• 한국농공학회지
• /
• 제40권1호
• /
• pp.96-105
• /
• 1998

Soil properties, drain conditions and numerical analysis technique have great influence upon consolidation behavior. In relevant to the above described fact, this paper aims to examining the applicability of prediction model of consolidation as well as deformation characteristics for soft clayey foundation improved by sand drain. A case study for actual foundation of Kwangyang steel works was performed. Single drain consolidation model proposed by Hansbo and Biot's consolidation theory coupled with modified Cam-clay model developed during the research were employed for the FEM numerical analysis of the foundation. Both smear effect and drain capacity were taken into account for the analysis. Finally the applicability of the newly developed technique to the behavior of foundation composed of soft clay proved satisfactory.

• 한국전산구조공학회논문집
• /
• 제34권4호
• /
• pp.255-262
• /
• 2021

본 연구의 대상은 신축이음장치를 설치하지 않고 상부구조와 교대를 일체화하는 무조인트 교량이다. 무조인트 교량은 국내에 2009년 이후 본격적으로 도입되었다. 공용기간이 짧고 설계, 시공 및 유지관리 경험이 부족하여 장기거동에 대한 신뢰도가 아직은 부족하다. 수치해석을 통해 다수의 교량을 분석하는 경우 수치해석 모델은 안정적인 정확성 유지와 모델 구축의 편의성이 확보되어야 한다. 본 연구에서는 다양한 형식을 가진 무조인트 교량의 수치해석 모델을 선정하기 위해 민감도 해석을 수행하였다. 민감도 해석은 상용유한요소 프로그램인 MIDAS Civil과 ABAQUS를 사용하여 수행하였다. solid 요소 기반인 모델을 기준으로 하여 구조모델간 평균 및 최대 상대오차를 분석하였다. 해석결과 beam 요소 기반인 모델은 상대오차가 크게 발생하였고 shell 요소 기반인 모델은 상대오차가 아주 미소하였다. 따라서 무조인트 교량의 최적 수치해석 모델은 상대오차에 의한 변위 형상의 유사성과 정밀도를 유지하면서 실용적인 모델인 shell 요소 기반 모델이 가장 적합한 것으로 판단하였다.

• 대한토목학회논문집
• /
• 제29권5A호
• /
• pp.495-501
• /
• 2009

본 논문에서는 앵커로 연결된 콘크리트-강재 구조물이 극한 반복주기하중을 받는 경우를 수치 시뮬레이션하기 위하여 필요한 콘크리트-앵커 부착모형에 대하여 논하였다. 제안되는 앵커의 부착-미끄러짐 수치모형은 비선형 일축 연결요소의 조합으로 이루어지며 인발실험 결과를 이용하여 부착-미끄러짐 모형의 인자를 결정할 수 있다. 제안된 앵커 부착-미끄러짐 모형을 Abaqus 요소의 조합으로 구성하고, 이를 사용한 해석 결과와 앵커의 완전부착모형을 사용한 해석 결과를 실험 결과와 비교하였다. 이로부터 극한 반복하중을 받는 콘크리트-강재 구조물 수치해석에는 합리적인 앵커 부착-미끄러짐 모형이 반드시 사용되어야 한다는 것을 알 수 있었으며 본 연구에서 제안한 합성 연결모형을 이용하면 사실적으로 앵커의 부착-미끄러짐 현상을 모사할 수 있다는 것을 확인하였다.

• 대한기계학회논문집A
• /
• 제29권2호
• /
• pp.253-261
• /
• 2005

In decades, a substantial body of work on a unified viscoplastic model which considers the mechanism of plastic deformation and creep deformation has developed. The systematic scheme for numerical analysis of unified model is necessary because the dominant failure mechanism is the defect growth and coalescence in materials. In the present study, the unified viscoplastic model for materials with defects suggested by Suquet and Michel was employed for numerical analysis. The constitutive equations are integrated based on the generalized mid-point rule and implemented into a finite element program (ABAQUS) by means of user-defined subroutine (UMAT). To evaluate the validity of the developed UMAT code and the assessment of the adopted viscoplastic model, the results obtained from the UMAT code was compared with the numerical reference solution and experimental data. The unit cell analysis also has been investigated to study the effect of strain rate, temperature, stress triaxiality and initial defect volume fraction on the growth and coalescence of the defect.

• 한국지진공학회논문집
• /
• 제9권6호
• /
• pp.59-65
• /
• 2005

본 논문에서는 기존 연속균열모형들이 대형균열 표현에서 소성변형을 과도하게 계산하는 문제점을 극복한 대형균열모형을 제안하였다. 또한 소성손상모형을 수정한 형태로 제안된 균열모형을 수치해석에 사용할 수 있도록 3단계 회귀매핑 알고리즘으로 구성된 알고리즘을 제시하였다. 전산해석 예제들을 통하여 제안된 균열손상 모형과 알고리즘이 동적 하중을 받는 구조물의 균열해석문제에서 과도한 소성변형을 억제하는 합리적인 결과를 도출함을 알 수 있었다.

