• Journal of Advanced Navigation Technology
• /
• v.18 no.4
• /
• pp.371-375
• /
• 2014

In this paper, the solutions of TE(transverse electric) scattering problems by a resistive strip grating over a grounded dielectric layer are analyzed by applying the PMM(point matching method) known as a numerical method of electromagnetic fileld. The boundary conditions are applied to obtain the unknown field coefficients and the resistive boundary condition is used for the relationship between the tangential magnetic field and the induced surface current density on the resistive strip. The induced surface current density of resistive strip is obtained by difference of the up and down of the magnetic field in two boundary areas of the resistive strip. The numerical results for reflected power of zeroth order mode analyzed by according as the resistivity, the width and spacing of resistive strip, the relative permittivity and thickness of dielectric layer, and incident angles. The numerical results shown in good agreement compared to those of the existing papers using FGMM(fourier galerkin moment method).

• 한국지구물리탐사학회:학술대회논문집
• /
• 2008.10a
• /
• pp.179-184
• /
• 2008

Silt or clay alluvium fully saturated with water generally shows low resistivity. Sometimes it is believe that the low resistivity layer is considered as good aquifer but this makes problems in the development of groundwater. To overcome this problem, we adopted induced-polarization(IP) method with resistivity method. Laboratory experiments and resistivity/IP field surveys with non-polarization electrodes were conducted for the study. Laboratory experiments shows that the increase of clay contents in the sample mixed with sand and clay give low resistivity and high chargeability. We used this experiment results in the interpretation of resistivity/IP field data which were obtained in riverbank filtration. Finally, the layer which has low resistivity and chargeabilty would be regarded as a good aquifer for the development of groundwater intake.

• Composites Research
• /
• v.26 no.3
• /
• pp.201-206
• /
• 2013

The electrical resistance measurement was investigated as a damage monitoring method. In this study, 0.5 wt% Carbon nanotube reinforced polypropylene (CNT/PP) composites were evaluated under compressive fatigue loading. The shape of specimens was $20^{\circ}$ curved round type. Compression strength and electrical resistance were measured at different sections of specimen during compression. The microcracks of CNT/PP composites were detected based on the changing ratio of electrical resistance. Micro-damage during compressive fatigue test could be detected by electrical resistance measurements. The reason is that the contact points of CNTs in composites decreased under fatigue loading. During compressive fatigue test, larger change of electrical resistance was detected at the microcrack sections. It was proved that microcracks could be detected by electrical resistance measurement under compression test, whereas the real delamination parts were consistent with the predicted results by electrical resistance measurement.

• Journal of the Korean Geophysical Society
• /
• v.2 no.4
• /
• pp.269-276
• /
• 1999

As a part of trying to get the resistivity values correctly from laboratory core resistivity measurement, the effect of sample holders in resistivity measurement was analyzed and a better way to determine the representative resistivity value from the time series resistivity data was searched. Modified GS type and modified two-electrode type sample holders were devised and their effects have been compared with those of GS and two-electrode type sample holders. The modified two-electrode type sample holder has benefits both in repetition and simplicity in data acquisition. The analysis of distribution trend of the time series resistivity data obtained with different kind of sample holders and source frequencies shows that the maximum curvature point method gives the best result in determining representative resistivity value.

• Geophysics and Geophysical Exploration
• /
• v.13 no.4
• /
• pp.397-406
• /
• 2010

Resistivity method is a practical and effective geophysical technique to detect leakage zones in embankment dams. Generally, resistivity survey conducted along the crest assumes that the embankment dam has a 2D structure. However, the 3D topography of the embankment distorts significantly resistivity data measured on anywhere of the dam. This study evaluates the influence from 3D effects created by specific dam geometry and effects of water level fluctuations through the 3D finite element modeling technique. Also, a comparison between different locations of survey line are carried out, and topographic correction technique is developed for the resistivity data obtained along the embankment dam. Furthermore, using synthetic resistivity data for an embankment dam model with leakage zone, detectability of leakage zones is estimated through 2.5D inversion.

• Journal of the Korean Magnetics Society
• /
• v.18 no.1
• /
• pp.28-31
• /
• 2008

We studied the effect of easy magnetization axis orientation with respect to the strip direction by measuring the magnetoresistance(MR), the magneto-optic Kerr effect(MOKE), and real-time domain evolution. The five strips were patterned on a single chip with the easy axis orientation of each strip relative to the longitudinal direction by around $0^{\circ}$, $18^{\circ}$, $36^{\circ}$, $54^{\circ}$ and $72^{\circ}$, respectively. The overall shape of field dependent MR was mostly governed by the anisotropy magnetoresistnace. The relative change of the longitudinal MR was significantly increased with increasing angle between the easy axis and strip direction, whereas, the transverse MR variation rate was decreased with increasing angle. Several MR steps were observed during the magnetization reversal, and the simultaneous measurement of the MOKE and the domain images identified that the MR steps were associated with evolution of the oppositely directed magnetic domain.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.4
• /
• pp.21-26
• /
• 2019

