• 제목/요약/키워드: occupational classification

검색결과 276건 처리시간 0.021초

뇌졸중환자의 일상생활활동의 만족과 사회적응 능력 증진 사례연구 (A Case Study on the Improvement of Daily Living Activities, Satisfaction and Social Adaptation Performance Among Stroke Patients)

  • 김명섭;김정자
    • 한국임상보건과학회지
    • /
    • 제5권3호
    • /
    • pp.973-980
    • /
    • 2017
  • Purpose. To understand the effectiveness of training programs to improve the daily living activities and social adaption abilities of stroke patients. Methods. The participant included 1 stroke patient in Jeonbuk, from March to August 2016. The test tools used was the Canadian occupational performance measurement, International classification of function, disability and health co-resets. After applying the training program, I compared the daily life satisfaction and social adaption abilities. Results. According to this study, both daily life satisfaction and social adaption abilities improved. Conclusion. In conclusion, after an exercise program, self- help program, and underwater exercise programs, daily life satisfaction and social adaptation levels were improved. Therefore, the programs that apply to stroke patients could be found to be effective.

클라우드 기반의 스마트 직업 매칭 서비스 Catch Job 구현 (An Implementation of Smart Job Matching System Catch Job Based on Cloud System)

  • 윤경섭;김동현;김정태
    • 한국컴퓨터정보학회:학술대회논문집
    • /
    • 한국컴퓨터정보학회 2015년도 제51차 동계학술대회논문집 23권1호
    • /
    • pp.143-145
    • /
    • 2015
  • 본 논문은 대기업에 편중된 구직 상황을 해결하기 위해 대학교의 학생 정보를 통해 중소기업과의 취업으로 연계하는 스마트 매칭 시스템의 설계를 제안한다. 기존 취업 포탈 사이트 에서는 업종과 직종을 직접 찾아들어가야 하는 매칭 시스템을 제공하고 있다. 이 문제를 해결하기 위해 대학교 DB에 있는 학생 정보를 직업들과 매칭하여 주는 스마트 매칭 시스템의 개발을 목적으로 한다. 따라서 제안한 스마트 매칭 시스템은 업종과 직종을 찾아 들어가야 하는 기존에 시스템을 로그인만 하면 바로 학과 정보, 지역 정보에 맞는 채용 공고를 자동으로 보여주는 방식으로 변경하여 대학생과 중소기업 간의 취업률을 높일 것으로 예측한다.

  • PDF

재사용 작업대 성능시험을 통한 안전성 검토 (A Study on the Safety of Reuse Work Plate by Performance Test)

  • 최진우;최돈흥;고성석
    • 한국안전학회지
    • /
    • 제26권3호
    • /
    • pp.43-46
    • /
    • 2011
  • The work plate in a construction sites is a frequent cause of falling. But the bulk of the work plates lent to the construction site are handled carelessly by workers. There is general concern about performance declining by repetitive use. However, there is not a accurate guide, research and study on reuse work plate. This study was conducted in order to judge the classification guide to reuse work plate and measure the performance of classified reuse work plates. It is the result that even the A-grade plates classified to be in good shape by workers are below the performance standard. This means that the guide and classification are ineffective.

산업안전보건 분야의 UN 국제적 화학물질관리에 대한 전략적 접근(SAICM) 이행에 관한 연구 (A study on the implementation of UN SAICM in the occupational safety and health)

  • 이권섭;이혜진;이종한;양정선
    • 한국산업보건학회지
    • /
    • 제20권4호
    • /
    • pp.282-294
    • /
    • 2010
  • The purpose of SAICM (Strategic Approach to International Chemicals Management) is to minimize the health and environmental hazards from the production and the consumption of chemicals by improving the chemicals management capability of developing countries and implementing a system of the risk assessment and the management based on the precautionary principle until 2020. To achieve this purpose, the UN has prescribed the principles, objectives and establishment of an action plan for the chemicals management strategy which must be carried out at international, local, and national levels, and requested the implementation of the Global Plan of Action (GPA) comprising of 273 recommendations in 36 work areas. SAICM is currently based on voluntary participation, but is expected to become the basic framework of international order in relation to chemicals management in the future. This study aims to analyze the practice in the occupational safety and health area relating to implement 273 recommendations of the GPA, and propose complementary measures for the system in order to provide political advices for establishing future plans to manage industrial chemicals. Twenty three areas of total 36 work areas and 161 items of 273 recommendations have relevance to occupational safety and health areas. We have found that, as a national implementation level, 157 of 161 industrial safety and health items are being implemented at a satisfactory level in regard to the implementation of the GPA, while 4 items, including the ratification of the ILO Conventions 170, 174, 184, and support for GHS (Globally Harmonized System of Classification and Labeling of chemicals) implementation of developing countries, require additional complementary measures for the system and operation.

