• Journal of the Semiconductor & Display Technology
• /
• v.8 no.4
• /
• pp.53-58
• /
• 2009

A SMT mounter is a kind of equipment that mounts SMD parts quickly on the printed circuit board. By using linear motors, it is controlled with high speed and precision, which is similar to semi-conductor and display process equipment. It is necessarily used in an assembly process of an electronic device. Mobile devices such as a mobile phone and PDA are required to reduce mount areas due to the demands for high performance and small size. Hence, super small sized and complex mobile devices have been developed. To improve the productivity of the corresponding equipment, designs with large sized, high speed, and multidisciplinary functions have been consistently performed. Meanwhile, a design trend of large size and light-weight on SMT mounter causes a low natural frequency of systems and vibration problems at the high speed operation. In this paper, the dynamic characteristics of the SMD mounter system were investigated through a modal test and transmissibility test, and verified by finite element method. Also, various design improvement was performed to avoid the resonance phenomena.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2731-2734
• /
• 2011

Korean-Automated Guideway Transit (K-AGT) was successfully developed through Light Rail System Development Project. Since then, the domestic development rate of on-board signalling system of light rail has been improved up to 90% by Practical Utilization Project of Light Rail. After utilization project, furthermore, POSCO ICT has developed the wayside signalling system of CBTC, including wireless communication equipment. KRRI carried out the performance test of the wireless communication, interfacing and using the other CBTC equipments of KyungSan Test Line so as to see whether it conforms IEEE 802.11x, international communication standard in view of operational concept of CBTC. In this paper, we presents the test plan, test items, and the analysis results of maximum communication distance tests between on-board and wayside radio sets.

• Proceedings of the KSR Conference
• /
• 2003.05a
• /
• pp.139-144
• /
• 2003

This study was aimed to establish failure management plan of the rubber-tired AGT light rail vehicle for its safety case, which was developed according to the Korean standardized specifications for the light rail vehicle. Vehicular 9 failure modes anticipated during the system operation were considered, which are single malfunction of redundant equipment, malfunction of train radio, public address and air compressor, battery, main circuit NFB trip, on-board ATO control device malfunction, on-board ATP control device malfunction, fail of brake release, flat tire, train emergency door open.

• Journal of Navigation and Port Research
• /
• v.39 no.3
• /
• pp.193-198
• /
• 2015

This research was conducted to provide an improvement plan concerning medical treatment on board and medical health care conditions for seafarers. 139 persons from government agencies and seafarer related organizations, who could influence the government's seafarers healthcare policy-making, were asked to fill in the questionnaire prepared for this research about their perceptive views on actual condition of health and disease management for seafarers. The results of the survey on seafarer's health care management conditions(p<0.01), health care manage ability(p<0.01), current radio emergency medical service policy(p<0.01), usefulness of on board medicine chest and medical equipment(p<0.05), and the system of the onboard medical care persons show the difference of perception level among the seafarer related organizations. But generally, the rate of negative responses was high. And this research suggests that there is an urgent need to provide portable health measurement equipment on board, reenforce regular medical examination and establish the seafarer's health promotion center for telemedicine and healthcare management(p<0.01) in order to improve the onboard medical treatment support system for healthcare of seafarers.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.731-735
• /
• 2006

The Rolling Stock pursues more safe, speedy and accurate operation on the increment of the passenger and the short headway. Signalling system is providing an assurance on safety and reliability of the system, which is based on fail-safe concept. Therefore we are willing to study up on MMI device for new onboard ATP/ATO equipment which is used for driver to recognize train status and fault more quickly and to solve any problem more rapidly, which can maximize the stability and reliability of the system.

