• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.64-67
• /
• 2003

The authors have settled general modular design by analyzing related literatures, but general modular design are too massive to be applicable to all process devices. So, the common parts have to be selected, applied, and modified for the devices. We have chosen the dry pulverizing/mixing device for example. We have elected the target modules of this device such as flange, hinge, bolt, nut coupling. The remote assembling and disassembling possibilities of the selected modules have been analyzed from the viewpoints of visibility, interference, approach, weight and so on. We have presented final modular design proper to the target modules. The modular designs which have adopted the modular property been analyzed. The modular design points are comprised of common and unique points. Some points are common for several devices, such as bolt, flange and so on. Others are unique for each device, such as power transmission coupling. The experimental devices have been modified by these modular design points and the design drawings have been presented.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1994년도 봄 학술발표회 논문집
• /
• pp.33-37
• /
• 1994

When a bolt is tightened up to the range of plastic deformation, yielding is governed by the combined stresses due to the axial force developed in the bolt and the frictional torque developed on the thread in contact with the nut. Consideration is taken account of the fact that the unused portion of the thread has least sectional area being subject to initial yielding. Once yielding has taken place some strain hardening effect will result, Incremental stress-strain relations are used to treat the continued yielding, which is equivalent to treat continued yielding as if summing up the effects of thin walled cylinders subject to plastic deformation. M10 bolts of common and fine series thread are used for computational purposes. Variation of axial forces and frictional torques vs. the frictional coefficients tare presented together with other plots showing some characteristics of bolt under plastic deformation.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2003년도 생물공학의 동향(XII)
• /
• pp.121-125
• /
• 2003

Enzymatic polymerization of cardol derived from cashew nut shell liquid have been examined. t-Butyl alcohol aqueous systems showed high yield of polycardol when SBP was as biocatalyst. Compared other solvents, peroxidase actiyity was maintained stable, which was seemed major cause. Solvent aqueous system and concentration of hydrogen peroxide were found to have an influence on the yield and molecular weight distribution of polycardol under the reaction of enzymatic polymerization using peroxidase. The polymer was subjected to the hardening by methyl ethyl ketone peroxide and cobalt naphthenate catalyst, giving a crosslinked tough film. Polycardol was cured rapidly and the hardness increased with time. Finally, the pencil scratch hardness reached to 7H, which is enough hard for industrial uses.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.121-124
• /
• 2005

This paper was about experimental test properties by mechnical joint of CF1263/Epoxy Al honeycomb panels. In case of mechanical joint using screw, nut shall be secured over than minimize third screw pitch. In case of insert backsheet for increase of joint force, increase weight for assemble by screw pitch. In case of insert backsheet with CF1263/Epoxy, predominant save weight and minimazer of displacement by tensile weight moreover predominant strength. In case of mechanical joint by rivet, rivet of Monobolt has over-hole in hole of CF1263/Epoxy but rivet of PROTRUDING has predominant of mechanical joint.

• Food Quality and Culture
• /
• 제2권2호
• /
• pp.80-84
• /
• 2008

In this study, sixth grade school children in the Guri area were surveyed via questionnaire regarding their sociodemographic characteristics, snacking patterns, and intakes of different food groups and sugared snacks. Students with employed mothers had more frequent snacking events and were more dependent on store-purchased snacks compared to those having an unemployed mother. A high consumption of snack sugar was associated with a higher dietary diversity score. There was a positive relationship between snack sugar intake and the intakes of meat and dairy products and foods in the oil and nut group, respectively. A high snack sugar intake had a negative effect on fruit intake. Specific nutrient intake data will be required before conclusions can be made on whether nutrient imbalances are a concern in elementary school children having sweet snacks. Yet, the current data indicate that an increased snack sugar intake can decrease fruit intake, which could result in certain nutrient deficits. Specific dietary guidance may be necessary to address the snacking habits of elementary school children.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.367-371
• /
• 2005

Social noise survey on multiple residential noises such as nut impact, air-borne, bathroom, drainage and traffic noises was conducted to investigate major variables affecting the overall satisfaction for noise environment The effect of individual noise perception on the evaluation of the overall noise environment was investigated through a questionnaire survey on annoyance, disturbance and noise sensitivity. Auditory experiments was also undertaken to determine noise level according to the percent of satisfaction for individual noise source. As a result of survey, it was found that satisfaction for floor impact noise most greatly affects the overall satisfaction for noise environment and annoyance most greatly affects the satisfaction for individual noise sources. Result of auditory experiment showed that the noise level of floor impact noise by bang machine, airborne, drainage and traffic noise corresponding to 50% satisfaction is 44dB($L_{i,Fmax,AW}$) and 40dBA, respectively.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.578-582
• /
• 2007

In this paper, vibration modes and frequencies of a ring-type stacked piezoelectric actuator for a wire bonding transducer system are analyzed using FEM simulations. We implement experiments using a commercial product model of the actuator PZT module which consists of 6 layer ring-type PZT and 7 electrodes, combined bolts, nut and tinut. There are two main results: One is that FEM analysis should consider the effect the harmonic voltage input in order to meet the experimental results. The other is that the current wire bonder using exciting frequency of 136 kHz should be modified in order to improve the actuator and bonding performance because the actuator module has the main longitudinal mode of 145 kHz.

• 한국가구학회지
• /
• 제21권5호
• /
• pp.354-366
• /
• 2010

The modern unique woodworking furniture has been made in earnest from 50 years ago. Some oil from nut such as soybean, walnut and perilla, which is usually used in our common life, has been used as finishing material for the unique woodworking furniture. Recently, woodworking studio business among the whole furniture industry has grown gradually and many woodworkers uses various kinds of imported wood finishing oil. Many woodworkers use the imported finishing oil in the old ways instead of understanding the characters of the various kind of oil and It causes some serious problems in furniture finishing process. Therefore, this study aims at taking theoretical approach in wood finishing oil and presenting correct usage in understanding the types and characters of oil. Resultingly the new method of oil finishing for wood is suggested and this suggestion is to guide woodworkers into the right usage of wood finishing oil.

• 한국생산제조학회지
• /
• 제9권1호
• /
• pp.111-118
• /
• 2000

Over tightening experiments of the tension-controlled bolts are carried out and the stripping mechanism is reviewed base on the observed results. There are two modes of bolt failure due to the over tightening : one the fracture of the bolt the other the thread stripping Bifurcation between these two modes is rather delicate but it seems being related with the elastic flexibility of the bolt which depends upon the unused thread length. The fracture mode occurs in the bolts with good flexibility while the latter with bad one. According to the ISO Standard some meter coarse threads like M20 and M22 have the same pitch which causes bigger fastener to less resistance in shear and bending compared with the smaller one. however since UNC thread system adapts different pitch for different nominal diameter unified coarse threads show better stripping resistance than their corresponding meter threads.

• Natural Product Sciences
• /
• 제11권4호
• /
• pp.225-228
• /
• 2005

four varieties of ground nut (Arechis hypogea) were collected from different areas of Pakistan (Tillagang, Gujar khan, Hanoi and Pipplan) from Punjab province. The oils were extracted for the evaluation of lipid. Physico-chemical values of oils were determined like refractive index, peroxide value, unsaponifiable matter, acid value, iodine value, free fatty acid and ester value. The lipid profile as indicated by GLC showed that Palmitic acid ranged from 8.2-8.8%, proportions of oleic acid and linoleic acid varied from 57.8-59.87% and 22.5-24.1% respectively. Gujar khan variety of peanut has higher % age of oil (56.79). The higher yield of oil in this variety is not at the cost of any nutritional quality of peanut oil.