• Journal of Korean Society of Forest Science
• /
• v.113 no.1
• /
• pp.97-106
• /
• 2024

Evaluating carbon (C) and nitrogen (N) inputs from litterfall is important for soil nutrient management to enhance forest productivity and to understand the mechanisms of nutrient cycling in forest ecosystems. This study was conducted to compare C and N inputs from litterfall components of Cryptomeria japonica D. Don an d Chamaecyparis obtusa Endlicher planted in adjacent sites in the Jinju Research and Experimental Forests in Gyeongsangnam-do, South Korea. Litterfall into litter traps was collected at three-month intervals between December 2020 and December 2021, and the C and N concentrations of the litterfall components were measured. Litterfall amounts were not significantly different between the plantations, except for reproductive litterfall components. Litterfall accumulation peaked between December and March. The litterfall C concentration in the needle and seed litterfall was significantly higher for C. obtusa than for C. japonica. By contrast, the C concentrations in needle and flower litterfall differed seasonally. The mean N concentration of needle litterfall was significantly higher in C. japonica (0.96%) and C. obtusa collected between June and September (1.01%) than in the other seasons (C. japonica: 0.43%; C. obtusa: 0.53%). Carbon and N inputs in both plantations were highest in needle litterfall collected from December to March and lowest in needle litterfall collected from June to September. Annual C input by litterfall was similar between the plantations (C. japonica: 3,054 kg C ha^-1 yr^-1; C. obtusa: 3,129 kg C ha^-1 yr^-1), whereas total N input was higher for C. japonica (46.93 kg N ha^-1 yr^-1) than for C. obtusa (25.17 kg N ha^-1 yr^-1). The higher N input in the C. japonica plantation than in the C. obtusa plantation was associated with the input of reproductive components. These results could be applied to improve stand-scale models of C and N cycling by litterfall components in C. japonica an d C. obtusa plantations.

• Applied Biological Chemistry
• /
• v.24 no.3
• /
• pp.174-180
• /
• 1981

As the amount of pesticides consumption increases in agriculture, the side effects of pesticides on soil microorganisms have become an essential part in safety evaluation of pesticide for continued soil fertility. In order to establish the method of safety assessment of pesticides in Korea, a series of tests were carried out. Among the paddy pesticides Fujione (Isoprothiolane, fungicide), Ortran (Acephate, insecticide), and Machete (Butachlor, herbicide) were chosen and the effects of above three pesticides on Korean paddy soil microorganisms were studied. The measurements of pesticide effects on the cycling of carbon ($CO_2$ production), nitrogen fixation ($C_2H_2$ reduction), nitrification, and dehydrogenase activity were carried out. These measurements were complemented by evaluation of pesticide effects on viable microbial numbers. Although Fujione reduced the fungi numbers and inhibited nitrogen cycling activities somewhat, no significant adverse effects were show by any of the tested pesticides in our study.

• Journal of Korean Society of Forest Science
• /
• v.97 no.5
• /
• pp.492-500
• /
• 2008

