• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1288-1288
• /
• 2001

X-ray powder diffraction (XRD) is utilized for determination of polymorphism in crystalline organic materials. Though convenient to use in a laboratory setting, XRD is not easily adapted to in situ monitoring of synthetic chemical production applications. Near-Infrared spectroscopy (NIR) can be adapted to in situ manufacturing schemes by use of a source/detector probe. Conversely, NIR is unable to conclusively define the existence of polymorphism in crystalline materials. By combining the two techniques, a novel simultaneous NIR/XRD instrument has been developed. During material's analysis, results from XRD allow for defining the polymorphic phase present, and NIR data are collected as a fingerprint for each of the observed polymorphs. These NIR fingerprints will allow for the development of a library, which can be referenced during the use of a NIR probe in manufacturing settings.

• Macromolecular Research
• /
• 제8권5호
• /
• pp.215-223
• /
• 2000

A novel diamine monomer, containing fluorine and phosphine oxide, bis(3-aminophenyl) 3,5-bis(trifluoromethyl)phenyl phosphine oxide (mDA6FPPO), was prepared via Grignard reaction, and utilized to prepare polyimides with dianhydrides such as PMDA, 6FDA, BTDA or ODPA, by the conventional two-step route; preparation of poly(amic acid), followed by solution imidization. The polyimides were characterized by FT-IR, NMR, and DSC with intrinsic viscosity and refractive index also being evaluated. A phosphine oxide containing monomer, bis(3-aminophenyl)phenyl phosphine oxide (mDAPPO) and a commercial 3,3-diaminodiphenyl sulfone (mDDS) were also used for comparison. The polyimides derived from mDA6FPPO exhibited high T$\sub$g/, excellent solubility and low birefringence.

• Bulletin of the Korean Chemical Society
• /
• 제29권1호
• /
• pp.181-186
• /
• 2008

2,5-Di-(2'-hydroxyethoxy)-4'-nitrostilbene (3) was prepared and polycondensed with terephthaloyl chloride, adipoyl chloride, and sebacoyl chloride to yield novel T-type polyesters (4-6) containing the NLO-chromophores dioxynitrostilbenyl groups, which constituted parts of the polymer backbones. Polymers 4-6 are soluble in common organic solvents such as acetone and N,N-dimethylformamide. They showed thermal stability up to 260 oC in thermogravimetric analysis with glass-transition temperatures obtained from differential scanning calorimetry in the range 90-95 oC. The second harmonic generation (SHG) coefficients (d33) of poled polymer films at the 1064 nm fundamental wavelength were around 1.42 ´ 10-9 esu. The dipole alignment exhibited high thermal stability up to 5 oC higher than glass-transition temperature (Tg), and there was no SHG decay below 100 oC due to the partial main-chain character of polymer structure, which is acceptable for NLO device applications.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.365.2-365.2
• /
• 2014

Nickel sulfide (NiS) has been utilized in optoelectronic applications, such as transformation-toughening agent for materials used in semiconductor applications, catalysts, and cathodic materials in rechargeable lithium batteries. Recently, high quality nickel sulfide thin films have been explored using ALD/CVD technique. Suitable precursors are needed to deposit thin films of inorganic materials. However, nickel sulfide precursors available for ALD/CVD process are very limited to nickel complexes with dithiocarbamate and alkanethiolate ligands. Therefore, it is essential to prepare novel nickel sulfide suitable for ALD/CVD precesses. Herein we report on the synthesis and characterization of new nickel sulfide complex with designed aminothiolate ligand. Furthermore thin films of NiS have been prepared on silicon oxide substrates by spin coating nickel precursor 10 wt% in THF. The novel complex has been characterized by means of 1H-NMR, elemental analysis, thermogravimetric analysis (TGA), X-ray Diffraction (XRD) and scanning electron microscope (SEM).

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.475-478
• /
• 2002

VA-LCDs is widely used for recent LCD productions owing to good viewing angle and high contrast. To apply for VA-LCDs, we have synthesized novel homeotropic alignment materials, which all generated high pretilt angles ($9^{\circ}$). The thermal stabilities of them were observed by thermogravimetric analysis (TGA). Transmittances of the NLC cell used the new alignment material were not changed before and after thermal annealing at $120^{\circ}C$ for 24hrs. In this work, the synthesis and alignment properties of new homeotropic alignment materials will be reported.

