• Journal of Sericultural and Entomological Science
• /
• no.11
• /
• pp.31-44
• /
• 1970

This experiment is conducted fer method cf bring to perfectly from defective cutting sapling 25 a production method of sapling which is to substitute for conventional graf ting. 1. In green wood cutting root comes out after 15 days of cutting with nearly straight development of root system; after 40 days of cutting, roots with total length of 1119 mms 43 roots, and 5.4 grs a root in total weight obtained. 2. Survival percentage of green wood cutting ranges between 56％ and 90％, average 73％ of that and it varies with natural characteristics of varietes. The results show variety of Gaeryang-Suban and Iljiroe with 80％ as a best ones in contrast with the variety of Shipyung. 3. The varietics or Gaeryang-Suban. Iljiroe, Suwon-Sang No.4, Rosang makes of much more roots than Yongchonchuwoo and Shipyung do. 4. Root ability made good number of roots commercially, when cutting is conducted soaking in 0.01 ％ NAA solution or 0.02％ NAA solution for 2 or 3 seconds as a chemical promoter. 5. Economical measures for increase of scion adapted 1) 2 scions from a green wood 50 cm long should be taken and basal pan of scion at its middle portion should be cut right under the node. 2) Scions below 50cm long may be used. Small scions or growthceased shoots h3ve also considerable root ability enough to be used. 3) Thus far, up 100,000 scions might be produced in 10 a. 6. We can find number of root increased, when cutting the opposite side in obliquity manner at 450. 7. When 110,000 saplings in 10 a. for the production of bring to perfectly from defective cutting sapling planted, quality of stocks does not go to bad condition without any obstacles in practical use. 8. Although the times or grafting delayed until middle of July, quality of sapling goes just a little down. Grafting may be conducted from early June to middle of July separately in several times, and the green wood of prunned mulberry in spring is available for a scion after end of June. 9. 10 grs weight of defective cutting sapling makes 95％ of complete sapling, otherwise 5 or 10 grs in weight of one becomes 80％ of complete sapling with its quality as similar as grafted one. 10. When the sapling planted, its branches should be cut, leaving 3 or 4 buds at the bottom of new branches. 11. In view of economical stand point, production cost of bring to perfectly from defective cutting sapling obtains 52％ of grafting cost.

• Journal of Environmental Health Sciences
• /
• v.40 no.6
• /
• pp.454-468
• /
• 2014

Objectives: This study was conducted to investigate the actual condition of the farm work environment and personal protective equipment as part of the effort to improve livestock work for the safety and health of poultry farmers and provide basic data for establishing plans to improve and develop personal protective equipment. Methods: For this purpose, a questionnaire survey on general information about stables, the poultry work environment, accidents, the wearing of work clothes and personal protective equipment, and the level of awareness related to personal protective equipment was conducted among 148 poultry farmers. Results: As a result, it was found that poultry workplace environment was exposed to such risks as fine dusts; organic dusts; poisonous gases; odorous substances; chicken excrement; contact with chickens, bacteria or viruses; and accidents related to machine operation. Thirteen percent of respondents suffered severe respiratory diseases, and the most frequently injured sites due to accidents were the hands (25.7%), knees (23.8%), arms (17.3%), and head (10.9%). The most frequent type of accident was collisions between the body and obstacles or machinery during movement (36.4%), followed by erroneous machine operation such as feeders and electric shocks (8.5%). Regarding the wearing of work clothes and personal protective equipment, 51.7% of the respondents wore worn-out clothing or everyday clothes, whereas only 32.0% wore work clothes. The percentage of farmers who wore proper protective equipment for the work environment during poultry work was 48.4%. The most frequently used type of protective equipment was boots (38.9%), followed by mask (36.7%), gloves (36.3%), appropriate work clothes (22.6%), quarantine clothes (17.6%), helmets (13.4%), and goggles (12.6%). The rate of wearing goggles was low because they were considered inconvenient and lowered work efficiency. Furthermore, they purchased everyday products available on the market for their personal protective equipment which were not appropriate for maintaining safety in an actual harmful environment and its consequent risks. As a result of the survey of the awareness level related to personal protective equipment, their levels of awareness of accidents and attitude proved to be average or higher, but the practice of wearing protective equipment and the level of knowledge and management of personal protective equipment were lower. Conclusion: This survey found that the wearing status of personal protective equipment among poultry farmers was insufficient even though they were exposed to risks. Most respondents were aware of the necessity of wearing personal protective equipment and of the potential for accidents, but they did not wear proper protective equipment. Their wearing rate was low due to a lack of knowledge about protective equipment, as well as the inconvenience of wearing it. Therefore there is a need to improve and develop specialized personal protective equipment for respiration, hands, and eyes, as well as work clothes that can protect farmers from major harmful matter that is generated in the poultry workplace. Based on the results of this investigation, we will conduct further studies on the required performance and design directions of personal protective equipment while collecting more objective data through field-oriented assessments.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.3
• /
• pp.265-270
• /
• 2014

