• Asian Journal of Atmospheric Environment
• /
• 제4권1호
• /
• pp.9-19
• /
• 2010

The size distribution of airborne particulate matter (PM) and the concentrations of associated metallic elements were investigated in a busy urban region of a typical Korean industrial city. The PM concentrations measured during the spring, except for those in the size range of 1.1 to 2.1 ${\mu}m$, were slightly higher than the PM concentrations in the summer. Coarse particles contributed greatly to the variation in PM concentrations in the spring, while fine and submicron particles contributed largely to the variation in PM concentrations in the summer. The difference in size modes of the PM concentrations between spring and summer may be explained by the Asian dust effect and its accompanying wind direction and speed. Extremely high enrichment factors (EFs) values (6,971 to 60,966) for all of the size distributions in PM were identified for cadmium (Cd). High EFs values (12 to 907) were also identified for other heavy metals including Cr, Cu, Ni, Pb, Zn and Mn. Low EF values (0.29 to 8.61) were identified for Ca, K, Mg and Na. These results support the common hypothesis that most heavy metals in ambient PM have anthropogenic sources and most light metals have crustal sources. The results of principal components analyses and cluster analyses for heavy metals indicate that the principal sources of PM and metals were emissions from non-ferrous metal smelters, oil combustion, incinerators, vehicular traffic and road dust.

• 한국안전학회지
• /
• 제15권1호
• /
• pp.28-35
• /
• 2000

As huge energy transfer systems like a nuclear power plant, steam power plant and petrochemical plant are operated for a long time, mechanical properties are changed by degradation. The life time of the systems can be affected by the mechanical properties. So determination of the integrity of the metallic structure is required either to en4sure that failure will not occur during the service life of the components or to evaluate the lifetime extension of the structure. An automated ball indentation(ABI) method was developed as a non-destructive technique for evaluating the integrity of such metallic components. In this paper, we would like to present the aging evaluation technique by the ABI method. The five classes of the thermally aged CF8M specimens were prepared using an artificially accelerated aging method. After holding 100, 300, 900, 1800 and 3600 hours at 43$0^{\circ}C$, the specimens were cooled down using water to room temperature respectively. The tensile test, hardness test, charpy impact test, ABI test were performed. The results of the fracture test were compared with those of ABI test and the new evaluation technique of the integrity of metallic structures was developed.

• 한국주조공학회지
• /
• 제29권4호
• /
• pp.181-186
• /
• 2009

The interrelationship between new parameter ${\sigma}$ and maximum diameter $D_{max}$ is elaborated and discussed in comparison with four other glass forming ability (GFA) parameters, i.e. (1) super-cooled liquid region ${\Delta}T_x (=T_x - T_g)$, (2) reduced glass transition temperature $T_{rg} (=T_g/T_l)$, (3) K parameter $K (=[T_x-T_g]/[T_l -T_x])$, and (4) gamma parameter ${\gamma}(=[T_x]/[T_l+T_g])$ in Ca-based bulk metallic glass (BMG) systems. The ${\sigma}$ parameter, defined as ${\Delta}T^*{\times}P^'$, has a far better correlation with $D_{max}$ than the GFA parameters suggested so far, clearly indicating that the liquid phase stability and atomic size mismatch dominantly affect the GFA of Ca-based BMGs. Thus, it can be understood that the GFA of BMGs can be properly described by considering structural aspects for glass formation as well as thermodynamic and kinetic aspects for glass formation.

• 한국환경과학회지
• /
• 제25권5호
• /
• pp.715-726
• /
• 2016

This study investigates the characteristics of metallic and ionic elements concentration, concentration according to transport path, and factor analysis in $PM_{10}$ at Guducsan in Busan in the springtime of 2015. $PM_{10}$ concentration in Guducsan and Gwaebeopdong were $59.5{\pm}9.04{\mu}g/m^3$ and $87.5{\pm}20.2{\mu}g/m^3$, respectively. Contribution rate of water-soluble ions and secondary ion in $PM_{10}$ concentration in Guducsan were 37.0% and 27.8% respectively. [$NO_3{^-}/SO{_4}^{2-}$] ratio and contribution rate of sea salt of $PM_{10}$ in Guducsan and Gwaebeopdong were 0.91 and 1.12, 7.0% and 5.3%, respectively. The results of the backward trajectory analysis indicates that $PM_{10}$ concentration, total inorganic water-soluble ions and total secondary ions were high when the air parcels moved from Sandong region in China than non-Sandong and northen China to Busan area. The results of the factor analysis at Guducsan indicates that factor 1 was anthropogenic source effects such as automobile emissions and industrial combustion processes, factor 2 was marine sources such as sea salts from sea, and factor 3 was soil component sources.

• 한국표면공학회지
• /
• 제52권6호
• /
• pp.334-341
• /
• 2019

Organometal halide perovskite materials have attracted much attention in the photovoltaic and light emitting devices due to the compositional flexibility with AMX₃ formula (A is an organic amine cation; M is a metal ion; X is a halogen atom). The addition of homovalent or heterovalent metal cations to the bulk organohalide perovskites has been performed to modify their energy band structure and the relevant optoelectronic properties by ligand-assisted ball milling. Here, we report CH₃NH₃Pb_1-xM_xBr₃ nanocrystals substituted by metallic cations (M is Sn²⁺, In³⁺, Bi³⁺; x = 0, 0.01, 0.02, 0.05, 0.1, 0.2). Photoluminescence and quantum yield was significantly reduced with increasing metallic cations content. These quenching effect could be resulted from the metal cations that behave as a non-radiative recombination center.