Since vegetation significantly influences on soil carbon and nutrient storage, vegetation change has been focused on terrestrial carbon and nutrient cycling studies. In this study we investigated soil carbon and major nutrient capitals at the abandoned fields, which had different vegetation composition: a three year abandoned field ($AGR_3$), two ten years abandoned fields ($PD_{10}$ dominant with Pinus densiflora and Fraxinus rhynchophylla and $PM_{10}$ dominant with Populus maximowiczii), and an over sixty years forest ($FOR_{60}$). which were located at Hongcheon-gun, Kangwon-do, South Korea. Both main effects for organic matter (%) were significant: shallow soil > deep soil and $FOR_{60}=PM_{10}$ > $AGR_3=PD_{10}$. Nitrogen concentrations at $PM_{10}$ were the highest, while the lowest at $PD_{10}$. Available phosphorus concentrations were the highest at $PD_{10}$, which were over 10 times of site $FOR_{60}$ and $AGR_3$ at 0-10 cm soil depth. The average organic matter ($173Mg\;ha^{-1}$) and nitrogen contents ($10Mg\;ha^{-1}$) of $PM_{10}$ and $FOR_{60}$ were higher than those of $AGR_3$ and $PD_{10}$ by 57% and 42%, respectively. The available phosphorus contents above 30 cm mineral soil at $PD_{10}$ ($3.8Mg\;ha^{-1}$) and $PM_{10}$ ($1.3Mg\;ha^{-1}$) were over 120 times and 40 times more than at $FOR_{60}$. Calcium ($3.7Mg\;ha^{-1}$) and magnesium contents ($2.8Mg\;ha^{-1}$) at $FOR_{60}$ were twice or three times higher than at other sites. Organic matter amounts in 0-10 cm and 10-30 em soil had significant positive relationships with nitrogen, calcium, and magnesium contents, but not available phosphorus and potassium contents. This study could not identify the effect of chronological factor and vegetation composition on soil carbon and nutrient capital owing to diverse topography as well as limited study sites. However, this study suggests the accuracy of investigation for regional carbon and nutrient sequestration can be achieved by considering the period of abandoned time on the fields and the land use types. These results may suggest the benefits of forest restoration for soil carbon and nutrient accumulation in marginal agricultural lands in South Korea.

• Mycobiology
• /
• v.42 no.2
• /
• pp.132-139
• /
• 2014

Basidiomycetous macrofungi play important roles in maintaining forest ecosystems via carbon cycling and the mobilization of nitrogen and phosphorus. To understand the impact of human activity on macrofungi, an ongoing project at the Korea National Arboretum is focused on surveying the macrofungi in unexploited areas. Mt. Oseo was targeted in this survey because the number of visitors to this destination has been steadily increasing, and management and conservation plans for this destination are urgently required. Through 5 field surveys of Mt. Oseo from April to October 2012, 116 specimens of basidiomycetous macrofungi were collected and classified. The specimens were identified to the species level by analyzing their morphological characteristics and their DNA sequence data. A total of 80 species belonging to 57 genera and 25 families were identified. To the best of our knowledge, this is the first study to identify five of these species-Artomyces microsporus, Hymenopellis raphanipes, Pholiota abietis, Phylloporus brunneiceps, and Sirobasidium magnum-in Korea.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.3
• /
• pp.851-855
• /
• 2013

This paper describes an environmentally friendly process for the recovery of $LiFePO_4$ cathode materials from scrap electrodes by a simple thermal treatment method. The active materials were easily separated from the aluminum substrate foil and polymeric binders were also decomposed at different temperatures ($400^{\circ}C$, $500^{\circ}C$, $600^{\circ}C$) for 30 min under nitrogen gas flow. The samples were characterized by X-ray diffraction (XRD), scanning electronic microscopy (SEM), Raman spectroscopy, Thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). The electrochemical properties of the recycled $LiFePO_4$ cathode were evaluated by galvanostatic charge and discharge modes. The specific charge/discharge capacities of the recycled $LiFePO_4$ cathode were similar to those of the original $LiFePO_4$ cathode. The $LiFePO_4$ cathode material recovered at $500^{\circ}C$ exhibits a somewhat higher capacity than those of other recovered materials at high current rates. The recycled $LiFePO_4$ cathode also showed a good cycling performance.

• Journal of the Korean Society for Heat Treatment
• /
• v.7 no.2
• /
• pp.118-128
• /
• 1994

Five alloys were selected randomly in the composition range showing the best shape memory effect in Fe-Mn-Si system reported by Murakami. The shape memory effects of those alloys were mainly investigated through the training treatment which consisted of the repetition of 2% tensile deformation at room temperature and subsequent annealing at $600^{\circ}C$ above $A_r$ temperature. At the same deformation degress in rolling $600^{\circ}C$-annealing for 1 hr. showed the best shape memory effect, and 10%-deformation degrees represented maxima of the shpae memory effects at all annealing temperatures, $500^{\circ}C$, $600^{\circ}C$ and $700^{\circ}C$. The shape memory effects of the alloys were increased by increasing training cycle up to 5 cycles. This was because a large number of dislocations introduced by training process gave rise to increase in the austenite yield stress, and acted as nucleation sites for stress induced ${\varepsilon}$ martensite. The thermal cycling treatment, repetition of cooling in nitrogen at $-196{\circ}C$ and heating to $300^{\circ}C$ for 5 min., did not improve the shape memory effect.