Hearing-impaired people have difficulty in hearing, so it is also hard for them to learn letters that represent sound and text that conveys complex and abstract concepts. Therefore it has been natural choice for the hearing-impaired people to use sign language for communication, which employes facial expression, and hands and body motion. However, the major communication methods in daily life are text and speech, which are big obstacles for the hearing-impaired people to access information, to learn and make intellectual activities, and to get jobs. As delivering information via internet become common the hearing-impaired people are experiencing more difficulty in accessing information since internet represents information mostly in text forms. This intensifies unbalance of information accessibility. This paper reports web-based text-to-sign language translating system that helps web designer to use sign language in web page design. Since the system is web-based, if web designers are equipped with common computing environment for internet browsing, they can use the system. The web-based text-to-sign language system takes the format of bulletin board as user interface. When web designers write paragraphs and post them through the bulletin board to the translating server, the server translates the incoming text to sign language, animates with 3D avatar and records the animation in a MP4 file. The file addresses are fetched by the bulletin board and it enables web designers embed the translated sign language file into their web pages by using HTML5 or Javascript. Also we analyzed text used by web pages of public services, then figured out new words to the translating system, and added to improve translation. This addition is expected to encourage wide and easy acceptance of web pages for hearing-impaired people to public services.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.4
• /
• pp.422-429
• /
• 2006

The study aims to examine that regular leisure activity of the elderly has a beneficial effect to enhance their health condition. The elderly subjects of 164 (82 of elderly who do leisure and 82 of elderly who do not leisure) aged over 60 years in Suwon area were employed. Survey questionnaires were administered to investigate general characteristics, life style, mental status, dietary life and nutritional status. From the findings, the elderly who do leisure were highly educated, better in living status and higher employment rate. The mental status of the elderly without leisure activity was very much inferior to that of the elderly with leisure activity, representing higher prevalence rate of depression. Furthermore, the elderly who do not leisure showed higher drinking and smoking rates, irregular eating habits, poor teeth condition and chewing style as well as having eating obstacles. Mean caloric intake of both the elderly was also lower than that of RDA. The elderly who do not leisure have shown lower intakes in most of essential nutrients in contrast to the elderly who do leisure. In conclusion, the elderly with regular leisure activity seemed to have better life style and mental status, dietary life and nutritional status. Therefore, it is critically important to establish the health program combined with various leisure activity for the seniors to promote and energize the later years of life.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.4
• /
• pp.25-34
• /
• 2010

This study was conducted to develop evaluation indicators to improve athletic performance and operational management of golf courses and the results of the research are as follows. Through theoretical research and a preliminary professional survey, 15 on-going evaluations of golf course composition and operational management and 55 sub-evaluation indices were rejected while 10 on-going evaluations and 52 sub-evaluation indicators were reconfigured as final for environmental-friendliness, level of member services, level of human service of game personnel, difficulties of course, management level of the course, fairness of operational management, accessibility and location characteristic, traditions and ambiance of the golf club, quality of course, and course layout. When analyzing the important decision factors in golf course user preference evaluation indicators, the following contributed in the order of higher to lower contributions: the management level of the course, excellence of the course, level of human services for personnel, course layout and environmental-friendliness. When identifying the path coefficient of golf course evaluation indicators, the curvature of a hole and the length of the course had a causal effect on the 'course layout' section. Tournament facilities and various shot values had a causal relationship with 'excellence of the course', in the order of higher to lower, and convenience of waiting and fair allocation of reservations for 'fairness of operational management'. The history of the golf course and its environmental characteristics, history and culture of the region have relatively higher causal effects on 'traditions of the golf club' and geographical conditions on 'accessibility and location characteristics', pesticide and fertilizer usage and water pollution on 'environmental-friendliness', and member benefit and kindness of employees on 'level of member services'. The kindness and expertise of the game personnel had a relatively higher causal effect on the 'level of human services of game personnel', the location of tenning area, and location of OB and hazards on 'difficulties of course', and rough conditions and obstacles management on 'management level of the course'. There is a need to complete a systematic evaluation index system for golf course user preferences through future studies for a more detailed assessment, as well as a process to verify these evaluation indicators by application to domestic and international golf courses.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.3
• /
• pp.36-48
• /
• 2015

