• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2005년도 춘계 학술기술논문발표대회 논문집
• /
• pp.17-20
• /
• 2005

This paper reported the temperature history of concrete placed at deck plate slab under cold climate condition by varying with surface insulating type. No curing sheet and simple insulation curing including non-woven fabric, double layer bubble sheet, the combination of double layer bubble sheet and non-woven fabric dropped temperature below zero within 24 hours, which caused frost damage at early age. On the other hand, the combination of double layer bubble sheet and non-woven fabric and double layer bubble sheet and styrofoam maintained minimum temperature above $4^{\circ}C\;and\;8^{\circ}C$, respectively. Based on core test results compressive strength of concrete with the combination of double layer bubble sheet and non-woven fabric and double layer bubble sheet and styrofoam was higher than those with other curing method due to good insulation effect.

• 한국염색가공학회지
• /
• 제18권6호
• /
• pp.57-62
• /
• 2006

The functional non-woven fabrics have been applied in various industry fields, such as clothing, hygiene, environment, medical and so forth. The functional non-woven fabrics for wet tissue were manufactured by meltblown and wet tissue finishing processes. The wet tissue was contained the various composition substances such as Benzalkonium Chloride(0.2292g), lodo-2-propynyl Butyl carbamate(0.0069g) and 5-Chloro-2-Methyl-Isothiazolin -3-one, 2-Methyl-Isothiazolin-3-one (0.0034g) with purified water (999.76g). In this study, the functional wet tissue based on meltblown nonwovens has been applied in dairy cattle for prevention on cow mastitis. Mastitis is the most costly disease results in lost milk production, decreased milk quality, milk discard, early culling of cows, drug costs and labor costs in dairy cattle. Therefore, this study was investigated to evaluate clinical effect of the functional wet tissue in mastitis control. The results, after experiment the functional wet tissue used group, demonstrated that the infection rate, cure rate and mean somatic cell count(SCC) were significantly decreased as compared to the control group.

• 원예과학기술지
• /
• 제33권3호
• /
• pp.326-330
• /
• 2015

본 시험은 노지 논고추 터널 재배시 피복용 재료에 따른 고추의 생육 및 수량에 미치는 영향을 조사하기 위하여 수행되었다. 터널 피복용 재료는 일라이트 부직포, P.E 비닐을 사용하였다. 기온과 지온은 일라이트 부직포 및 P.E 비닐 터널 처리구에서 노지보다 각각 $7-8^{\circ}C$, $2-3^{\circ}C$ 높았고, 상대 습도도 터널 설치구가 노지보다 30% 더 높게 유지되었다. 고추의 생육과 수량은 일라이트 부직포 및 P.E 비닐 터널 설치구에서 높았고, 10a당 수량은 일라이트 부직포 및 P.E 비닐을 이용한 터널 재배시 노지 재배 대비 각각 30%, 26% 증수되어 고추 논재배시 수량확보를 위한 재배법으로 적용이 가능할 것으로 판단된다.

• 복식문화연구
• /
• 제6권2호
• /
• pp.66-76
• /
• 1998

In order to investigate the effect of shoulder pad affecting the arm movement, eleven women volunteers of standard body whose age is from eighteen to twenty-four(x±1σ) were chosen and this experiment had done according to front-vertical motion, side-vertical motion and horizontal motion of upper limps for tow different materials of shoulder pad(sponge, non-woven) and four different thickness of shoulder pad(0.6cm, 0.8cm, 1.2cm). On the base of this, this study, when putting on shoulder pad, try to find the reform method of shoulder part pattern. The results are as follows. 1. When puting on shoulder pad to blouse pattern to rise shoulder pad for rate of two-third per thickness is seemingly the best for sensory evaluation. So, when putting on shoulder pad, we understand that in order to improve sensory evaluation. So, when putting on shoulder pad, we understand that in order to improve sensory evaluation of clothes, when that, rising shoulder pad for ate of two-third per thickness is the best. 2. From the results of measure of functional volume and physiological value for functionality evaluation according to thickness and material, motion of shoulder pad, 1.2 cm thickness and non-woven material is evaluated the worst for functionality. 3. From the results of sensory evaluation and functionality evaluation of material of shoulder pad, sponge material is superior for functionality but not for sensory evaluation, non-woven material is superior for sensory evaluation non-woven material is superior for sensory evaluation but not for functionality. So, think that it had better use sponge material for functional clothes, non-woven material for aesthetical clothes. 4. From the results of functionality of clothes, when putting on shoulder pad, the worst discomfortable parts are the armpit part and the shawl part, functionality of these part shoulder be reformed.

• 펄프종이기술
• /
• 제44권3호
• /
• pp.49-55
• /
• 2012

Even though corrugated boards are the most common packaging materials for agricultural products, conventional corrugated boards are not able to maintain the freshness of agricultural products. In order to overcome the limitations of conventional corrugated boards, a new hybrid corrugated board-composed of linerboard, a corrugating medium, and non-woven fabric-was designed to possess antibacterial, high porous and shock-absorbing properties. In this study, we compared the physical properties of non-woven fabric to those of the base papers of conventional corrugated boards and developed a new adhesive system as a first step toward manufacturing the hybrid corrugated board. We found that the non-woven fabric, which had relatively high elongation, was applicable in the corrugated board process, and that the manufacturing conditions must be controlled in order to prevent the break of the non-woven fabric. The mixture of starch and styrene-butadiene (SB) latex showed high adhesive strength, but the addition level of SB latex should not exceed 30% in starch solution.

