• Tribology and Lubricants
• /
• 제37권6호
• /
• pp.240-245
• /
• 2021

Ceramic coatings with high hardness and excellent chemical stability have been successfully applied to various machine elements, tools, and implants. However, in the case of monolayer coating on soft substrates, a high-stress concentration at the interface between the coating and the substrate causes delamination of the coating layer. Recently, to overcome this problem, multilayer coatings with a metal layer with a low modulus of elasticity added between the ceramic and the substrate have been widely applied. This study presents the third part of a recent study and focuses on the effect of the number of coating layers on the Brinell hardness of multilayered coating with TiN/Ti, following the two previous studies on a new Brinell hardness test method for a coated surface and on the influence of substrate and coating thickness. Indentation analyses are performed using finite element analysis software, von Mises stress and equivalent plastic strain distributions, load-displacement curves, and residual indentation shapes are presented. The number of TiN/Ti layers considerably affect the stress distributions and indentation shapes. Moreover, the greater the number of TiN/Ti layers, the higher is the Brinell hardness. The stress and plastic strain distributions confirm that the multilayer coatings improve the wear resistance. The results are expected to be used to design and evaluate various coating systems, and additional study is required.

• 한국건축시공학회지
• /
• 제3권2호
• /
• pp.119-127
• /
• 2003

Test specimen test was performed using concrete reinforced with fiber sheet and the test variables were based on the kinds of fiber and the number of reinforcement layers. Using steel-concrete reinforced with fiber sheet, compression tests were performed and the test variables were the kinds of fiber, number reinforcement layers and reinforcement layer order. The following results were obtained: 1) It was demonstrated that compressive strength of the test specimen reinforced during test specimen test and member test increased as the number of reinforcement layers increased. 2) It was shown that non-reinforced test, specimen were destroyed during the member tests, but the specimen reinforced with CFS destroyed and the GFS-reinforced specimen and composite reinforced specimen showed ductile destruction. 3) As a result of tests on kinds of reinforcement fiber, it was demonstrated that CFS-reinforced test specimen had higher compressive strength in a 공시체 test. In the member test, 2ply-and 3ply-GFS reinforced specimens except lplied one had higher compressive strength. It was because partial destruction occurred due to the rate of height/section. 4) For layer strength order, compared with test specimen reinforced only with a single reinforced material, test specimen reinforced with CFS and GFS, and test specimen reinforced with CFS first showed better results in compressive strength and ductility judgement.

• 대한기계학회논문집
• /
• 제9권6호
• /
• pp.750-756
• /
• 1985

본 연구에서는 종횡비 0.1이고 상.하 수평경계면이 단열된 직각밀폐용기내에 서 Pr수가 1보다 큰 물(Pr=6.97, 20.deg. C) 및 실리콘 오일(Pr=1086.42, 20.deg. C)의 양단의 온도차에 의한 자연대류에서 아직 충분히 연구되지 않은 코어형상에 주안점을 두고 실 험적으로 관찰, 조사하였으며 그 결과를 Lee의 이론적인 예측과도 비교, 검토해 보았 다.

• Advances in concrete construction
• /
• 제13권4호
• /
• pp.327-337
• /
• 2022

This paper is concerned with the vibration analysis of middle layer cylindrical shell made of functionally graded material. The outer layers and inner layer are composed of functionally graded and isotropic material respectively. The Rayleigh Ritz method is applied to solve the presented shell dynamics equations. Two configurations are constructed with layers distributions. Fundamental natural frequencies of the three layered cylindrical shell is plotted against the circumferential wave number with different power law exponents. The frequency decreases with the increase of power law exponent. The fundamental natural frequencies first decreases and fall down to its minimum value, after frequencies increases with circumferential wave number. This is due to change in the magnitude of extensional and bending energies of the cylindrical shells. The computer software MATLAB has been employed for the computation of presented frequencies and tested the results obtained in order to assess the accuracy and validity of the cylindrical shell model for predicting the vibration frequencies of cylindrical shell.

• 생약학회지
• /
• 제40권4호
• /
• pp.280-285
• /
• 2009

Korean folk medicine 'JoRitDae' has been used mainly to cure vomiting and cancer. With regard to the botanical origin of 'JoRitDae', it has been considered to designate the rhizome of Sasa species (Gramineae), but there was no pharmacognostical confirmation on it. To clarify the botanical origin of 'JoRitDae', the anatomical characteristics of the rhizome of Sasa species growing wild in Korea and Japan, Sasa borealis, S, kurilensis, S. quelpaertensis, S. charatacea and S. senanensis were studied. As a result, it was found the morphological criteria for the five Sasa species that could discriminate them by the number of cell layers in cortex, the ratio of thickness of cortex to rhizome radius, the number of cell layers in the vascular bundle sheath, the total number of vascular bundle and thickness of vascular bundle sheath. According to these criteria, it was clarified that the commercial folk medicine 'JoRitDae' was the rhizome of Sasa borealis.