To complete various types of finish works with higher quality in much less time, TACT, which was mostly used for high-rise buildings, has been adapted to meet the needs for systematic schedule management in construction sites. However, the effectiveness of adapting TACT has not been shown as expected due to the different perspectives on productivity from both general contractor and subcontractors based on unforeseen conditions according to the types of site. Furthermore, not enough theoretical backgrounds, empirical data, and systematic approaches to solve the fundamental problems caused by each participants' different views on productivity has produced obstacles for establishing effective solutions. Therefore, this research aims to analyze the possible main reasons for having different point of views regarding productivity among various participants of residential building sites using TACT based on literature review, site survey, and interviews. Also, case study was conducted to propose obtainable productivity (OP) regression equation and productivity achievement ratio (PAR) with reduction factors (RFs) and actual productivity (AP) data from an actual construction site. The proposed outcome may assist general contractors converting output management with PPC to productivity management with actual data using PAR. On the other hand, subcontractors would be able to estimate theory-based maximum productivity of construction sites with TACT by using OP. The PAR will enhance the communication between general and sub-contractors for their decision making process. Finally, the main RFs derived from PAR could be used as essential keys for productivity management to increase the economical and operational effectiveness of the construction project.

• Journal of Korean Society of Forest Science
• /
• v.82 no.3
• /
• pp.221-226
• /
• 1993

Methods for shoot proliferation via pulse treatment onto the microshoots of Quercus acutissima, and ex vitro root induction using peat plug systems of the microshoots of 4 oak trees were described. Pulsing solution was prepared by the addition of BA and/or BA plus zeatin onto the aqueous WPM and sterilized distilled water. Using the solution, pulsing time was adjusted at different levels(0. 1, 2, 5. 9, and 24 hours). Although the effect of pulsing solution prepared by the addition of cytokinins onto the sterilized distilled water was slightly lower in shoot proliferation rate, a little higher in shoot elongation was observed compared with that of aqueous WPM. One hour of pulse treatment revealed best in shoot proliferation and its elongation, whereas the increment of pulsing time slightly suppressed the response. In addition, prolonged pulse time resulted high frequency of hyperhydric shoot appearance. Single treatment of BA was better in shoot proliferation than that of BA combination with zeatin, whereas the latter treatment usually showed rapid and healthy shoot growth. For ex vitro root induction using peat plug systems, black oaks(Q. acutissima and Q. variabilis) revealed excellent rootability compared with white oaks(Q. serrata and Q. mongolica). Shoot-tip necrosis of white oaks eras one of the big problems for survival. In this study, we discribed the effect of pulse treatment, successful ex vitro rooting system by the incorporation of peat plug, and the possibilities for the overcoming the obstacles on micropropagation of oaks.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.13 no.4
• /
• pp.176-184
• /
• 2011

