• Proceedings of the Korea Society of Poultry Science Conference
• /
• 2001.11a
• /
• pp.89-91
• /
• 2001

Two experiments were conducted to compare the dietary supplemental influence of conjugated linoleic acid(CLA), soybean oil(SBO) and commercial tallow(U) on performance and physiological related factor of broiler chicks. Diets contained CP 21.5, 19% and ME 3,100, 3,100kcal/kg for starting and finishing period. Each three levels(1.0, 2.0, 3.0%) of CLA, SBO, CT were supplemented to basal diets. Five hundred forty and three hundred sixty chicks were applied to 3${\times}$3, 2${\times}$3 factorial design with four replicates in Expt 1 and 2. Weight gain, food intake and feed conversion were weekly examined. Blood cholesterol, ND antibody titer, blood components and were measured at the end of experiment. Metabolizable energy(ME) were measured through the metabolic feeding trial in each oil. ME was 8,542, 9,179, 8,133 kcal/kg in CLA, SBO and CT, respectively. In Expt 1, weight gain of chicks fed 1% dietary oil was significantly lower than other treatments(P<0.05). Feed conversion was significantly improved in SBO supplemental groups of all treatments(P<0.05). In Expt 2, CLA supplements increased weight gain significantly for finishing period(P<0.05) compared to that of other treatments. Feed conversion of chicks fed 2% dietary oil was significantly improved relative that of 3%(P<0.05). HDL of 3% dietary supplemental oil treatments was significantly higher for finishing and starting period in Expt 1 and 2, respectively than other treatments(P<0.05). There were no significantly different M Antibody titer in Expt 1, but showed significance between dietary supplemental oil in Expt 2(P<0.05). CLA content of breast meat was 12.23, 18.74, 25.67 mg/g in 1, 2, and 3% CLA treatments and significantly different between them(P<0.05). As the results of these experiments, feeding CLA tended to improve the weight gain compared In that of other dietary oil, but was not increase the ND antibody titer of broiler chciks. CLA content of breast meat also showed the significance at different level of dietary supplement.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.1
• /
• pp.102-105
• /
• 2002

Seventy-two crossbred pigs weighing an average of 41.5 kg were assigned on the basis of sex, weight and litter to one of four dietary treatments in a factorial (4 treatments${\times}$2 sexes) arrangement. The control diet was based on barley and soybean meal while the experimental treatments consisted of diets in which a portion of the dietary protein was supplied by 20% of a 50:50 blend of extruded ($130^{\circ}C$ for 20 to 25 sec) peas and full-fat canola seed, 20% of a 50:50 blend of unextruded peas and full-fat canola seed or a diet containing 10% peas, 6% canola meal and 4% canola oil (to equal the level of canola oil provided by 10% whole canola seed). Digestibility coefficients for dry matter, crude protein and gross energy were significantly higher (p<0.05) for the control diet than for the other three diets. Extrusion produced no beneficial effects (p>0.05) on nutrient digestibility and there were no differences in digestibility between the diet based on intact canola seed compared with the diet containing canola meal and oil. Choice of protein supplement had no significant effects on gain, feed intake or feed conversion during the grower or finisher phases and over the entire experimental period. Extrusion of the pea-canola blend produced no beneficial effects on pig performance as the performance of pigs fed either the extruded or unextruded blend of peas and canola seed was similar. In addition, the performance of pigs fed diets containing intact canola seed was similar to that of pigs fed canola meal and oil. Castrates gained faster and consumed more feed than gilts (p<0.05). However, their feed conversion was poorer than that of the gilts during the finisher period. There were no significant differences in carcass traits between pigs fed the control and any of the experimental treatments. Extrusion had no effect on carcass traits and the carcasses of pigs fed canola meal and oil did not differ from those of pigs fed whole canola seed. Castrates had a significantly lower dressing percentage, lower estimated lean yield but greater loin fat depth than gilts (p<0.05). The results of this experiment indicate that peas in combination with canola seed or canola meal are an acceptable alternative to soybean meal as a protein supplement for use in growing-finishing swine diets. Extrusion did not appear to have any beneficial effects on the nutritional value of the canola seed-pea blend as nutrient digestibility, growth performance and carcass traits were similar for pigs fed the unextruded blend of peas and canola seed compared with the extruded product. Since the process adds to the cost of the raw products, its use is unlikely to be economical.

