• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.3
• /
• pp.486-493
• /
• 2008

Safflower red colorants extracted by two solvents including the traditional ash solution and $K_{2}CO_{3}$ solution was used for dyeing cotton, ramie, viscose rayon, silk, wool, and nylon fabrics. The effects of extraction solvents on the reflectance, K/S value, and color properties of the dyed fabrics were investigated. Wash/dry cleaning and light colorfastness were evaluated. Reflectance curves of cotton, ramie, viscose rayon, and silk fabrics dyed with red colorants extracted by $K_{2}CO_{3}$ solution were similar, showing the maximum absorption at 520nm, to that of the dyed fabrics with red colorants extracted by ash solution. The reflectance curves of wool and nylon fabrics were different, showing the maximum absorption at 400nm. K/S values of dyed fabrics with red colorants extracted by $K_{2}CO_{3}$ solution were higher than that by ash solution with the exception of nylon. $L^{*},\;a^{*},\;b^{*}$, and $C^{*}$ of the dyed fabrics with red colorants extracted by $K_{2}CO_{3}$ solution were higher than that by ash solution except for $L^{*}$ of nylon and $b^{*}$ of viscose rayon. Color difference(${{\Delta}E}^*$) of the dyed fabrics between ash solution and $K_{2}CO_{3}$ solution increased in the order named as cotton, silk, ramie, viscose rayon, wool, and nylon. Regardless of extraction solvents, safflower red colorants produced RP color on cotton, ramie, and nylon, R color on viscose rayon and silk, and YR color on wool. Wash/dry cleaning fastness of the dyed fabrics was high above 3/4 rating but light fastness was very poor. It is considered that the use of $K_{2}CO_{3}$ solution instead of the traditional ash solution would be more effective in terms of color reproducibility and extraction process.

• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1577-1578
• /
• 1997

We have studied the effect of the rubbing fabric for liquid crystal alignment and pretilt angle generation in nematic liquid crystals (NLC), 4-cyano-4-n-penthylbiphenyl (5CB), on rubbed polyimide (PI) surfaces. The pretilt angle of 5CB for nylon and rayon fabric is larger than that of cotton fabric in weak rubbing on rubbed PI surfaces. We conclude that the pretilt angle of 5CB is strongly related to the rubbing fabrics on rubbed PI surfaces.

• Textile Coloration and Finishing
• /
• v.1 no.1
• /
• pp.19-25
• /
• 1989

In past, dye diffusion and dyeing rate in fibers have been emphasized in dyeing phenomena. However, in the light of the properties of colloids in the surface of disperse phase and dispersion, there exist specific characters such as adsorption or electric double layer, which seems to play important roles in determining the physiochemical properties in the dyeing system. Electrostatic bonding, hydrogen bonding and Van der Waals adsorption are common in dyeing as well as covalent bonding. Particularly, electrostatic bonding is premised on the existance of ionic radicals in fibers. The present study was aimed to clarify the electrokinetic phenomena of dyeing through the role of electric double layer by ion in amphoteric fibers with different ionic effects under different pH. Spectrophotometric analysis method was used to compare dyeing condition of surface, which can be detected by electrokinetic phenomena and the inner of fibers after deceleration of dyed fibers. Nylon and wool, the typical amphoteric fibers were dyed with monoazo acid dyes such as C.I. Acid Orange 20, and C.I. Acid Orange 10. Various combinations were prepared by combining pH, temperature and dye concentration, in order to generate streaming electric potential which were measured by microvolt meter and specific conductivity meter. The results were transformed to zeta potential by Helmholtz-Smoluchowski formular and to surface electric charge density by Suzawa formular, surface dye amount, and effective surface area of fibers. The amount of dyes of inner fibers were also measured by the Lambert-Beer’s law. The main results obtained are as follows. 1. By measuring zeta pontential, it was possible to detect the dyeing mechanism, surface charge density, surface dye amount and effective surface area concerning dye adsorption of the amphoteric fibers. 2. Zeta pontential increases in negative at low pH and high dye concentration in the process of dyeing. This implied that there existed ionic bond formation in the dyeing mechanism between acid dyes and amphoteric fibers. 3. Dibasic acid dye had little changing rate in zeta potential due to the difference in solubility of dye and in number of dissociated ions per dye molecule to bond with amino radicals of amphoteric fibers. The dye adsorption of mono basic acid dye was higher than that of dibasic acid dye. 4. The effective surface areas concerning dyeing were $6.3E+05\;cm^2/g$ in nylon, $1.6E+07\;cm^2/g$ in wool fiber being higher order of wool then nylon.

