• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.05a
• /
• pp.442-446
• /
• 2004

KOMPSAT series use software-controlled unregulated bus system in which the main bus is directly connected to a battery and the duty-ratio for PWM switch is controlled by the on-board satellite software. This paper proposes a new power-stage circuit that can be available for modularization of the power regulator which is used at the software-controlled unregulated bus system satellite. And we analyze the proposed power-stage operation according to its operating modes and verify it by performing software simulation and hardware experiment using prototype. We constructs a parallel-module converter which is composed of proposed power-stages and perform experiment to verify modular characteristics of the proposed power-stage. Finally, we verify the usefulness of the proposed power-stage by comparing above results with those of a parallel-module converter made of conventional power-stages.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.11a
• /
• pp.852-854
• /
• 2010

MCM-ERC32 는 우주 환경에서 동작하는 시스템에 사용할 목적으로 유럽에서 개발된 집약 프로세서 모듈이다. MCM (Multi Chip Module)은 크게 ERC32 single chip 과 VASI (Very Advanced Sparc Interface) 및 6MByte 의 SRAM, 32MByte 의 DRAM 으로 구성되어 있다. VASI 의 경우 각종 I/O 처리 및 timer 의 기능을 수행하며 특히 VASI RTC 의 경우 VASI cycle, slot 을 이용하여 다양한 형태의 timer 구현이 가능하다. Timer 의 경우 각종 태스크의 관리와 스케줄링에 사용되는 가장 기본적이며 매우 중요한 요소이다. 위성의 고유 시간 역시 timer 를 활용하여 설계하게 되는데 이 부분이 잘 구현 되어야 정확한 임무 수행 및 위성의 제어가 가능하다. 본 논문에서는 VASI RTC 의 구조와 기능에 대해 설명하고 이를 위성의 고유 시간 운영에 적용하는 방법에 대해 다루도록 하겠다.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.132-137
• /
• 2004

On-Board Diagnostic(OBD) systems are in most cars and light trucks on the load today. During the 1970's and early 1980's manufacturers started using electronic means to control engine functions and diagnose engine problems. The CARB's diagnostic requirements to meet EPA emission standards have been designated as OBD with a goal of monitoring all of the emissions-related components, as well as the chassis, body, accessory devices and the diagnostic control network of the vehicle for proper operation. In this paper, we present a remote measurement system for the wireless monitoring of diagnosis signal and sensors output signals of ECU adopted KWP2000, united the OBD communication protocol, on OBD-compliant vehicle using the wirless communication technique of Bluetooth. In order to measure the ECU signals, the interface circuit is designed to communicate ECU and designed terminal wirelessly according to the ISO, SAE regulation of communication protocol standard. A microprocessor S3C3410X is used for communicating ECU signals. The embedded system's software is programmed to measure the ECU signals using the ARM compiler and ANCI C based on MicroC/OS kernel to communicate between bluetooth modules using bluetooth stack. The diagnostic system is developed using Visual C++ MFC and protocol stack of bluetooth for Windows environment. The self-diagnosis and sensor output signals of ECU is able to monitor using PC with bluetooth board connected in serial port of PC. The algorithms for measuring the ECU sensor output and self-diagnostic signals are verified to monitor ECU state. At the same time, the information to fix the vehicle's problem can be shown on the developed monitoring software. The possibility for remote measurement of self-diagnosis and sensor signals of ECU adopted KWP2000 in embedded system verified through the developed systems and algorithms.

• Journal of Korea Multimedia Society
• /
• v.10 no.1
• /
• pp.66-73
• /
• 2007

SDR technology is a fundamental wireless access technology that combines and accommodates multiple wireless communication standards in one transceiver system through just modifying software using modular communication platforms without any hardware modifications for RF and IF signal processing on the basis of high performance DSP devices. Various communication systems that are designed under diverse and complex network environments require the communication platforms on the basis of SDR supporting reorganization to guarantee simple and fast communication interfaces among the respective wireless networks. This paper introduces a main idea on the implementation of platform on the basis of SDR and a communication platform is designed for experiments that is composed of a DSP board with TMS320C6713 CPU, a FPGA board processing IF signals, and a module with RF transceiver processing wireless LAN frequency bandwidth. Various modulation schemes(BPSK, QPSK, and 16QAM) used in communication systems are applied and tested on the designed platform and the test results shows that it is possible to design a reconfigurable communication terminal platform.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.1006-1011
• /
• 1993

In this study, a DNC(Distributed Numerical Control) management system is designed that can directly control and manage hybrid CNC machine tools on real-time. And management software is developed to inter-communicate field informations with CNC controllers using an interface processor(Intelligent Multi Communication Board, IMCB). Especially, IMCB supports that DNC system sends and receives part program with CNC controllers in the form of real-time multi-tasking.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.359-361
• /
• 2001

This paper reports on the development of Micro optical cross connector(MOXC) performance evaluation system using DAQ board and Labview. The system is composed of optical part, driving circuit and software part, this evaluation system can measure insertion loss, response time and life time of MOXC, this system canbe used in mass production of MOXC.

• Journal of Advanced Marine Engineering and Technology
• /
• v.18 no.3
• /
• pp.34-42
• /
• 1994

The present study is aimed to improve the PIV performance by suggesting a two-frame particle identification technique and by introducing estimation method of wall pressure distribution from the velocity data. Adopted image processing system consists of one commercial image board slit into a personal computer, 2-D sheet light generator, flow picture recording apparatus and related particle identification software. A revised particle tracking method essential to PIV performance is obtained by particle centroid correlation pairing (CCP) and its effectiveness is ascertained by comparison with multi-frame identification.

• 제어로봇시스템학회:학술대회논문집
• /
• 1986.10a
• /
• pp.225-231
• /
• 1986

A design of an industrial microcomputer control system for an one-through tube boiler using oil is presented. The microcomputer system is based on standard iSBC 88/40 board. The software consist of a RTE(real time executive) and application tasks. The designed control system saves fuel and gives a more reliable over-all operation.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.618-622
• /
• 1990

In this study LLC and MAC program, which is the base of the communication software, is implemented. This program is tested in the MAP board for IBM PC. The LLC is of class 3, which provides the services of type 1 and 3. The MAC uses the Token Passing Bus Access Method of IEEE 802.4 standard. The LLC is implemented in C language, and MAC in C language and 80186 assembly language. MAC program takes advantage of MC 68824 which is the token bus controller produced by Motorola.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.53-58
• /
• 2001

In this paper, a low price ultrasound image processing system is developed using DSP and PC. Ultrasound for image is generated by the 32-channel transducer. Ultrasound image is captured by DSP instead of the private image grabber board. Display of image and image processing algorithms are performed by PC. The image processing algorithms based on GUI are realized by software. So users without knowledge of image processing can perform the image enhancement more easily.