산림작업재해에 대한 기인물분석과 작업특성을 고려한 요인분석의 비교 (Comparison of Analysis of Original Cause Material and Factors Considering Workplace Characteristics on Occupational Injuries and Diseases in Forestry)

  • 김진현
    • 한국안전학회지
    • /
    • 제26권5호
    • /
    • pp.110-117
    • /
    • 2011
  • The paper tries to understand the other side of characteristics on occupational injuries and diseases in forestry. Occupational injuries and diseases in forestry seems to be greatly influenced by the environmental characteristics of the mountain district and individual's ability of workers. A traditional method on the analysis of occupational injuries and diseases data may show that the main cause of occupational injuries and diseases is the material factors significantly. To identify the other side of occupational injuries and diseases in forestry, the occupational injuries and diseases data of 3,091 workers in forestry was analyzed. The data in forestry, 2009 shows certain characteristics among the recent occupational injuries and diseases data. The first step is to classify the data according to standard of classification of original cause materials. Material factors are 72.3% and human factors (included managerial factors) and environmental factors are 27.0%. The next step is to reclassify the first step data by using the concept of influence factors which caused and influenced occupational injuries and diseases. The result is that material factors are 2.4%, human factors(included managerial factors) and environmental factors are 97.0%. Also, an aging degree of workers in forestry is higher than other categories of business. It is true that an aging degree of injured or diseased workers in forestry is higher than that of other categories of business. However, relevance with increase of occupational injuries and diseases could not be explained. An injury and disease rate in forestry is remarkably increased recently than other categories of business. One of the reason why an injury and disease rate increased remarkably in 2009 could be considered as the increase of the number of workers and related budget. Therefore, this study proposes important measures or means to prevent occupational injuries and diseases in forestry.

Detection and Classification of Bearing Flaking Defects by Using Kullback Discrimination Information (KDI)

  • Kim, Tae-Gu;Takabumi Fukuda;Hisaji Shimizu
    • International Journal of Safety
    • /
    • 제1권1호
    • /
    • pp.28-35
    • /
    • 2002
  • Kullback Discrimination Information (KDI) is one of the pattern recognition methods. KDI defined as a measure of the mutual dissimilarity computed between two time series was studied for detection and classification of bearing flaking on outer-race and inner-races. To model the damages, the bearings in normal condition, outer-race flaking condition and inner-races flaking condition were provided. The vibration sensor was attached by the bearing housing. This produced the total 25 pieces of data each condition, and we chose the standard data and measure of distance between standard and tested data. It is difficult to detect the flaking because similar pulses come out when balls pass the defection point. The detection and classification method for inner and outer races are defected by KDI and nearest neighbor classification rule is proposed and its high performance is also shown.

기어의 이상검지 및 진단에 관한 연구 -Wavelet Transform해석과 KDI의 비교- (A Study on Fault Detection and Diagnosis of Gear Damages - A Comparison between Wavelet Transform Analysis and Kullback Discrimination Information -)

  • 김태구;김광일
    • 한국안전학회지
    • /
    • 제15권2호
    • /
    • pp.1-7
    • /
    • 2000
  • This paper presents the approach involving fault detection and diagnosis of gears using pattern recognition and Wavelet transform. It describes result of the comparison between KDI (Kullback Discrimination Information) with the nearest neighbor classification rule as one of pattern recognition methods and Wavelet transform to know a way to detect and diagnosis of gear damages experimentally. To model the damages 1) Normal (no defect), 2) one tooth is worn out, 3) All teeth faces are worn out 4) One tooth is broken. The vibration sensor was attached on the bearing housing. This produced the total time history data that is 20 pieces of each condition. We chose the standard data and measure distance between standard and tested data. In Wavelet transform analysis method, the time series data of magnitude in specified frequency (rotary and mesh frequency) were earned. As a result, the monitoring system using Wavelet transform method and KDI with nearest neighbor classification rule successfully detected and classified the damages from the experimental data.

