• 한국염색가공학회지
• /
• 제1권1호
• /
• pp.35-46
• /
• 1989

Experiments described in which cotton fabrics at different stages of chemical processing were abraded to different extents on a Stoll Abrasion Tester with three different abradants, namely, a worsted fabric, flax fabric and silicon carbide paper. The four different plain-weave cotton fabrics selected were 1) desized, 2) scoured and bleached, 3) mercerized, 4) resin-treated. The surface abrasive damages of treated fabrics were observed by SAM, and load-elongation percent retentions of abraded samples were measured by Instrong Tester. The result were as follows: 1. The maximum percent retention of load-elongation with three different abradants was exhibited by the scoured and bleached fabrics and the minimum by the resin finished fabric. 2. The electron micrographs of four different cotton fabrics abraded by flax, worsted fabric abradants for 900 rubs showed a large number of criss-crossing stray fibers in fabric structure. It may be the molecular adhesion for frictional resistance to be explained. 3. The electron micrographs of four different cotton fabrics abraded by silicone carbide abradants showed the form of busing or mashing fibers in fabric structure. The above might be on the basis of the ploughing theory.

• 전력전자학회논문지
• /
• 제25권6호
• /
• pp.503-510
• /
• 2020

The importance of DC breakers as key protection equipment is increasing in accordance with growing concerns on MVDC distribution network systems without DC/AC conversion. Different from the situation in AC systems, no natural zero-crossing point exists in DC systems. Thus, DC breaker technology is more difficult than AC breaker technology. The solutions for DC breakers can be divided into three types: mechanical, power electronics, and hybrid. In this study, the operating principles of several topologies of hybrid circuit breakers and that of the proposed DC breaker are analyzed and simulated by sorting two types. The breakers are compared in terms of the type and number of semiconductors, volume, power loss, auxiliary components, isolation, and other aspects. The advantages and disadvantages of the breakers are also analyzed.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.271-276
• /
• 2002

Existing design equations generally overestimate the shear strength of the circular transverse reinforcement. This is due to the simplification of the discrete distribution of the reinforcement to the continuous one and the inappropriate application of the classical truss model to the circular section, which is different in shear-resisting component from the rectangular section. The present study introduces a new model considering the starting point of the diagonal crack, the number of transverse reinforcing bars crossing the crack and the effective strength component of the transverse resistance. This model leads to a simple design equation which is derived using the linear regression method and is in agreement with the lower bound of exact strength curve.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.523-528
• /
• 2000

In this paper, the new type biped walking robot which is composed of the minimum number or links just for walking and its appropriate gaits are proposed. The proposed new gaits for this robot are four-crossing, crawling, standing and turning gait. In designing the biped robot we propose the Performance Index which means the needed torque per a moving distance and generate foot trajectories by $3^{rd}$ order spline Interpolation. Among those, numerically we find the optimal conditions which minimize the Performance Index. Dynamically stable walking of the biped robot is realized by satisfying the stability condition of ZMP(zero moment point), which is related to maintaining the ZMP within the region of the supporting foot during the s1n91e leg support phase. We determine the region of mass center from the stability condition of ZMP and plan references which track the mass conte. trajectory of constant velocity. Finally we implement the gaits statically tracking the planned trajectories using PD control method.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2013년도 춘계학술대회
• /
• pp.169-171
• /
• 2013

The ships always have had the risk of collision. There are also a number of near-miss situations especially in the congested area such as port entrance, restricted waters and crossing point of the ship's route. In those areas, the navigator might have more stress than other areas. If the collision risk of decided area is calculated, it might be possible to analyse the human factors by using this data. It is also helpful for deciding a position of aids to navigation or any other system for the safety navigation. For this purpose, the model of collision risk with AIS data has been explained in this paper. The calculated result from the proposed model has been examined by using the simulation.