• Macromolecular Research
• /
• 제13권1호
• /
• pp.8-13
• /
• 2005

A novel silicon-containing epoxy resin, the diglycidylether of bisphenol A-silicon (DGEBA-Si), was synthesized and characterized. The properties of the DGEBA-Si epoxy resin cured with 4,4-diaminodiphenyl methane (DDM), including its cure behavior, glass transition temperature, thermal stability, and mechanical strength were investigated. The char yield of the DGEBA-Si/DDM system was higher than that of a commercial DGEBA/DDM system, indicating that the DGEBA-Si epoxy resin showed good flame-retardance. The cured DGEBA-Si/DDM specimens possessed lower glass transition temperatures and higher mechanical properties than DGEBA/DDM specimens. These features were attributed to the introduction of siloxane groups into the main chain of the epoxy resin, which resulted in the improved flexibility of the cured DGEBA-Si/DDM system.

• 대한치과의사협회지
• /
• 제51권1호
• /
• pp.6-11
• /
• 2013

Dental ceramics is well known to have excellent esthetics, biocompatibility as well as high compressive strength. However, the fragility of ceramics against tensile and shear loads leading to the delayed fracture of micro crack on ceramic surface and the backwardness of ceramic fabrication technique limit the usage of ceramic materials in dentistry. Among all ceramic materials, zirconia has been introduced to overcome the drawback of conventional dental ceramics in the field of dentistry due to the nature of zirconia featuring proper opalescence and high fracture toughness. Also, novel manufacturing techniques enable ceramic materials to prepare high esthetic anterior and posterior all ceramic system. In this paper, it is introduced and discussed that novel techniques characterizing the bond strength between zirconia core and veneering ceramics and analyzing the fluorescence of dental ceramics in order to overcome the gap between the results of basic research and the feasibility of the results in the field of dental clinics.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 춘계학술발표대회
• /
• pp.8.1-8.1
• /
• 2009

The self-assembly of peptide-based building blocks into nanostructures is an attractive route for fabricating novel materials because of their capacity for molecular recognition and functional flexibility as well as the mild conditions required in the fabrication process. Among various peptide-based building blocks forming nanostructures, the simplest building blocks are aromatic dipeptides like diphenylalanine, which can readily self-assemble into nanotubes in aqueous solutions at ambient conditions. Recently, we have developed a high-temperature solid-phase self-assembly process for diphenylalanine. Through this novel process, we succeeded in the growth of vertically well-aligned, uniform nanowires from amorphous peptide thin film. To demonstrate the versatility of our approach, we also fabricated a micropattern of peptide nanowires by combining our solid-phase growth method and simple soft lithographic techniques. We believe that our studies on peptide self-assembly will provide a new horizon for peptide-based nanofabrication.

• 전기화학회지
• /
• 제17권4호
• /
• pp.237-244
• /
• 2014

We report novel and simple structure of supercapacitors fabricated by using flexible glass fibre separators as templates. This method does not require separate electrodes, binders and high pressure/temperature to build the supercapacitor unit cells as required by the conventional technology. The supercapacitors were fabricated by drop-casting solution mixtures of carbonaceous active materials/gel electrolytes onto two sides of glass fibre separators. Two carbonaceous materials (nanoscaled activated carbons, multi-walled carbon nanotubes) were investigated as electrode materials. The electrochemical measurements reveal that the separatorbased supercapacitors using ACs successfully demonstrated significant mass specific capacitance ($22.3F\;g^{-1}$) and energy density ($9.7Wh\;kg^{-1}$), indicating this method can be useful in fabricating flexible, wearable and stretchable energy storage devices in more straightforward and cost-effective way than current technology.

• 폴리머
• /
• 제39권1호
• /
• pp.151-156
• /
• 2015

본 연구에서는 디메틸실록산과 벤젠으로 구성된 단량체 용액에 방향성 결정화를 두 차례 진행하여 새로운 기공 구조를 제작하였다. 우선 첫 번째 용매의 방향성 결정화를 통해 벌집 형태의 기공 구조를 제작하였다. 상기 용액을 다시 담지한 뒤, 다시 방향성 결정화를 진행하게 되면 벌집 형태의 기공 구조 내에 또 다른 기공 구조가 혼재되어 있는 새로운 구조를 얻을 수 있었다. 반복된 방향성 결정화로 제조된 다공성 소재는, 한번의 방향성 결정화로 제조된 소재보다 압입탄성계수와 압입경도가 높았으며, 높은 농도의 용액으로 두 번째 방향성 결정화가 진행된 경우에 최대 증가치(압입탄성계수: 2140% 증가, 압입경도: 2330% 증가)를 얻을 수 있었다. 반면, 두 번째 방향성 결정화가 진행된 경우, 첫 번째 방향성 결정화만 진행된 경우보다 기공률과 접촉각은 감소하였으며, 높은 농도의 용액으로 두 번째 방향성 결정화가 진행된 경우 이들 물성의 최대 감소(기공률: 21% 감소, 접촉각: 36% 감소)를 관찰할 수 있었다.