• Journal of Integrative Natural Science
• /
• v.5 no.1
• /
• pp.13-17
• /
• 2012

Changes of Fabry-Perot fringe patterns in porous silicon during etching process has been investigated. Four porous silicon samples were prepared with four different etch currents: (a) 10 $mA/cm^2$, (b) 30 $mA/cm^2$, (c) 50 $mA/cm^2$, (d) 100 $mA/cm^2$, respectively. Optical characterization of Fabry-Perot fringe pattern on porous silicon was achieved by Ocean optics 2000 spectrometer. The change of Fabry-Perot fringes was monitored and measured during the etching process. Fabry-Perot fringes pattern start to form after couple of minutes. As the etching time increased, more reflection peaks were observed. Its full width at half maximum (FWHM) decreased rapidly when the etching time increased.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.24 no.1
• /
• pp.10-15
• /
• 2012

Wave characteristics in the presence of energy damping are investigated using the linear shallow water equations. To get the phase and energy velocities, geometric optics approach is used and then these values are validated through numerical experiments. Energy damping affects wave height, phase and energy velocities which result in wave transformation. When the complex wavenumber is used by the Eulerian approach, it is found that the phase velocity decreases as the damping increases while the energy velocity increases showing higher values than the phase velocity. When the complex angular frequency is used by the Lagrangian approach, the energy-damping wave group is found to propagate in the energy velocity. The energy velocity is found to affect shoaling and refraction coefficient which is verified through numerical experiments for waves on a plane slope.

• Journal of Ocean Engineering and Technology
• /
• v.32 no.5
• /
• pp.402-409
• /
• 2018

This paper describes the plan and procedure of a development test and evaluation that will be performed to verify the performance and technology of multi-mission unmanned surface vehicles (MMUSVs). In order to verify the design requirement of MMUSVs, we designed and manufactured the common platform of MMUSVs, which have an overall length of8.4 m, a displacement of 3,100 kg, and a speed of more than35 kts. The platform is equipped with several sub-systems, including radar and an EOTS/IRS. The EOTS/IRS, along with the search radar, is used for effective detection, identification, and targeting. The core technologies of MMUSV for DT&E will be investigated. The common platform design technologies, remote operating and control system technologies, autonomous navigation technologies, and unmanned operational technology of sensors and equipment will be studied for the development of the MMUSV's core technologies. The system will be able to make precise observations and track targets both manually and automatically during day and night conditions. Currently, the verification tests for each of the technologies and for the integrated system are in the pipeline for DT&E, which will be performed next year. Also, software reliability and life tests will be performed.

• Journal of the Korean earth science society
• /
• v.38 no.7
• /
• pp.535-545
• /
• 2017

Maritime accidents around the Korean Peninsula are increasing, and the ship detection research using remote sensing data is consequently becoming increasingly important. This study presented a new ship detection algorithm using hyperspectral images that provide the spectral information of several hundred channels in the ship detection field, which depends on high resolution optical imagery. We applied a spectral matching algorithm between the reflection spectrum of the ship deck obtained from two field observations and the ship and seawater spectrum of the hyperspectral sensor of an airborne visible/infrared imaging spectrometer. A total of five detection algorithms were used, namely spectral distance similarity (SDS), spectral correlation similarity (SCS), spectral similarity value (SSV), spectral angle mapper (SAM), and spectral information divergence (SID). SDS showed an error in the detection of seawater inside the ship, and SAM showed a clear classification result with a difference between ship and seawater of approximately 1.8 times. Additionally, the present study classified the vessels included in hyperspectral images by presenting the adaptive thresholds of each technique. As a result, SAM and SID showed superior ship detection abilities compared to those of other detection algorithms.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.219-219
• /
• 1999

플라즈마 이온 주입은 진공 chamber 내에 주입하려는 이온이 포함된 플라즈마를 발생시킨 후 처리하고자 하는 시편에 negative high voltage pulse를 인가함으로써 시편 주위에 형성되어 있는 이온들을 시편에 주입하는 방법이다. 이러한 플라즈마 이온 주입 방법은 금속의 내마모성, 내부식성, 강도 및 경도를 증가시키고, 고분자 화합물의 표면 개질에 있어서 친수성 또는 소수성과 같은 표면 처리를 쉽고 간단하게 처리할 수 있다. 그리고 반도체 공정의 shallow junction doping을 효과적으로 처리할 수 있으며 특히, 대면적의 시편에 균일하게 이온을 주입할 수 있다. 플라즈마 이온 주입 방법에서 중요한 요소는 dose, 즉 이온 주입한 양과 처리하려는 시편에 주입되는 이온의 에너지이다. 여기서, 플라즈마내에 생성된 이온들의 비율을 정확히 안다면 시편에 주입되는 이온의 양과 주입되는 이온의 에너지를 충분히 예견할 수 있다. 질소 플라즈마의 경우에는 N+와 N2+가 생성되므로, 시편에 주입된 질소 이온의 실질적인 이온당 질소 원자수는 1$\times$N+% + 2$\times$N+%가 되고, N2+의 경우는 N+ 주입 에너지의 1/2 로 시편내에 주입되게 된다. 또한 질소 플라즈마의 경우 N2+ 이온이 상대적으로 N+이온보다 많다면 N+가 많은 경우보다 이온 주입 깊이는 얕아지게 된다. 본 실험에서는 Dycor M-100 residual gas analyzer와 potical emission spectrometer (Ocean Optics SQ 2000)를 사용하여 압력과 RF power를 변화시키며 플라즈마내에 생성되어지는 질소 이온의 비율을 측정하였다. 또한 Langmuir probe를 이용하여 속도차에 의한 각 이온들의 존재비율을 계산하였다. 여기에서 질소 가스의 압력이 낮을수록 N+보다 N2+의 존재비율이 높음을 보였다. 이것은 압력이 낮은 영역에서 일반적으로 전자의 평균온도가 높기 때문으로 여겨진다.