• 한국환경과학회지
• /
• 제28권6호
• /
• pp.545-552
• /
• 2019

Tropaeolum majus, with a high decorative and food demand for vertical greening systems, has been utilized to revitalize urban agriculture. The effects of number of non-woven fabrics in a non-water environment and the adaptability of T. majus to this system were investigated. Planting ground composition of the container-type wall vertical greening system was made using non-woven fabric in one, two, three, or four layers. The results showed that the soil water content remained the highest when the non-woven fabric comprised 4 sheets. The morphological properties showed more growth with the 4 sheets than with 1, 2, and 3 sheets. In terms of physiological characteristics, chlorophyll content was mostly high in the 4 sheets, while shoot fresh weight value was in the order of 3 > 4 > 2 > 1 sheet, and root fresh weight value was in the order of 4 > 2 > 1 > 3 sheets. The dry weight of the measured values in the shoot was in the order of 4 > 3 > 2 > 1 sheet while no clear difference was found in the root of each treatment. The difference in the flowring characteristics was not different, but in evaluating the characteristics as a whole, the growth in the three layers of non-waven fabric was the best. In addition, the soil moisture contents and the growth characteristics were statistically significant as a positive correlation between the groups. Thus, greater the non-woven fabric, the higher is the adaptability of T. majus to dry stress under soil water-free conditions by maintaining soil moisture content. This showed that it represented an effective alternative as a method of vertical greening system for lower maintenance urban agriculture.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 추계학술발표대회 논문집
• /
• pp.195-198
• /
• 2001

To improve the properties of FRP composite materials, the hybrid prepreg with non-woven tissue (NWT) is developed. The hybrid prepreg consists of undirectional prepreg and NWT prepreg. The NWT prepreg is made by compounding the NWT and polymer resin, which is similar to the production method of FRP prepreg. The NWT has short fibers which are discretely distributed with in-plane random orientation. The stiffness and strength of NWT composites are lower than those of continuously fibrous composites. The strengthening technique and fabricating technique for the hybrid prepreg are described in this work. The mechanical characteristics of hybrid composites with NWT are discussed and compared with those of the FRP composites.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 추계학술대회
• /
• pp.71-76
• /
• 2003

This paper describes the characteristic of a large-diameter pipe to obtain smooth surface using Electropolishing after grinding using a non-woven fabric. Grinding using a non-woven fabric is possible under lower load and fine effect comparing with Wheel grinding. Also, the ion from the surface of the metal is eliminated by means of an electrical potential and current in Electropolishing. Electropolishing is used for leveling the surface, improving the physical appearance of the part, promoting corrosion properties and reducing contamination and adhesion of the surface. Therefore, the aim of the present study is to investigate the internal machining of a large-diameter pipe for semiconductor using experimental design method.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 가을 학술발표회 논문집
• /
• pp.265-266
• /
• 2003

The first developed engineering plastic and synthetic fiber, Nylon has been widely used because of its excellent properties. Recently, electrospinning has been gradually spotlighted as a different method of producing fibers, in which fibers of submicron can be consistently produced [1,2]. In this work, we have prepared nanofiber non-woven from Nylon 66 of which properties were investigated. The morphological properties of Nylon 66 non-woven was observed by SEM. (omitted)

• 한국의상디자인학회지
• /
• 제13권2호
• /
• pp.163-173
• /
• 2011

The objective of this study is to examine the current status of manufacturing formal knit jackets for middle-aged women. Fifteen manufacturers specializing in formal knitwear brands were chosen as the study subjects, and interviews and questionnaires were used with patterners and designers. The questionnaire was composed of 27 items and began with general questions, such as how the jackets were manufactured. Specific questions, such as materials and sewing method, were also considered further on. The results are as follows: First, as for the structure of the knit jacket manufacturer, seven out of fifteen manufacturers directly manufactured knit jackets in their own factory, while the manufacturing was comprised of 20% woven jackets and 80% knit jackets for all manufactures. Second, as for the type of yarn mostly used in knitting the fabric for the jackets, satin yarn and wool were used mostly for F/W with Plain and Half Milano rib stitches as the type of knit with a gauge of 12G and 7G. Third, as for the margin between the product size of the target brand and the size of the body at the time of designing a knit jacket pattern, the investigation of the actual state of manufacturing showed that the margin at the bust was B+4.8cm, the waist was W+6.9cm, and the hip girth was H+5cm. Therefore, the bust and hip girth of the knit jackets were designed to be smaller than those of the bust and hip girth lines of non-flexible woven jackets. On the contrary, the waist measurement of non-flexible woven jacket was designed to be smaller than the knit jacket. It was found that the side line of the knit jacket was expressed with greater give as compared to that of the non-flexible woven jacket.