• Journal of Animal Science and Technology
• /
• v.65 no.3
• /
• pp.535-549
• /
• 2023

This study was to investigate the effects of different phytogenic feed additives (PFA) dosage levels in growing- finishing pigs stressed by high stocking density. A total of 72 mix sexed 12 weeks growing pigs ([Landrace × Yorkshire] × Duroc) with initial body weight (BW) of 49.28 ± 4.58 kg were used for 8 weeks. There were 3 replicate pens in each treatment group, with 3 pigs per pen. The dietary treatment groups consisted of basal diets in animal welfare density (negative control [NC]), basal diet in high stocking density (positive control [PC]), PC + 0.04% essential oil (ES1), PC + 0.08% essential oil (ES2), PC + 0.10% bitter citrus extract & essential oil (CES1), PC + 0.20% bitter citrus extract & essential oil (CES2), PC + 0.05% grape pomace extract (GP1), PC + 0.10% grape pomace extract (GP2). The reduction of space allowance decreased (p < 0.05) average daily gain, feed efficiency, and digestibility of dry matter, crude protein, and gross energy. Also, the fecal score of PC groups increased (p < 0.05) compared with other groups. Basic behaviors (feed intake, standing, lying) were inactive (p < 0.05) and singularity behavior (biting) was increased (p < 0.10) under high stocking density. There was no difference in blood profile. However, the supplementation of PFA alleviated the negative effects such as reduced growth performance, nutrient digestibility, and some increasing stress indicators in th blood (cortisol) and animal behavior (biting). In conclusion, the negative effect of high stocking density was most effectively mitigated by the normal dosage of the mixture of bitter citrus extract and essential oil additive (CES1).

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.2
• /
• pp.200-208
• /
• 2003

The purpose of this study is to propose scientific data and to develop complex\ulcornermultifunctional fibers by applying microcapsules containing rosewood oil on wool fabric. Polyurea was used as wall material of microcapsules. The parameters for adoptable condition are 20min of agitation time, 5000rpm of agitation speed, 4% of emulsifier concentration according to the observation with SEM and particle analyzer. The melting peak of microcapsules was shown to be 280$^{\circ}C$ The amount of released rosewood from microcapsules at 25$^{\circ}C$ was below 1 % and at 40% was below 3%. Therefore, polyurea microcapsules is capable of preserving rosewood oil for long self-life at normal temperature. Antimicrobial activity to dry cleaning and ironing cycle of wool fabric treated with microcapsules were maintained.

• Textile Coloration and Finishing
• /
• v.33 no.4
• /
• pp.327-337
• /
• 2021

The uniformly dispersed Aramid and Poly (phenylene benzobisoxazole) (PBO) in a variety of rubber was investigated. The mechanical properties of rubber were characterized by hardness, tensile strength, elongation at break, heat resistance, oil resistance, cold resistance, ozone resistance measurements. The 3mm Aramid chopped fiber better tensile strength than the other Chopped fiber. The Aramid of 3mm chopped fiber showed excellent reinforcing in rubber composite because of homogeneous dispersion. Consequently, the best 3mm Aramid chopped fiber and rubber improved the tensile strength and elongation at break of the composite. Also, 3mm Aramid chopped fiber improved the oil-resistant, ozone resistant and cold resistant.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.3
• /
• pp.404-412
• /
• 2016

We hypothesized that supplementing finishing diets with palm oil would promote adipogenic gene expression and stearoyl-CoA desaturase (SCD) gene expression in subcutaneous (s.c.) and intramuscular (i.m.) adipose tissues of feedlot steers. Eighteen Angus and Angus crossbred steers were assigned to three groups of 6 steers and fed a basal diet (control), with 3% palm oil, or with 3% soybean oil, for 70 d, top-dressed daily. Tailhead s.c. adipose tissue was obtained by biopsy at 14 d before the initiation of dietary treatments and at 35 d of dietary treatments. At slaughter, after 70 d of dietary treatment, tailhead s.c. adipose tissue and i.m. adipose tissue were obtained from the longissimus thoracis muscle. Palm oil increased plasma palmitic acid and soybean oil increased plasma linoleic acid and ${\alpha}$-linolenic acid relative to the initial sampling time. Expression of AMP-activated protein kinase alpha ($AMPK{\alpha}$) and peroxisome proliferator-activated receptor gamma ($PPAR{\gamma}$) increased between the initial and intermediate biopsies and declined thereafter (p<0.03). SCD gene expression did not change between the initial and intermediate biopsies but declined by over 75% by the final period (p = 0.04), and G-coupled protein receptor 43 (GPR43) gene expression was unaffected by diet or time on trial. Soybean oil decreased (p = 0.01) $PPAR{\gamma}$ gene expression at the intermediate sample time. At the terminal sample time, $PPAR{\gamma}$ and SCD gene expression was less in i.m. adipose tissue than in s.c. adipose tissue (p<0.05). $AMPK{\alpha}$ gene expression was less in s.c. adipose tissue of palm oil-fed steers than in control steers (p = 0.04) and CCAAT enhancer binding protein-beta ($CEBP{\beta}$) gene expression was less in s.c. and i.m. adipose tissues of palm oil-fed steers than in soybean oil-fed steers (p<0.03). Soybean oil decreased SCD gene expression in s.c. adipose tissue (p = 0.05); SCD gene expression in palm oil-fed steers was intermediate between control and soybean oil-fed steers. Contrary to our original hypothesis, palm oil did not promote adipogenic gene expression in s.c. and i.m. adipose tissue.