  • PDF

남성정장의 의복단서와 관찰자의 자기모니터링이 직업적합성 지각에 미치는 영향 (The Effect of Clothing Cues and Perceiver's Self-Monitoring on Perception of Occupational Suitability-)

  • 고애란
    • 대한가정학회지
    • /
    • 제33권1호
    • /
    • pp.211-222
    • /
    • 1995
  • The purpose of this study was to investigate(1) the effects of clothing cues of 20s young man in business suits on the perception of occupational suitability in an office setting and (2) the effect of Perceiver's self-monitoring and sex on the perception of occupational suitability formed by the function of clothing cues. The experimental design of this study was between-subjects 23 factorial design. The experimental materials developed for the study were a set of stimuli and a response scale. The stimuli consisted of 8 color photographs of a young man wearing business suits which were manipulated at two levels for each of three clothing cues (suit color, suit style, necktie color). Each one of eight sub-samples included 14 subjects from 2 perceiver groups by sex. The questionaires used to measure perceivers' responses to the stimuli were constructed in 12 five-point likert scale representing occupational suitability and self-Monitoring was measured by the self-Monitoring Scale by Gangestad adn Snyder. The subjects consisted of 224 male and female college students in Seoul. The data was processed by ANOVA and MCA(Multiple Classification Analysis). The result were as follows: (1) The Clothing cues of young man in business suits(suit color, suit style) partially influenced the occupational suitability. (2) The perception of occupational suitability formed by the clothing cues of a young man in business suits was partially influenced by the perceiver's self-monitoring and sex. Female high self-monitoring group were more affected by the clothing cues than any other groups.

  • PDF

화학물질에 대한 직업적 노출기준의 표기 항목 비교 (Comparison of Notation Items for Chemical Occupational Exposure Limits)

  • 피영규;김승원;하권철
    • 한국산업보건학회지
    • /
    • 제30권2호
    • /
    • pp.226-235
    • /
    • 2020
  • Objectives: This study was to investigate the signs and notations of skin absorption, carcinogenicity, germ cell mutagenicity, and reproductive toxicity in the occupational exposure limits of Korea and of other advanced countries. Methods: Information on occupational exposure limits in Korea, the USA, the UK, Germany, and Japan was investigated through the Internet, and items marked as carcinogenicity and skin absorption were compared by country. Results: Legal occupational exposure limits have been greatly simplified. However, in the case of HSE WEL, skin absorption, carcinogenicity classification, sensitization, and in the case of DFG MAK, skin absorption, carcinogenicity, pregnancy risk group, germ cell mutagenicity, airway and skin sensitization, photo contact sensitization, and vapor pressure were provided. Conclusions: It is desirable to indicate the carcinogenicity and skin absorption within permissible limits, and to include information on critical effects in chemical substance exposure limits to uphold the right to know of industrial hygienists and workers in Korea. It is also necessary to clarify the precautions, limitations and protections for skin absorption.

Cancer Incidence by Occupation in Korea: Longitudinal Analysis of a Nationwide Cohort

  • Lee, Hye-Eun;Zaitsu, Masayoshi;Kim, Eun-A;Kawachi, Ichiro
    • Safety and Health at Work
    • /
    • 제11권1호
    • /
    • pp.41-49
    • /
    • 2020
  • Background: We performed this study to investigate the inequalities in site-specific cancer incidences among workers across different occupations in Korea. Methods: Subjects included members of the national employment insurance. Incident cancers among 8,744,603 workers were followed from 1995 to 2007. Occupational groups were classified according to the Korean Standard Occupational Classification. Age-standardized incidence rate ratios were calculated. Results: We found that men in service/sales and blue-collar occupations had elevated rates of esophageal, liver, laryngeal, and lung cancer. Among women, service/sales workers had elevated incidences of cervical cancer. Male prostate cancer, female breast, corpus uteri, and ovarian cancers, as well as male and female colorectal, kidney, and thyroid cancer showed lower incidences among workers in lower socioeconomic occupations. Conclusions: Substantial differences in cancer incidences were found depending on occupation reflecting socioeconomic position, in the Korean working population. Cancer prevention policy should focus on addressing these socioeconomic inequalities.