• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.836-839
• /
• 2002

This paper describes the selective Boolean operations on non-manifold geometric models whose union and subtraction operations are communicative. These operations guarantee the same resulting shape in spite of change of the order of Boolean operations, and the integrity of the model for omission of some features. In addition, a B-rep model for a modified modeling history is obtained in a short time, as no boundary evaluation is necessary. These features enable easy implementation of multi-resolution representation of B-rep models.

• International Journal of Precision Engineering and Manufacturing
• /
• v.2 no.3
• /
• pp.61-68
• /
• 2001

A linear motor has a lot of advantages in comparison with conventional feed mechanisms: high transitional speed, acceleration, high control performance and good positioning at high speed. Through the omission of a power transfer element, the linear motor shows no wear and no backlash, has along lifetime and is easy to assemble. Recently, the two types of linear motors, asynchronous and synchronous linear motors, are often applied to machine tools as a fast feed mechanism. In this paper, a comparison between the two types of linear motors as to power loss and thermal behavior is made. The heat sources of the linear motor-the electrical power loss in the motor and the frictional heat on the linear guidance-are measured and compared. Also, the temperature on the linear motor and machine structure is measured and presented.

• Journal of Environmental Science International
• /
• v.7 no.4
• /
• pp.505-510
• /
• 1998

This study has been carried out to investigate Electrostatic Precipitator's(ESP) performance enhancement and removal efficiency of fine particle according to (NH4)2SO4injection rate. The following conclusions are derived from the these test results : 1) For plant condition cases, according to the variation of concentration agent [(NH4)2SO4]-10ppm, when inlet dust loading was 2g/m2. And when Inlet dust loading was 3g/m", that was increased to 98 19% 99.16% 99.23%, 99.58%, 2) It Is seen from thins experiments that the increasing 30ppm concentration of (NH4)2SO4 increase the collection efficiency and fine particle omission control.

• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.6
• /
• pp.1272-1280
• /
• 2001

SrS:Ce thin films for blue EL devices were prepared by Hot Wall Method and their crystallographic and optical characteristics were investigated by various methods. Deposition rates were increased with SrS cell temperature, but the rates were independent on substrate temperature and sulfur pressure. The optical and crystallographic characteristics were strongly affected by deposition rates. The band gap energies obtained by optical transmission spectra and Full Width at Half Maximum of (200) plane in X-ray diffraction patterns were found at 4.5-4.6eV and $0.22~0.26^{\circ}$, respectively. The photoluminescence from SrS:Ce thin tiles showed a greenish blue omission peaked at 470 and 540nm.

• Journal of Korean Library and Information Science Society
• /
• v.25
• /
• pp.295-338
• /
• 1996

The findings from this study are summarized as follows : 1. It is questionable to define the term "Hanja" as "the Chinese Character used independently or used along with Hangul. 2. It is found to be a problem that the validity and objectivity in the selection of Hanja are lacking. 3. It is also a problem that there is neither principles nor consistency in styling of characters. 4. The system of arrangement has problems, too. The adoption of arrangement of Hanja by its Korean pronunciation results in lots of errors and mistakes. Besides, mistaken strokes and radicals produced considerable errors in the arrangement of Hanja. 5. The omission of the abbreviated Hanja in the Code can be considered to neglect the current trend of increased use of them. 6. The issue concerned with the Japanese-origin Hanja is that several number of Hanja deemed unnecessary are included.y are included.

• The Journal of Pediatrics of Korean Medicine
• /
• v.17 no.1
• /
• pp.29-51
• /
• 2003

This study was progressed for oriental medical care of neonates by fetal toxicosis removal therapy, and the results as follows: 1. The purpose of fetal toxicosis removal therapy : It removes dirty blood in neonatal mouth and prevents diseases. 2. Kinds of fetal toxicosis removal therapy : Radix Glycyrrhizae(甘草), Rhizoma Coptidis(黃連), Cinnabaris-Mel(朱蜜), Calculus Bovis(牛黃), Sojae Semen Praepartum, Juice of Semen Allii Tuberosi(非汁) and mercury(汞粉). 3. A period of fetal toxicosis removal therapy : At birth, 3rd day or so, one week or so, after umbilical omission. 4. Methods of fetal toxicosis removal therapy: Purgative therapy(下法) and Emetic therapy(吐法).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.04a
• /
• pp.265-268
• /
• 1997

Electroluminescent(EL) devices are constructed using multilayer organic thin film. A cell structure of glass substrate/Indium-Tinoxide/TPD as a hole transporting layer/Alq3+Rhodamine 101 perchrolate(Red3) as an emitting layer/Alq3 as an electrron transporting layer/Al as an electrode was employed. Optimal thickness of emitting layer in EL cell was performed from the viewpoint of the electronics properties of emitting layers. The general vapor-deposition method was used to control the thickness of omitting layer in EL devices and electro-optical characteristics were measured. It is clarified that controlling thickness of emitting layer in vapor-deposition film had an effect on the change of carrier injection and EL spectrum. The intensity of red omission with luminance of 81cd/$m^2$ was achived at 11V driving voltage. The surface morphology of emitting layer in EL devices was investigated.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.132-135
• /
• 2004

Building information plays a key role in diverse applications such as urban planning, telecommunication and environment monitoring. Automatic building extraction has been a prime interest in the field of GIS and photogrammetry. In this paper, we presented an automatic approach for building extraction from lidar data. The proposed approach is divided into four processes: pre-processing, filtering, segmentation and building extraction. Experimental results showed that the proposed method detected most of buildings with less commission and omission errors.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.11a
• /
• pp.13-14
• /
• 2011

The main purpose of this research is to propose standardization of construction components design with BIM and to develop WLCM Framework and Application System for supply chain management on interaction of stakeholders based on proposed standard component. To accomplish main purpose of this research, we planned three years period, in first year, we will develop model for building lifecycle based on BIM, and this model can give the chance of collaboration with stakeholders of building project. In second year, we will develop WLCM system with model, and to improve performance of application model/system. This study can contribute on reduction of whole lifecycle cost, with preventing omission of factors on cost reduction possibility, develop concurrent engineering framework for construction stakeholders with proposed BIM.

• Proceedings of the KIEE Conference
• /
• 1993.11a
• /
• pp.151-153
• /
• 1993

This paper proposes a novel motor drive system for the electric vehicle. In this paper, four-wheel-direct-drive type electric vehicle system is designed and the theoretical and experimental analysis of the system is investigated. The concept of steering not with steering the wheels but with the difference of the motor torque fives the flexibility of the vehicle design and, allows the omission of the differential gear, transmission gear, and drive axles. Thus the proposed system gives the space between wheels and improves the driver's steering performance.