In this paper, TE(transverse electric) scattering problems by a resistive strip grating between a double dielectric layer are analyzed by using the PMM(point matching method) known as a numerical method of electromagnetic fileld. The boundary conditions are applied to obtain the unknown field coefficients, the scattered electromagnetic fields are expanded in a series of Floquet mode functions, and the resistive boundary condition is applied to analysis of the resistive strip. The numerical results for the normalized reflected and transmitted power are analyzed by according as the width and spacing of resistive strip, the relative permittivity and thickness of the double dielectric layers, incident angles, and uniform resisitivity. Typically, the reflected power for the conductive strip increased as the value of the relative dielectric constant increased, the reflected power for the resistive strip with uniform resistivity decreased as the value of the resisvivity increased. The numerical results for the presented structure of this paper are shown in good agreement compared to those of the existing papers.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.29 no.3
• /
• pp.203-208
• /
• 1984

This study was investigated to know the possible linkage relationship between blast resistance gene and plant height gene in rice. Two resistant varieties, Tadukan and Tetep were crossed with six susceptible semi-dwarf tester lines. Progenies derived from the crosses were inoculated with spray method at 3-4 leaf stage with blast races, C-8$^{+t}$ and T-2$^{+t}$. The results indicated that: (1) Resistance of Tadukan and Tetep to the C-8$^{+t}$ was controlled by a single dominant gene, respectively. (2) Resistance of Tadukan and Tetep to the T-2$^{+t}$ was expressed by complementary gene action between two dominant genes, respectively. (3) No linkage relationship was found between resistance gene and plant height gene of both Tadukan and Tetep when tested with C-8$^{+t}$ and T-2$^{+t}$, respectively.espectively.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.3-3
• /
• 2021

하천의 식생은 생태서식처 제공, 강턱이나 하안 경사의 안정, 영양염류나 오염물 차단에 의한 수질 개선 등의 다양한 생태서비스를 제공하는 반면, 과도하고 편중된 식생 분포로 인해 흐름저항이 증가하고 이로 인한 홍수위 상승과 홍수피해 위험이 가중될 수 있다. 기후변화 영향과 토지이용 변화에 따른 수리수문 특성 변화와 유역으로부터 영양염류의 유입은 하천내 식생이 과도하게 퍼지는 직접적인 원인이 될 수 있다. 과도한 식생분포로 인한 흐름저항과 홍수위 상승을 평가하기 위해 식생하도의 흐름저항과 관련된 매개변수의 다양성과 복잡성에 따른 해석상의 한계에도 불구하고 이에 대한 이론적 해석과 수학모형의 개발, 실험실 수로와 하천현장조사, 수치모형을 이용한 예측 등의 다양한 연구가 수행되고 있다. 본 연구에서는 소규모 실험실 수로에서 단순화된 식생 구조와 배열이 적용되는 한계성과 상류에서 유입되는 유량과 유속 등의 수리조건을 통제할 수 없는 현장실험의 한계성을 보완하고자 목본류 형태의 식생패치를 실규모 하천실험 수로에 조성하여 통제된 수리조건에서의 식생하도의 구간 흐름저항을 추정하기 위한 계측 실험을 수행하였다. 실규모 실험에서는 피에조미터 형식의 정밀 압력식 센서를 이용하여 수위와 수면경사를 계측하였으며, 실험구간의 접근 수로에서 ADCP(Acoustic Doppler Current Profiler)를 이용하여 유입 유량에 대한 정보를 수집하였다. 전체 수로 길이 약 600 m, 하폭 11 m, 깊이 2 m 규모의 실규모 하도 일부 80 m 완경사 구간에 식생패치를 설치하고 구간 수면경사를 실측함으로써 식생하도의 흐름저항을 직접 산정하였다. 이러한 실규모 식생하도의 실험을 통해 식생패치의 밀도, 횡적 차단면적, 구간 차단부피, 목본 식생의 물리적 특성, 식생패치의 배열 등의 다양한 식생분포 조건에 따른 수리조건별 흐름저항 값의 변화를 분석할 수 있다. 식생하도에 대한 정확한 흐름저항 추정과 홍수위 변화에 대한 해석은 하천 식생의 생태서비스와 홍수방어의 하천 치수효과의 최적 솔루션을 제시하기 위한 하도관리의 다양한 방안을 제시하는데 필수적인 정보로 활용될 수 있다.

• Weed & Turfgrass Science
• /
• v.2 no.1
• /
• pp.1-7
• /
• 2013

Studies were carried out to provide basic information for establishing the weed control in Chungbuk, Korea. The present surveys targeting 260 farmers in Chungbuk province were conducted for the cultivation system, weeds occurrence and usage of herbicides. To estimate the occurring area of herbicide resistant weeds, soil samples from 400 paddy fields were collected twice on August, 2011 and April, 2012. In the results of survey, the 99.6% of farmers used the rice planting machine and the 78% of the farmers disseminated herbicides twice to control weeds before and after planting rice. The most commonly used herbicide were as follows; soil-applied herbicide : butachlor 46.6%, mid-term herbicide : mefenacet + pyrazosulfuron-ethyl 10.7%, foliar herbicides : bentazone 62%. The dominant paddy field weeds included Echinochloa crusgalli (16.2%), Scirpus juncoides (12.2%), Monochoria vaginalis (11.9%) and Sagittaria trifolia (9.5%). Occurrence area of sulfonylurea herbicide resistant weeds was 13,659 ha in 26.8% of the paddy area. Monochoria vaginalis showed the highest with 4,605 ha (36.4%) followed Scirpus juncoides (30.7%), and Lindernia dubia (10.6%) at 2011. Monochoria vaginalis and Scirpus juncoides occurred were evenly distributed and the most problematic weed in Chungbuk, Korea.