• 드라이브 ㆍ 컨트롤
• /
• 제19권1호
• /
• pp.62-68
• /
• 2022

Considering the characteristics of industrial machines that lack vehicle-induced wind, forced convection by a cooling fan is mostly required. Therefore, numerical analysis of an engine room is usually performed to examine the cooling performance in the room. However, most engine rooms consist of a number of parts and components at specific positions, leading to high costs for numerical modeling and simulation. In this paper, a new methodology for three-dimensional computer-assisted design simplification was proposed, especially for the pile of components and parts at the engine room outlet. A porous media model and regression analysis were used to derive a meta-model for imitating the flow rate reduction at the outlet by the pile. The results showed that the fitted model was reasonable considering the coefficient of determination. The final numerical model of the engine room was then used to simulate the velocity distribution by changing the mass flow rate at the outlet. The results showed that both velocity distributions were significantly changed in each case and the meta-model was valid in imitating the flow rate reduction by some piles of components and parts.

• Nuclear Engineering and Technology
• /
• 제55권9호
• /
• pp.3367-3382
• /
• 2023

Smoothed Particle Hydrodynamics (SPH) is a Lagrangian computational fluid dynamics method that has been widely used in the analysis of physical phenomena characterized by large deformation or multi-phase flow analysis, including free surface. Despite the recent implementation of eddy-viscosity models in SPH methodology, sophisticated turbulent analysis using Lagrangian methodology has been limited due to the lack of computational performance and numerical consistency. In this study, we implement the standard and dynamic Smagorinsky model and dynamic Vreman model as sub-particle scale models based on a weakly compressible SPH solver. The large eddy simulation method is numerically identical to the spatial discretization method of smoothed particle dynamics, enabling the intuitive implementation of the turbulence model. Furthermore, there is no additional filtering process required for physical variables since the sub-grid scale filtering is inherently processed in the kernel interpolation. We simulate lid-driven flow under transition and turbulent conditions as a benchmark. The simulation results show that the dynamic Vreman model produces consistent results with experimental and numerical research regarding Reynolds averaged physical quantities and flow structure. Spectral analysis also confirms that it is possible to analyze turbulent eddies with a smaller length scale using the dynamic Vreman model with the same particle size.

• 대한전자공학회논문지
• /
• 제26권11호
• /
• pp.1644-1651
• /
• 1989

In this paper, a two-dimensional numerical analysis of HEMT's with gate length of 0.6um is performed. In this case, Control Volume Formulation method which has been used in the analysis of heat transfer and fluid flow is used as a numerical method. As a mobility model, empirical formula including the velocithy overshoot phenomena is used instead of two-piece mobility model. The results obtained from this numerical analysis(i.e., the region in which cahnnel is formed, the strength of electric field in the channel, the distribution of potential, and the distribution of electron concentration etc.)are in good agreement with the previous analytic results. And our results also show the parasitic MESFET's operation in the range of the high gate voltage.

• Journal of the Korean Wood Science and Technology
• /
• 제35권3호
• /
• pp.1-9
• /
• 2007

다중 볼트 접합부에서는, 해석적인 방법으로는 볼트의 개수가 두 개까지 만으로 제한되고 다양한 여러 형태의 접합부 거동 해석이 불가능하다. 이를 해결하기 위하여 볼트의 개수에 구애받지 않고 거동을 예측할 수 있으며 또한 다양한 형태의 여러 접합부의 거동을 해석할 수 있게 하기 위하여 수치해석적 방법을 개발하고자 하였다. 수치해석법을 이용하여 거동 해석을 실시하기 위한 최적 변수로는 r=0.35, Kx=137.5, Ky=257.4가 각각 얻어졌다. 기존의 이론적 방법에 비하여 본 연구에서 개발한 수치해석 모델의 거동 해석 정확도가 더 높음을 알 수 있었다.

• Steel and Composite Structures
• /
• 제38권6호
• /
• pp.637-656
• /
• 2021

The component-based method is widely used to analyze the initial stiffness of joint in steel structures. In this study, an analytical component model for determining the column face stiffness of square or rectangular hollow section (SHS/RHS) subjected to tension was established, focusing on endplate connections. Equations for calculating the stiffness of the SHS/RHS column face in bending were derived through regression analysis using numerical results obtained from a finite element model database. Because the presence of bolt holes decreased the bending stiffness of the column face, this effect was calculated using a novel plate-spring-based model through numerical analysis. The developed component model was first applied to predict the bending stiffness of the SHS column face determined through tests. Furthermore, this model was incorporated into the component-based method with other effective components, e.g., bolts under tension, to determine the tensile stiffness of the T-stub connections, which connects the SHS column, and the initial rotational stiffness of the joints. A comparison between the model predictions, test data, and numerical results confirms that the proposed model shows satisfactory accuracy in evaluating the bending stiffness of SHS column faces.