• Textile Coloration and Finishing
• /
• v.24 no.3
• /
• pp.173-179
• /
• 2012

Silk fabric treated with fluorocarbon resins (Asahi Guard AG-7005 and AG-E061) were washed and subsequently heat treated varying the washing cycles and the temperature. After the processing, the water and oil repellencies, and contact angle to water were evaluated. The water and oil repellencies decreased by the washing and recovered by following heat treatment. Also ESCA measurement was carried out to investigate the surface chemical composition of the treated fiber. The $F_1s$ intensity of the treated fabric decreased by the washing and recovered by the subsequent heat treatment. On the other hand, the $O_1s$ intensity increased by the washing and decreased by following heat treatment. From the results, it is clear that change of the water and oil repellencies of the silk fabric treated with fluorocarbon resin occurred by the washing and subsequent heat treatment. Considering a change of the water repellency of the silk fabric treated with fluorocarbon resin, it seems likely that the fluoroalkyl group of the fluorocarbon resin rotates from surface to inside of the fiber by the washing to adapt to the hydrophilic circumstance, and the orientation of the fluoroalkyl groups of the resin disturbed by the washing recovers the orientation to the fiber surface after the subsequent heat treatment.

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.3
• /
• pp.30-37
• /
• 2006

The present study examined the formaldehyde (HCOH) emission characteristic of various wood-based panel used in interior design, and measured changes in formaldehyde emission when a number of VOC reduction methods were applied. Formaldehyde emission showed a clear tendency of increase with the rise of temperature, and the concentration of formaldehyde emitted changed according to the preprocessing condition before measuring. Formaldehyde emission from wood board after bake out treatment was lower than that of the control group. When specimens were coated with urethane, cashew, water, oil stain, they generally showed the decrease of formaldehyde emission, although varying according to finishing material, and when edge sealing was applied the decrease became significant. $TiO_2$ coating was more effective in decreasing formaldehyde under ultraviolet lamps than under ordinary lamps. When the irradiation of ultraviolet lamps gets longer, formaldehyde emission decreased.

• Journal of the KSME
• /
• v.31 no.4
• /
• pp.389-400
• /
• 1991

압정가공은 열간압정과 냉간압정으로 크게 나눌 수 있으며, 압정기와 피압정재의 종류에 따라 서도 분류한다. 열간압정에서는 알루미늄과 알루미늄합금을 제외하고는 종래에 오직 물만이 냉각겸 윤활제로 사용되어 왔다. 그러나 근년에 와서 열간압정에서도 윤활유를 사용하게 됨으 로서 롤(roll)의 수명연장, 전력소비량의 저감 및 사상(finishing) 강판의 표면품질향상등에 극히 유효하다는 것을 인식하게 되었다. 한편 냉각압정에서는 압정유를 사용해 온 것이 100년 가까이 되는 역사가 있고, 특히 과거 십 수년간에는 상당히 광범위하게 연구가 이루어져서, 많은 실적을 갖게 되었다. 예컨대, 석도원판으로 대표되는 박판압정에 있어서는 고속고압하에서 판의 형상 및 표면정쟁성 향상은 물론이고 저온(에너지 절감, 작업성 개선) 저농도사용(원단위감소)이 이루어 지고, 나아가 장수명(액의 오염이 적은 것)의 압정유가 개발되었다. 또한 마대강 압정에 있어 서는 고윤활이면서도 ECL(electric cleaning line)의 성략도 가능한 압정유 즉 밀크린시트(mill clean sheet) 압정유의 연구도 활발히 진행되고 있다. 압정유의 역할을 살펴보면 열간 또는 냉 간을 불문하고, 롤과 재료간의 감마작용이 주가 되지만 기타 실용적으로는 (1)냉각성 (2)판의 끝맺음(finishing)성 (3)선정선 (4)방장성,비부식성 (5) 내노화성 (6) 오일.스테인(oil stain) (7) 급 유성 (8)액관리성 (9)비수처리성 10) 안전위생 (11)경제성 등을 열거할 수 있다.

• Textile Coloration and Finishing
• /
• v.17 no.6 s.85
• /
• pp.42-50
• /
• 2005

Silk fabrics are widely used as high quality cloth, interior, quilting and bedding materials because of having excellent touch, drape, resilience and low specific gravity characteristics. But, many waste silk materials are produced during the reeling, spinning, weaving, dyeing and finishing processes. From this fact, the recycle of waste silks is interested in studying for the application of industrial textile materials such as filter, oil absorbent and wound protector. Thus, this research has surveyed the decolorizing and carding characteristics in order to recycle the colored waste silk materials. As the results, the carding condition of waste silk fabrics was optimized with different fiber lengths and curding passage. In addition, the fiber failure mechanism from the wasted silk microdamage caused by carding process was investigated. Also it was found that longitudinal and transverse cracks, abrasion and pilling were formed on the surface of wasted silk fibers.