• 한국의류학회지
• /
• 제46권4호
• /
• pp.565-582
• /
• 2022

In recent years, Jumchi-Hanji made of mulberry paper is used as a material for fashion items. This study examined the effect of the type of Choji method (Oebal-teugi or Ssangbal-teugi), layer number (one or two layers) and Jumchichigi time (20, 40, or 60 minutes) on the tensile, wet tensile, tearing and bursting strengths of Jumchi-Hanji. Jumchi-Hanjis used as test samples in this study were made from mulbery paper which was manufactured with either bleached or unbleached paper mulberry from Thailand. The results showed that Jumchi-Hanji made with two layers of mulberry papers had higher strength properties than Jumchi-Hanji made with only one layer. The strength properties of Jumchi-Hanji also increased with longer Jumchichigi time. Furthermore, this study confirmed that the effects of Jumchichigi time on Jumchi-Hanji strengths differed based on the type of Choji method, the layer number of mulberry papers used, and the specific strength property measured. Therefore, to guarantee the strength properties required by the application of Jumchi-Hanji paper as a fashion material, it is necessary to carefully consider the adequate Choji method and layer number to apply in the manufacture of Thai mulberry paper and the adequate duration time needed to perform Jumchichigi to Thai mulbery paper.

• Journal of Radiation Protection and Research
• /
• 제29권1호
• /
• pp.25-31
• /
• 2004

Results of EGS4 based calculations to study the spatial resolution of gas detectors are described. The calculations include radial distribution of electrons generated by photons of various energies penetrating into variable thickness of Ar and Xe gas layers. Given a desired spatial resolution, the maximum allowed thickness of gas layer for each energy level is determined. In order to obtain 0.1mm spatial resolution, the maximum thickness for the Ar gas is found to be 2mm for photon energies below 14keV while the optimum energy of photons for Xe gas with the same thickness is about 45keV. The results of calculations performed to compare the number of electrons generated by CsI coated micro-channel plate and the number of electrons generated by the Ar and Xe gas layers are described. The results show that the number of electrons generated by the gases is about 10 times higher than the one generated by CsI coated micro-channel plate. A few sample gray scale images generated by these calculations are included.

• 대한기계학회논문집
• /
• 제18권12호
• /
• pp.3297-3304
• /
• 1994

Experimental investigation have been made to study the double-diffusive nature of convection of an initially stratified salt-water solution heated from below in a cylindrical cavity. The objective is to examine the process of mixed-layer formation, the flow phenomena, the heat transfer characteristics, and temperature and concentration distribution according to the changes in the effective Rayleigh number based on the reference height which represents the relation of temperature and concentration gradient. The types of initially formed flow pattern are categorized in three regimes depending on the effective Rayleigh number ; stagnant flow regime, single mixed-layer flow regime and successively formed multiple mixed-layer flow regime. The temperature and concentration profiles are both uniform in each layer due to convective mixing in the layered flow regime, but both linear in stagnant flow regime and single mixed-layer flow regime. At the interface between adjacent layers, the temperature changes smoothly but the concentration changes rapidly. The layers expand by diffusion of concentration through the interface along with its random fluctuation.

• Archives of Plastic Surgery
• /
• 제32권4호
• /
• pp.516-520
• /
• 2005

Multilayered cartilage graft has been clinically used at tip plasty, total ear reconstruction, and cleft lip nasal deformities. Perichondrial flap or a free perichondrium has been also commonly used for induction of neocartilage. However, the influence of perichondrium on multilayered cartilage graft to strength and growth rate is still unknown. The purpose of this study was to compare the strength and growth rate of different multilayered cartilage graft and to present the most ideal model of multilayered cartilage graft. Twenty New-zealand white rabbit were used. Triple layers of cartilage grafts with various perichondrium were inserted into six separate pockets in paravertebral region of rabbits. The grafts were grossly and microscopically observed on 8 and 16 weeks after grafting. On gross observation, the grafts showed marked enlargement of three layers of cartilage grafts with perichondrium compare with three layers of cartilage grafts without perichondrium In histologic examination, the number of PCNA-labelled cells were significantly high on three layers of cartilage grafts with perichondrium. In conclusion, this study suggested that triple-layer graft of cartilage grafts with perichondrium on the outside of triple-layer graft has strength and an effect on chondrogenetic induction by the perichondrium.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1132-1132
• /
• 2001

This work is a further development of the method created by G. Krivoshiev in 1996 for elimination of peel interference and prediction of fruit flesh optical density. In this investigation, as it was earlier, the objects are observed as being structured by three successive layer “AlongrightarrowOlongrightarrowB” denoting “peel-flesh-peel”. In the first version of the method the transmittances of the surface layers A and B were measured according to Kubelka-Munk theory by means of their diffuse reflectance. At that the overall transmittance T was approximated in the form of a multiplication approximation being valid for plane-parallel layers of a non-scattering material. In this work this approximation was done away with applying the theory of discontinuum, respectively Benfor's equations. As a result two mathematical models were created for non-destructive prediction of fruit flesh optical density. These models are different from the ones based solely on Kubelka-Munk theory, the destruction being marked by the terms 1n (1 - $R_{A}R_{0}$) and 1n (1 - $R_{A}R_{B}$), where: $R_{A}$ and $R_{B}$ are reflectance values for the surface layers A and B; $R_{0}$ is the average reflectance of the internal layer that could be obtained empirically by means of a preliminary measurement of sufficiently large number of physically peeled fruits of a given species and variety.