaminated with high frequency noise such as power line interference, muscle artifact and low frequency nose such as motion artifact. But it is difficult to filter nose from ECG signal, and errors resulting from filtering can distort a ECG signal. The present study implemented a small-size and low-power ECG measurement system that can remove motion artifact for convenient health monitoring during daily life. The implemented ECG monitoring system consists of ECG amplifier, a low power microprocessor, bluetooth module and monitoring program. Amplifier was designed and implemented using low power instrumentation amplifier, and microprocessor was interfaced to the ECG amplifier to collect the data, process, store and feed to a transmitter. And bluetooth module used to wirelessly transmit and receive the vital sign data from the microprocessor to an PC at the receiving site. In order to evaluate the performance of the implemented system, we assessed motion artifact rejection performance in each situation with artificially set condition using adaptive filter.

• Archives of design research
• /
• v.19 no.2 s.64
• /
• pp.163-172
• /
• 2006

Sign is one of the important factors in city and national image formation, thus requires high level of quality. However, domestic sign emphasize only the sense of attention that leads to big sized signs, thus often results in a poor coordination with the surrounding space. This situation requires employees in sign business want to learn specialized knowledge about design field. Based on these circumstances, we propose sign design software to employees in sign business field as an aid tool that can help to develop good signs in terms of functionality as well as harmony of design. Thus, in this investigation, sign simulation software application case that can design sign and apply this sign to the actual application site is presented. In order to develop this software, literature survey and preliminary studies were performed to analyze the preparation process and environment, and designed sign design element and software elements, user interrace, and finally Java software were utilized. This developed software can be used as a textbook in sign design related departments in schools, and hopefully to enhance the social recognition of sign as well as academic interest.

• Journal of Information Management
• /
• v.41 no.4
• /
• pp.187-204
• /
• 2010

This study shows evaluation of how much OASIS meets "the korean web content accessibility guidelines" and analysis of some of the accessibility problems and their solutions in OASIS(Oriental Medicine Advanced Searching Integrated System) which is the only web site that offers papers and project information related to Traditional Medicine in Korea. The evaluation criteria to determine if OASIS is accessible is classified into four sub items; Perceivable - if information and user interface components is presentable to users in ways they can perceive, Operable - if user interface components and navigation are operable, Understandable - if information and the operation of user interface are understandable, Robust - if content is robust enough that it can be interpreted reliably by a wide variety of user agents, including assistive technologies. Based on the measured results, OASIS has just been redesigned and implemented in more accessible and effective way. OASIS that improves web accessibility for the disabled is expected to help them study oriental medicine more easily and conveniently by providing equal access and equal opportunity to use the web.