• Journal of Sensor Science and Technology
• /
• v.15 no.6
• /
• pp.391-396
• /
• 2006

Free-standing multilayer distributed Bragg reflectors (DBR) porous silicon dielectric mirrors, prepared by electrochemical etching of crystalline silicon using square wave currents are treated with polystyrene to produce flexible, stable composite materials in which the porous silicon matrix is covered with caffeine-impregnated polystyrene. Optically encoded DBR PSi/polystyrene composite films retain the optical reflectivity. Optical characteristics of DBR PSi/polystyrene composite films are stable and robust for 2 hrs in a pH=7 aqueous buffer solution. The appearance of caffeine and change of DBR peak were simultaneously measured by UV-vis spectrometer and Ocean optics 2000 spectrometer, respectively.

• Journal of Integrative Natural Science
• /
• v.3 no.2
• /
• pp.78-83
• /
• 2010

DBR/Host dual porous silicons containing DBR and host structure were prepared and their optical properties were characterized using Ocean Optics spectrometer. In this dual porous silicon, single porous silicon layer was used as host layer for possible biomolecule and drug materials and DBR porous silicon layer was used for signal transduction due to the recognition of molecules. Optical reflection spectrum of dual porous silicon displayed only DBR reflection but Fabry-Perot fringe pattern. DBR reflection band of dual porous silicon shifted to the shorter wavelength as the etching time of host layer increased. Cross-sectional FE-SEM image of dual porous silicon displayed a thickness of about 20 micrometer for DBR porous silicon layer. Developed etching technology could be useful to prepare DBR porous silicon which exhibited specific reflection resonance at the required wavelength and to provide an label-free biosensors and drug delivery materials.

• Korean Journal of Optics and Photonics
• /
• v.19 no.1
• /
• pp.68-72
• /
• 2008

Fiber-optic strain sensors based on Bragg reflection gratings produce the change of reflection spectrum when an external stress is applied on the sensor. To measure the Bragg reflection wavelength in high speed, an arrayed waveguide grating device is incorporated in this work. By monitoring the output power from each channel of the AWG, the peak wavelength corresponding to the applied strain could be obtained. To enhance the accuracy of the AWG wavelength interrogation system, a chirped fiber Bragg grating with a 3-dB bandwith of 5.4 nm is utilized. The high-speed response of the proposed system is demonstrated by measuring a fast varying strain produced by the damped oscillation of a cantilever. An oscillation frequency of 17.8 Hz and a damping time constant of 0.96 second are obtained in this measurement.

• Korean Journal of Agricultural Science
• /
• v.40 no.2
• /
• pp.163-167
• /
• 2013

Objective of the study was to compare reflectance spectrum in the blade and the vein parts of cabbage and kale leaves. A total 6 cabbage and kale leaves were taken from a plant factory in Chungnam National University, Korea. Spectra data were collected with a UV/VIS/NIR spectrometer (model: USB2000, Ocean Optics, FL, USA) in the wavelength region of 190 - 1130 nm. Median filter smoothing method was selected to preprocess the obtained spectra data. We computed reflectance difference by subtraction of averaged spectrum from individual spectrum. To estimate correlation at different parts of cabbage and kale leaves, cross - correlation method was used. Differences between cabbage and kale leaves are clearly manifested in the green, red and near - infrared ranges. The percent reflectance of cabbage leaves in the NIR wavelength band was higher than that of kale leaves. Reflectance in the blade part was higher than in the vein part by 18%. Reflectance difference in the different parts of cabbage and kale leaves were clear in all of the wavelength bands. Standard deviation of reflectance difference in the vein part was greater for kale, while the value in the blade part was greater for cabbage leaves. Standard deviation of cross - correlation increased from 0.092 in the first sensor (UV/VIS) and 0.007 in the second sensor (NIR) to 0.099 and 0.015, respectively.

• Journal of the Korean earth science society
• /
• v.42 no.6
• /
• pp.623-631
• /
• 2021

The increased transport of marine hazardous and noxious substances (HNS) has resulted in frequent HNS spill accidents domestically and internationally. There are about 6,000 species of HNS internationally, and most of them have toxic properties. When an accidental HNS spill occurs, it can destroys the marine ecosystem and can damage life and property due to explosion and fire. Constructing a spectral library of HNS according to wavelength and developing a detection algorithm would help prepare for accidents. In this study, a ground HNS spill experiment was conducted in France. The toluene spectrum was determined through hyperspectral sensor measurements. HNS present in the hyperspectral images were detected by applying the spectral mixture algorithm. Preprocessing principal component analysis (PCA) removed noise and performed dimensional compression. The endmember spectra of toluene and seawater were extracted through the N-FINDR technique. By calculating the abundance fraction of toluene and seawater based on the spectrum, the detection accuracy of HNS in all pixels was presented as a probability. The probability was compared with radiance images at a wavelength of 418.15 nm to select abundance fractions with maximum detection accuracy. The accuracy exceeded 99% at a ratio of approximately 42%. Response to marine spills of HNS are presently impeded by the restricted access to the site because of high risk of exposure to toxic compounds. The present experimental and detection results could help estimate the area of contamination with HNS based on hyperspectral remote sensing.