Cold air on sloping surfaces flows down to the valley bottom in mountainous terrain at calm and clear nights. Based on the assumption that the cold air flow may be the same as the water flow, current models estimate temperature drop by regarding the cold air accumulation at a given location as the water-like free drainage. At a closed catchment whose outlet is blocked by man-made obstacles such as banks and roads, however, the water-like free drainage assumption is no longer valid because the cold air accumulates from the bottom first. We developed an empirical model to estimate quantitatively the effect of cold pool on nocturnal temperature in a closed catchment. In our model, a closed catchment is treated like a "vessel", and a digital elevation model (DEM) was used to calculate the maximum capacity of the cold pool formed in a closed catchment. We introduce a topographical variable named "shape factor", which is the ratio of the cold air accumulation potential across the whole catchment area to the maximum capacity of the cold pool to describe the relative size of temperature drop at a wider range of catchment shapes. The shape factor is then used to simulate the density profile of cold pool formed in a given catchment based on a hypsometric equation. The cold lake module was incorporated with the existing model (i.e., Chung et al., 2006), generating a new model and predicting distribution of minimum temperature over closed catchments. We applied this model to Akyang valley (i.e., a typical closed catchment of 53 $km^2$ area) in the southern skirt of Mt. Jiri National Park where 12 automated weather stations (AWS) are operational. The performance of the model was evaluated based on the feasibility of delineating the temperature pattern accurately at cold pool forming at night. Overall, the model's ability of simulating the spatial pattern of lower temperature were improved especially at the valley bottom, showing a similar pattern of the estimated temperature with that of thermal images obtained across the valley at dawn (0520 to 0600 local standard time) of 17 May 2011. Error in temperature estimation, calculated with the root mean square error using the 10 low-lying AWSs, was substantially decreased from $1.30^{\circ}C$ with the existing model to $0.71^{\circ}C$ with the new model. These results suggest the feasibility of the new method in predicting the site-specific freeze and frost warning at a closed catchment.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.3
• /
• pp.311-321
• /
• 2009

The Nation Geodetic Reference System which presents a consistent location standard used in creating a map or developing national land is defined and managed by the law in a nation. Each nation had used its own geodetic system created by astronomical surveying until recently, when Geodetic Reference System(World Geodetic Reference System) has been developed and used to progress in space and satellite geodetic technologies. Korea also amended its geodetic law in December 2001, converting its national geodetic system whose reference an oval figure is Bessel ellipsoid into the World Geodetic Reference System which uses GRS80 ellipsoid as reference ellipsoid. Accordingly, the National Geography Information Institute improved law and systems related to the change for the effective conversion from its national geodetic system into the World Geodetic Reference System. In addition National geographic information institute of the results of various studies is drawn to the World Geodetic Reference System for switching technology-met some of the institutional foundation Despite of accordance with formalities, National geographic information institute, Ministry of Land, Transport and Maritime Affairs and some local government of the World Geodetic Reference System, and local government has or has not spread in public institutions. Therefore, in order to promote the switch to the World Geodetic Reference System, it is required to analyze current technical and institutional problems and obstacles of the switch to the World Geodetic Reference System and to present the resolutions and to establish policy to achieve them. Accordingly, for the promotion of the switch to the World Geodetic Reference System, this study analyzed the results of previous studies, the current state of the switch to the World Geodetic Reference System and the problems of the switch, and then offered technological and institutional supplements. Furthermore, it standardized the subject and type of the conversion, defined the scope of the tasks of the National Geographic Information Institute and its related organizations, and presented the policy direction for the overall use of the World Geodetic Reference System by 2010.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.4
• /
• pp.375-382
• /
• 2020

As the 4th Industrial Revolution era in worldwide, interest in autonomous vehicles is increasing. but due to recent safety issues such as pedestrian accidents and car accidents, as a technical model for this, the demand for 3D HD maps (High Definition maps) is increasing in including lanes, road markings, road information, traffic lights and traffic signs etc. However, since some complementary points have been continuously raised according to demand, It is necessary to collect the opinions of institutions and companies utilizing HD maps and to improve HD maps. This study was conducted by utilizing the results of the contest for usability verification of HD Maps hosted by the National Geographic Information Institute and organized by the Spatial Information Industry Promotion Institute. For this study, we researched HD maps' layers and codes for HD maps object usability to improve HD maps, constructed HD maps object usability items accordingly, and contested usability verification of HD maps according to the items The contestants conducted verification and analyzed the results. As a result, the most frequently used code for each layer was the flat intersection, and the code showing the highest usage rate was a safety sign. In addition, the use rate of the sub-section and height obstacles was 16.67% and 8.88%, respectively, showing a low ratio. In order to utilize HD maps in the future, this study is expected to require research to continuously collect opinions from customers and improve data objects and data models that are actually needed by customers.