• Animal cells and systems
• /
• 제2권4호
• /
• pp.435-438
• /
• 1998

In the present study, we have examined the crossability of four species in the A. jaluense complex to provide additional information on their delimitation and levels of differentiation. Crosses between diploid A. chiisanense and the tetraploid species including A. jaluense s. str., A. triphyllum, and A. pseudoproliferum yielded no fruit- or seed-set, indicating that the former species is reproductively completely isolated from the latter three species. In interspecific crosses between the tetraploid species, combinations involving A. jaluense s. str. resulted in much reduced fruit- and seed-set, indicating that A. jaluense s. str. is more or less reproductively isolated from the other tetraploid species. However, crossing data revealed the absence of reproductive isolation between A. triphyllum and A. pseudoproliferum These results strongly support the relationships that have been previously suggested for the A. jaluense complex on the basis of morphology, chromosome number, and flavonoid chemistry.

• 대한의용생체공학회:의공학회지
• /
• 제7권2호
• /
• pp.169-182
• /
• 1986

Pulsed ultrasonic Doppler system is a useful diagnostic instrument to measure blood-flow-velocity, velocity profile, and volume-blood-flow. This system is more powerful compare with 2-dimensional B-scan tissue image. A system has been deve- loped and ii being evaluated using TMS 32010 DSP. We use this DSP for the purpose of real-time spectrum analyzer to obtain spectrogram in singlegate pulsed Doppler system and for the serial comb filter to cancel clutter and zero crossing counter to estimate Doppler mean frequency in multigate pulsed Doppler system. The Doppler shift of the backscattered signals is sensed in a phase detector. This Doppler signal corresponds to the mean velocity over a some region in space defined by the ultrasonic beam dimensions, transmitted pulse duration, and transducer ban(iwidth. Multi- gate pulsed Doppler system enable the transcutaneous and simultaneous assessment of the velocities in a number of adjacent sample volumes as a continuous function of time. A multigate pulsed Doppler system processing the information originating from presented.

• Journal of Electrical Engineering and information Science
• /
• 제3권3호
• /
• pp.292-299
• /
• 1998

Placement of multiple dies on an MCM or high-performance VLSI substrate is a non-trivial task in which multiple criteria need to be considered simultaneously to obtain a true multi-objective optimization. Unfortunately, the exact physical attributes of a design are not known in the placement step until entire design process is carried out. When the performance issues are considered, crosstalk noise constraints in the form of net separation and via constraint become important. In this paper, for better performance and wirability estimation during placement for MCMs, several performance constraints are taken into account simultaneously. A graph-based wirability estimation along with the Genetic placement optimization technique is proposed to minimize crosstalk, crossing, wirelength and the number of layers. Our work is significant since it is the first attempt at bringing the crosstalk and other performance issues into the placement domain.

• Korean Journal of Mathematics
• /
• 제26권4호
• /
• pp.683-700
• /
• 2018

We get one theorem which shows existence of solutions for one-dimensional jumping problem involving p-Laplacian and Dirichlet boundary condition. This theorem is that there exists at least one solution when nonlinearities crossing finite number of eigenvalues, exactly one solutions and no solution depending on the source term. We obtain these results by the eigenvalues and the corresponding normalized eigenfunctions of the p-Laplacian eigenvalue problem when 1 < p < ${\infty}$, variational reduction method and Leray-Schauder degree theory when $2{\leq}$ p < ${\infty}$.

• Wind and Structures
• /
• 제35권2호
• /
• pp.93-108
• /
• 2022

Steel tubular towers are commonly used in UHV and long crossing transmission lines. By considering effects of the model scale, the solidity ratio and the ratio of the mean width to the mean height, wind tunnel tests under different wind speeds on twenty tubular steel tower body models and twenty-six tubular steel cross-arm models were completed. Drag coefficients and shielding factors of the experimental tower body models and cross-arm models in wind directional axis for typical skewed angles were obtained. The influence of the lift forces on the skewed wind load factors of tubular steel tower bodies was evaluated. The skewed wind load factors, the wind load distribution factors in transversal and longitudinal direction were calculated for the tubular tower body models and cross-arm models, respectively. Fitting expressions for the skewed wind load factors of tubular steel bodies and cross-arms were determined through nonlinear fitting analysis. Parameters for skewed wind loads determined by wind tunnel tests were compared with the regulations in applicable standards. Suggestions on the drag coefficients, the skewed wind load factors and the wind load distribution factors were proposed for tubular steel transmission towers.