• 대한한의진단학회지
• /
• 제19권2호
• /
• pp.101-108
• /
• 2015

Objectives This paper focused on developing the acupuncture-moxibustion device for head. Disadvantages of the existing devices for head moxibustion are its hume and inconvenience in operating because of the hair. Methods The proposed acupuncture-moxibustion device for GV20(Baihui) is 10mm long as needle body and 6mm long as needle root whose feature are 1~2 turns spiral coil. The spiral coil contains the moxa in order not to drop the moxa while operating Results The direct temperature on the burning moxa were measured by TK-305 infrared thermometer. But the direct temperature on the needle of acupuncture-moxibustion device were not able to measure by TK-305 infrared thermometer. By definition equation, the indirect temperatures on the needle of acupuncture-moxibustion device were able to be calculated. Conclusion A very safe, small and cheap acupuncture-moxibustion device for GV20(Baihui) of head is proposed. It will be useful to generate the heat shock protein and to operate in preventing and curing the Alzheimer's disease.

• 한국도로학회논문집
• /
• 제20권4호
• /
• pp.35-46
• /
• 2018

PURPOSES : The purpose of this study is to compare the lane curing time of natural drying and a lane drying device when painting lines on a highway. METHODS : The painting process was carried out in July 2015 and September 2015, respectively, for the Gimcheon IC - Gimcheon JC. After the painting, measurements were obtained three times at six measurement points located at 20 m intervals on the shoulder line and the dividing line. The curing time was measured for natural drying and drying using a lane drying device, and compared for different pavement types (asphalt, concrete) and paint types (waterborne paint, methyl methacrylate paint). RESULTS : The results of the lane curing time comparison on the highway are as follows. The combination of asphalt and methyl methacrylate paint cured more rapidly during both the natural drying and drying using the lane drying device. Finally, it was cured at least 32.2% and 40.7% faster when using a drying device than in natural drying. CONCLUSIONS : The comparison of lane curing time of the highway showed that the combination of asphalt and methyl methacrylate paint cured more rapidly when using both natural drying and a lane drying device.

• 대한의용생체공학회:의공학회지
• /
• 제41권4호
• /
• pp.165-171
• /
• 2020

In this study, it focuses on the development of radiographic devices for patellar imaging. On the previous X-ray examination of patella and patellofemoral joint, it analyzed the problems which could affect the results: unstable patients' pose, radiation exposure, and deterioration of image quality. The purpose of the research is to propose a future use of a developed device with an explanation of the process, function, and advantage of the device including the methods. The device is developed to focus on the diagnosis of the longitudinal and longitudinal fractures of the patella and patella/femoral joint, displacement such as dislocation, bone formation, stenosis of the patella/femorla joint, and cartilage wear. Due to the patient's anxious posture, it caused a shaking image, overlapping structures, and etcs, these factors challenge to diagnose accurately. In addition, the existing Settegast method and Hughston method, which are most frequently performed in the hospital field, are not suitable for the presence or absence of features or dislocation due to the heavy load on the patella of the patient. The developed device requires patients in a lying position and placing only their leg on the device, it increases the conveniences of the examination and decreases unnecessary radiation exposure of the patient except the patellar examination area. Moreover, one of the systems in the device fixes the detector, where the patients no longer need to hold the detector nor be in unstable posture, but describes the structure of the patella/femoral joint more clearly. Hoping the device will apply to more patients.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.971-974
• /
• 2005

In this paper, we describe photonic sensor interface in SOPC(System on a programmable chip) platform. This platform uses device that has ARM922T processor and APEX FPGA area on a chip. We use two development kits. The one is embedded kit that using Intel's Xscale device, the another is SOPC kit that using Altera's Excalibur device. We implement some device logic that DMAC, ADCC, etc. and application.

• 한국초전도ㆍ저온공학회논문지
• /
• 제19권4호
• /
• pp.18-21
• /
• 2017

We report a method for improving heat exchange between cryo-cooled large-power-dissipation devices and liquid cryogen. Micro-machined monolithic heat sinks were fabricated on a high integration density superconducting Josephson device, and studied for their effect on cooling the device. The monolithic heat sink showed a significant enhancement of cooling capability, which markedly improved the device operation under large dc- and microwave power dissipation. The detailed mechanism of the enhancement still needs further modeling and experiments in order to optimize the design of the heat sink.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.51.5-51
• /
• 2002

In this paper, we propose and developed a keyglove using the touch-typing method as new solutions to the problem of text input into the mobile computing devices. This device recognizes that character is typed in though the hand's movements analysis and requires no additional space on a person's desktop or work surface, and can be easily used with computers of any size, even the smallest mobile computer, and is designed as an input device for wearable computers and virtual environment. The concept of the wearable input device based on human hand-molies recognition.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(2)
• /
• pp.37-40
• /
• 2000

This paper has been studied on characteristics of organic light-emitting device with various cathode materials. These catode materials were Al：Li(5%), Al, Cu, CsF/Al. And in these devices, HTL(hole transfer layer) was TPD and EML(emitting layer) was Alq$\sub$3/. We studied the I-V characteristics for each device. And then, the turn-on voltage of device for Al-Li(5%), Al, Cu, CsF/Al cathode were 7, 9, 13, 3V respectively. So, the CsF/Al cathode is superior to other cathode materials for I-V characteristics.