• Applied Chemistry for Engineering
• /
• v.24 no.4
• /
• pp.363-369
• /
• 2013

In this work, the effects of ozone treatments on mechanical interfacial properties of carbon fibers-reinforced nylon-6 matrix composites were investigated. The surface properties of ozone treated carbon fibers were studied by Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS). Mechanical interfacial properties of the composites were investigated using critical stress intensity factor ($K_{IC}$). The cross-section morphologies of ozone-treated carbon fiber/nylon-6 composites were observed by scanning electron microscope (SEM). As a result, $K_{IC}$ of the ozone-treated carbon fibers-reinforced composites showed higher values than those of as-received carbon fibers-reinforced composites due the enhanced $O_{1s}/C_{1s}$ ratio of the carbon fiber by the ozone treatments. This result concludes that the mechanical interfacial properties of nylon-6 matrix composites can be controlled by suitable ozone treatments on the carbon fibers.

• Journal of the Korean Home Economics Association
• /
• v.46 no.9
• /
• pp.1-6
• /
• 2008

The purpose of this study was to investigate the changes in the property of nylon fabrics dyed with safflower red and yellow colorants under Ultraviolet(UV)-light. For this purpose, nylon fabrics dyed with safflower red and yellow colorants were compared with each other after uv-light exposure in terms of K/S value, color changes(${\Delta}E$), morphology, and strength retention. K/S value rapidly decreased with increasing exposure time, but K/S value of the samples dyed with safflower red colorants decreased less than that of samples dyed with safflower yellow colorants. In color changes, as increasing exposure time, $L^*$ increased, $a^*$ decreased, $b^*$ increased, and so ${\Delta}E$ increased in samples dyed with safflower red colorants. In color changes, as increasing exposure time, $L^*$ increased, $a^*$ and $b^*$ decreased, and thereby ${\Delta}E$ increased in the samples dyed with safflower yellow colorants, indicating fading away by uv-light and changes of hue, value and chroma value. But the color change of samples dyed with safflower yellow colorants was less than that of samples dyed with safflower red colorants. SEM pictures showed a severe degradation by uv exposure, regardless of colorants type. Tensile strength slowly decreased until 14 days, and rapidly decreased until 28 days. Strength retention of the samples dyed with safflower yellow colorants was higher than that of the samples dyed with safflower red colorants.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.36 no.1
• /
• pp.45-53
• /
• 2000

To analyze the photodegradation mechanism of materials for fisheries facilities which stand for considerable time immediately under or even partly above the water surface, such as cage collar, cage net, stationary fishing gear, egc. after 900 hours exposure, weathering experiments on 3 kinds of netting twines like dyed polyethylene(PE) and nylon, and non-treated high strength PE(Hi-PE) were carried out by using xenon light source. The results obtained are as follows : It was observed by scanning electron micrograph(SEM) that a good protection by pigments was obtained in PE and nylon specimen, while crack was rapidly progressed at the surface of Hi-PE one owing to etching by UVR. There was a little increase in density resulting from reorientation of polymer chain, chain scission, etc. in Hi-PE specimen. A wide angle X-ray diffraction showed that 3 kinds of specimens had no fundamental changes in polymer crystalline structure considering each 2$\theta$ of diffraction peak. Remaining tenacity of netting twines was in order of PE, nylon, and Hi-PE after having been exposed to the effect of 900 hours. PE and nylon treated with stuffs were shown to be more resilient than non-treated Hi-PE as confirmed by SEM.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.2
• /
• pp.211-216
• /
• 2003

The objective of this study was to determine the degradability of cassava chip (CC), cassava waste (CW), yellow sweet potato (YP), white sweet potato (WP), purple sweet potato (PP), corn meal (CM), and rice bran (RB) using in situ technique. Two ruminally fistulated steers with an average weight of $303{\pm}10kg$ were used to determine in situ degradabilities of DM and OM. Seven feed sources were weighted in nylon bags ($38{\mu}m$ pore size) and incubated ruminally for 1, 2, 4, 6, 8, 12, 24, and 48 h. The results showed that asymptote (a+b) and effective degradability (ED) of DM of energy sources ranked from the highest to the lowest; CC, YP, WP, PP, RB, CW, and CM (99.3, 92.5; 97.6, 87.9; 97.5, 87.9; 97.2, 87.8; 87.5, 63.6; 78.6, 63.0 and 81.7; 59.3, respectively) and for OM asymptote (a+b) and effective degradability (ED) were similar to those of degradation of DM (99.4, 93.4; 98.8, 89.8; 98.5, 89.4; 98.4, 88.1; 92.4, 65.8; 85.1, 66.9 and 83.6, 63.3, respectively). It was concluded that disappearance characteristic of CC was the highest and it may potentially facilitate the achievement of optimal ruminal availability of energy: protein especially with NPN for microbial protein synthesis.