• Bulletin of the Korean Chemical Society
• /
• 제33권3호
• /
• pp.763-769
• /
• 2012

We investigated the width (N) dependence on the magnetization of N-ZSiC NR with electron and hole doping on the basis of systematic DFT calculations. The critical values of the upper and down critical concentration to give the maximum and zero magnetic moment at edge Si/C atoms by electron/hole doping ($x_{up,e}$, $x_{down,e}$, $x_{up,h}$, and $x_{down,h}$) depend on the width of N-ZSiC NR. Moreover, due to $x_{up,e}\;{\neq}\;x_{up,h}$ and $x_{down,e}\;{\neq}\;x_{down,h}$, the electron and hole doping effect are asymmetry, i.e, the critical electron doping value ($x_{down,e}$) is smaller than the critical hole doping value ($x_{down,h}$) and is almost independent of the width of NZSiC NR though the other critical values of the electron and hole doping that influence the magnetization of N-ZSiC NR depend on the width. It was also found that at $x_{down,e}$ or $x_{down,h}$ doping, the N-ZSiC NR turns into unusual non-magnetic metallic state. The magnetic behavior was discussed based on the band structures and projected density of states (PDOS) under the effect of electron/hole doping.

• Carbon letters
• /
• 제28권
• /
• pp.60-65
• /
• 2018

Linear carbon chains (LCCs) encapsulated inside the hollow cores of carbon nanotubes (CNTs) have been experimentally synthesized and structurally characterized by Raman spectroscopy and transmission electron microscopy. However, in terms of electronic conductivity, their transportation mechanism has not been investigated theoretically or experimentally. In this study, the density of states and quantum conductance spectra were simulated through density functional theory combined with the non-equilibrium Green function method. The encapsulated LCCs inside (5,5), (6,4), and (9,0) single-walled carbon nanotubes (SWCNTs) exhibited a drastic change from metallic to semiconducting or from semiconducting to metallic due to the strong charge transfer between them. On the other hand, the electronic change in the conductance value of LCCs encapsulated inside the (7,4) SWCNT were in good agreement with the superposition of the individual SWCNTs and the isolated LCCs owing to the weak charge transfer.

• 에너지공학
• /
• 제26권4호
• /
• pp.1-6
• /
• 2017

본 연구는 수소-천연가스 혼합연료 차량에 사용되는 금속 및 비금속재료에 대한 수소영향을 평가하였다. 수소가 30% 혼합된 HCNG연료의 사용 조건(25MPa)에서 34CrMo강은 겨울철 조건에서는 수소 침투량이 0.0018ppm, 여름철 조건에서 5.3ppm으로 측정되었다. 일정하중시험(CLT)에 의한 임계 수소량이 1.03ppm으로 평가되어, 34CrMo 강은 HCNG 사용 조건에서 수소 취화에 의한 취성 파괴를 일으킬 수 있는 것으로 평가된다. 비금속재료에 대한 평가에서는 모든 재료가 시험 기준을 만족하였으나, Fluorocarbon 고무 재질의 경우 체적 변화가 크게 발생하여 사용에 각별한 주의가 요구된다.

• Elastomers and Composites
• /
• 제36권2호
• /
• pp.79-85
• /
• 2001

폐고무의 증가로 인하여 환경문제가 날로 심각해지고 있다. 그러므로 효율적인 재활용을 통하여 이러한 문제를 해결하는데 많은 연구가 진행되고 있다. 본 연구에서는 탈황시스템을 이용하여 폐고무 분말의 가황 결합을 분리함으로서 기본물성을 높이는데 목적을 두었다. 폐고무분말의 입자크기에 따른 물성의 변화와 De-link 함량 증가에 따른 물성을 조사하였고 De-link를 함유한 시료를 기존 배합물에 10phr 충전하여 유변학적, 기계적 및 가교도 등의 물성을 조사하였다. 또한 광학현미경을 사용하여 표면을 확인함으로서 제품특성을 연구하였다.

• 자원리싸이클링
• /
• 제9권4호
• /
• pp.56-62
• /
• 2000

본 연구에서는 하.폐수 처리를 효과적으로 할 수 있도록 각종 비금속 광물들을 혼합하여 부착성 및 토양 미생물의 활동을 촉진시킬 수 있게 광물 소결체를 이용한 합병정화조를 도입하여 주택용 소규모의 생활 하수를 발생원에서 바로 처리하기 위하여 단독주택 2가구를 대상으로 소규모형 무산소-호기 공정 합병정화조 실험 장치를 설치하여 실험하였다. 그 결과 COD.BOD의 방류수는 10mg/l 전후로 나타났고 총질소 (T-N)는 60~70% 정도까지 제거시킴으로 인해 외부에서 탄소원을 첨가하지 않고도 탈질을 할 수 있음을 확인 할 수 있었다. 또한 춤인(T-P)은 80%이상의 제거 효율을 나타내어 생물학적 처리 가능성을 확인할 수 있었다.