• 대한인간공학회지
• /
• 제35권6호
• /
• pp.519-533
• /
• 2016

Objective: This study lays its aims at the definition of relevant operation method and function by researching on the value to be brought when applying smart device that can hand carry soft and flexible materials like jelly. Background: New technology and material play a role in bringing type transformation of interface and change of operation system. Recently, importance has been increased on the study of Organic User Interface (OUI) that conducts research on the value of new method of input and output adopting soft and flexible materials for various instruments. Method: For fulfillment of the study, 27 kinds of gestures have been defined that are usable in handheld device based on existing studies. Quantitative research of survey was conducted of adult male and female of 20s through 30s and an analysis was done on the function that can be linked to gestures with highest level of satisfaction. In order to analyze needs and hurdles of users for the defined gesture, a focus group interview was conducted aiming at the groups of early adopters and ordinary users. Results: As a result, it was found that users have much value regarding usability and fun for elastic device and analysis could be conducted on preferred gesture and its linkable functions. Conclusion: What is most significant with this study is that it sheds new light on the values of a device made of elastic material. Beyond finding and defining the gestures and functions that can be applied to a handheld elastic device, the present study identified the value elements of an elastic device - 'usability and 'fun' -, which users can basically desire from using it. Application: The data that this study brought forth through preference and satisfaction test with the gestures and associated functions will help commercialize an elastic device in future.

• 한국IT서비스학회지
• /
• 제11권3호
• /
• pp.161-175
• /
• 2012

A novel concept of ICT based service, which is called N-device service, is proposed and implemented in the form of N-device smart education services. The N-device services are different from the existing N-screen services in terms of the number of devices a user is using for a specific service at the same time. A N-device service consists of several smart devices which are different in size, software and hardware platform, mobility, manufacturer and the like by fully utilizing the characteristic of each device. The major and unique features of N-device services are analyzed and depicted in a strict way. Those are shared role for each device, service by configurable device, one sensor multiple use, real-time data sharing, role shifting and new market creation. It is turned out that the N-device service is more human centric compared with existing ICT based services and can give richer digital experience to users because non-existent services become possible with the new concept. However, there exist several barriers to be implemented and commercialized in the real world. Those include high development cost and time, small market and different application platforms of devices. These barriers can be overcome by technical advances and cooperation between relevant parties. The smart education is very prominent area, in which the novel concept can be applied with high priority because Korean government announced its plan to boost up new educational services with big budget and these are acceptable by enthusiastic Korean parents and students. That's why the N-device service is implemented in the education area, which is called as "livessam(live teacher)," with four smart devices, IPTV, tablet PC, PC and smart phone. By providing both detailed service scenario and techniques, we shows that the novel education service is technically feasible and acceptable by teachers and students.

• 대한간호학회지
• /
• 제38권4호
• /
• pp.582-592
• /
• 2008

Purpose: The purpose of this research was to analyze the effects of an eye protective device and ear protective device application on sleep disorder with coronary disease patients in CCU. Methods: The research design was set up as a nonequivalent control group non-synchronized design. The subjects were coronary disease patients in the CCU of a tertiary hospital. The subjects were composed of 20 in the group with an eye protective device, 18 in the group with an ear protective device, 17 in the group with an eye protective device and ear protective device and 20 in the control group. The data was analyzed by $X^2-test$, ANOVA, Repeated measures ANOVA, Sheffe-test, Simple main effect and Time contrast using SPSS Win 12.0. Results: The hypothesis, 'There are significant differences in sleep quantity among the four groups' was supported (F=1,342.71, p=.000). The hypothesis, 'There are significant differences in the subjective evaluation of the general sleep patterns among the four groups' was supported (F=3,638.73, p=.000). In addition the hypothesis, 'There are significant differences in degree of sleep among the four groups' was supported (F=1,616.61, p=.000). Conclusion: It is cost effective and a simple eye protective device and ear protective device should be applied to patients according to their preference and characteristics in the clinical setting.