• Korean Journal of Rural Living Science
• /
• v.8 no.2
• /
• pp.73-81
• /
• 1997

Parsimon juice dyeing is the one of the most popular natural dyeing methods which have been done traditionally among the farmers. The clothes dyed with parsimon juice has several merits, that is, it become much more durable, cool, easy to wash and wear after dyeing and these merits are the reason why people likes to wear the parsimon juice dyeing clothes as work wear. Especially in Cheju province, parsimon juice clothes became a folk costume and many people still enjoy wearing it in the hot summer days. But one of the demerits of parsimon dyeing is that the possible period of dyeing is very short. So, if parsimon juice dyeing could be done with the preserved parsimon juice, it would be possible to enlength the period. With this idea, we compared the color and colorfastness of fabrics which were dyed with 4 kinds of parsimon juice. The experimental parsimon juice 96-8 was preserved during 13 months, 96-9 was 12 months, 97-8 was 1 month and 97-9 was not preserved one. The experimental fabrics were cotton, silk. nylon and polyester fabrics. The results were as follows ; 1. The colors of fabrics dyed with experimental parsimon juice 96-9, 97-8, 97-9 were yellow-red and dyeing states were good. But the colors of fabrics dyed with 96-8 were dark and the state were bad, because the color of experimental parsimon juice 96-8 was changed during preservation. 2. The best state of dyeing could see in the fabrics dyed with experimental parsimon juice 97-8, although that was preserved 1 month. 3. There were differences of color between experimental fabrics dyed with same juice and the colors were thicker in cotton and silk than in nylon and polyester fabrics. 4. During wetting and drying process, the color changes in fabrics dyed with no preserved one were more than in fabrics dyed with preserved ones. 5. The color fastness to the light of the dyed fabrics was over 4, to the acidic perspiration was 3~4 or 4~5, to the alkaline perspiration was 2, 3 or 3~4 and to the washing was 1~2. There was no significant difference in colorfastness between the 96-9 dyed fabrics and 97-9 dyed fabrics.

• Macromolecular Research
• /
• v.9 no.4
• /
• pp.238-246
• /
• 2001

Properties of ternary blends of nylon 6 (Ny6), a thermotropic liquid crystalline polymer (TLCP, poly(ester amide), 20 wt%) and a maleic anhydride grafted polypropylene (2 wt%) (MAPP) were studied under various processing conditions. TLCP was pre-blended with MAPP first and then the binary one blended again with Ny6. The processing temperature of the second mixing was varied. Thermal properties show the partial miscibility of the ternary blend. The morphology of the TLCP phase in the first blending shows mostly in the fibril bundle shape, but varies between droplets and oriented fibrils after the second processing. Some of TLCP phase lost the fibril morphology during the second processing stage. The morphology variation invokes the change in tensile properties. Low extrusion temperature (270$\^{C}$) provides more fibril shapes, which are associated with less deformation in the second stage. The processing temperature effect was more evident when the draw ratio was high. High drawing was applicable due to the stabilizing action of tile compatibilizer.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.15 no.1
• /
• pp.61-69
• /
• 1991

In order to investigate the comfort properties of aerobic wear with different materials, the physiological responses, subjective wear sensation and microclimate were measured. The experimental garment were all-in·one type with half·length sleeves made of cotton/ polyurethane and nylon/ polyhrethane fabrics. The conditions of the experimental room were controlled to maintain two type of environ- ments, i.e. $25{\pm}1^{\circ}C$, $60{\pm}5\%$ R. H. and $30{\pm}1^{\circ}C$, $70{\pm}5\%$ R.H., Air velocity was maintained at 0.25 misec all the time. The results are as follows; 1) At $25^{\circ}C$, mean skin temperature and comfort sensation were not significantly different among 2 types of materials. 2) At $30^{\circ}C$, aerobic wear made of cotton/polyurethane fibers showed better pleasant tactile sensation than that of nylon/polyurethane fibers. 3) Under both environmental conditions, microclimate of two types of aerobic wear was not significantly different. 4) Among several aspects of wear sensations, tactile sensation was the most powerful factor to differenciate material differences of aerobic wear.