• Physical Therapy Korea
• /
• v.23 no.3
• /
• pp.40-47
• /
• 2016

Background: Assessments of Sit-to-Stand (STS) and gait functions are essential procedures in evaluating level of independence for the patients after stroke. In a previous study, we developed the software to analyze center of pressure (COP) in standing position on Wii Balance Board (WBB). Objects: This purpose of this study is to measure test-retest reliability of ground reaction forces, COP and time using WBB on STS and gait in healthy adults. Methods: Fifteen healthy participants performed three trials of STS and gait on WBB. The time (s), vertical peak (%) and COP path-length (cm) were measured on both tasks. Additionally, counter (%), different peak (%), symmetry ratio, COP x-range and COP y-range were analyzed on STS, 1st peak (%), 2nd peak (%) of weight were analyzed on gait. Intra-class correlation coefficient (ICC), standard error measurement (SEM) and smallest real difference (SRD) were analyzed for test-retest reliability. Results: ICC of all variables except COP path-length appeared to .676~.946 on STS, and to .723~.901 on gait. SEM and SRD of all variables excepting COP path-length appeared .227~8.886, .033~24.575 on STS. SEM and SRD excepting COP path-length appeared about .019~3.933, .054~11.879 on gait. Conclusion: WBB is not only cheaper than force plate, but also easier to use clinically. WBB is considered as an adequate equipment for measuring changes of weight bearing during balance, STS and gait test which are normally used for functional assessment in patients with neurological problems and elderly. The further study is needed concurrent validity on neurological patients, elderly patients using force plate and WBB.

• Journal of Advanced Navigation Technology
• /
• v.23 no.5
• /
• pp.460-465
• /
• 2019

In this study, we aim to derive a solution from the structural analysis for electrical failure of single board computers for computing navigation information. By analyzing the characteristic factor, we identify that crack occur on the central processing unit board due to a certain structural problem, and that the physical effect by the crack make communication function be impossible to perform, which it causes booting error. In order to find the location of excessive stress causing the crack, structural analysis for the single board computer is done. From the structural analysis, the areas where stress concentration occurs are identified, and improvement methods changing the structures are developed. As a result, we shows that stresses are reduced entirely on the stress distribution for the improved structure. In addition, heat analysis shows that changing the structure to reduce stresses is not affect to the heat radiation, and the thermal resistance of the actual equipment is verified by measuring the temperature of the heat sink applied with the improved structure.

• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.4
• /
• pp.994-1005
• /
• 2016

Expansion and spreading of marine telemedicine is rather restricted due to the conflict of laws relating to medical service and lack of provisions in the Seafarers' Act, Medical Service Act, etc. Thus, this study is intended to reveal the current status and problems of marine emergency medical advice system for the furtherance of health care of seafarers and emergency medical assistance conditions and deduce relevant proposals for legislative improvements thereof in order to resolve underlying problems and issues. The results of this study can be summated as follows. First, in respect of directions to provide marine emergency service based on marine telemedicine system, emergency radio medical advice system needs to be strengthened to meet domestic and international instrument, marine telemedicine system needs to be provided through integrating u-Health technology and special marine medical center needs to be established. Second, regarding directions to provide health promotion service based on the marine telemedicine system, a new process of health care service for seafarers needs to be devised and provided involving seafarers' life cycle covering from prior to boarding to after leaving a ship. The conclusions of this study can be given as follows. First, the following new provisions need to be introduced in the Seafarers' Act. (1) The Minister of Oceans and Fisheries and a shipowner shall conduct matters pertaining to preventive health promotion and care for seafarers; (2) a provisions regarding establishment of seafarers' health promotion center by the Minister; (3) a special exemption permitting marine telemedicine service and qualification requirements for marine telemedicine assistant; (4) shipowner's obligation of carrying seafarers' health measuring equipment on board. Second, the relevant provisions regarding medical care persons needs to be revised in such a way that master or chief officer shall be appointed to be in charge of medical care on board. Last but not least, it is also essential to amend and update the minimum standards on drug and medicines to be carried on board and medicine chest and equipment on board.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1978-1983
• /
• 2008

With the increase in population, the area of human activities has expanded, resulting in the dramatic increase in the need for transportation system. Various infrastructures necessary for efficient logistics, however, have not been supplied enough and the logistics efficiency in Korea is in a bad situation now. As a result of the situation, the demand for the railroad transportation system that can provide large volume transportation has increased dramatically. An electric railway system is composed of high-tech subsystems, among which main electric equipment such as motors and converter are critical components determining the performance of electric vehicle. Among the on-board equipments, traction equipment is important part that has influence on safety and performances of vehicles. We is studied for high-speed train of foreign countries. From this research, we knows that axle weight of HEMU-400x is reasonable within 13ton.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.5
• /
• pp.1385-1392
• /
• 1999

This paper describes the design of the monitoring system for monitoring the current status and indirect controlling of the Wet Station Equipment which is used for cleaning the wafer. Most of the conventional monitoring system depend on the special hardware and software. Basic design goal of monitoring system is provide the convenience for the use and the portability for the system. In order for the system to fulfil its requirements, it was designed using GUI (Graphical User Interface) facility based on the windows NT environment of IBM PC compatible and EtherNet board based on the TCP/IP protocol.