• Journal of Forest and Environmental Science
• /
• v.40 no.1
• /
• pp.9-14
• /
• 2024

Quantitative evaluation of nutrient status and stoichiometry on the forest floor is a good indicator of litter quality in various vegetation types. This study was conducted to determine the effects of vegetation type on the nutrient concentration and stoichiometry of forest floors at a regional scale. Forest floor samples were collected from four vegetation types of evergreen coniferous forests including Cryptomeria japonica, Chamaecyparis obtusa, evergreen broadleaf, and bamboo spp. forests in southern Korea. The dry weight of the forest floor was higher in the C. japonica and C. obtusa forests than in the evergreen broadleaf and bamboo forests. The mean carbon (C) concentrations of the forest floor were highest in the broadleaf forest, followed by the bamboo forest, C. japonica and C. obtusa forests. Mean nitrogen (N) and phosphorous (P) concentrations in the the coniferous forests were lower than those in the broadleaf and bamboo forests. The mean C:N ratio was the highest in C. obtusa forest (118±25), followed by C. japonica (66±6), evergreen broadleaf (41±1), and bamboo (30±1) forests. However, C:P and N:P ratios were lower in the coniferous forests than in the broadleaf forest indicating that the stoichiometry of the forest floor varies across vegetation types. The C, N, and P stocks on the forest floor were higher in the C. obtusa forest than in the broadleaf or bamboo forests. These results highlight that vegetation type-dependent stoichiometric ratio is an useful indicator for understanding interspecific difference in quality and quantity of the forest floor.

• Korean Journal of Soil Science and Fertilizer
• /
• v.41 no.5
• /
• pp.354-361
• /
• 2008

In this study, we analyzed nutrient cycling structure of a small farm (cattle of 100 heads and arable lands of 2.5 ha) in Jeonnam province to investigate the effects of nutrients input by the addition of bedding materials (sawdust and rice hull) and nutrients loss before the application to the soils (the period during manure storage in the feedlot and composting process) on nutrient cycling structure. Sawdust and rice hull added as bedding materials increased N by 1.6% and 14.2% and $P_2O_5$ by 3.1% and 27.4%, respectively, relative to the amount of nutrients produced by excretion. This result suggests that the addition of nutrients via bedding materials should be considered for better estimation of nutrient balance. The most significant characteristics of the nutrient cycling structure was loss of mass and nutrients during the storage (21 days) and composting period (90 days). During this period, 78.4% of N and 9.5% of $P_2O_5$ was lost from sawdust compost; meanwhile, the percentages of loss for rice hull compost were 81.6% and 10.3%, respectively. A lower percentage of nutrients loss in sawdust compost than that in rice hull compost was attributed to the relatively slow decomposition rate of organic materials in the sawdust compost which has higher C/N ratio and lignin contents. Therefore, it was concluded that estimation of nutrient balance should be conducted based on nutrient contents in the final compost being applied to the lands rather than the amount of nutrients contained in the livestock excretion. In addition, the effects of bedding materials on nutrient losses should be also taken into account.

• Journal of Korean Society of Forest Science
• /
• v.88 no.2
• /
• pp.266-272
• /
• 1999

Aboveground biomass and nutrient contents of a 31-year-old pitch pine(Pinus rigida) and a 31-year-old Japanese larch(Larix leptolepis) plantations were measured in the Chungbu Forest Experiment Station, Kyunggi Province. Aboveground biomass was 170.2ton/ha in the pitch pine and 87.2ton/ha in the Japanese larch plantations. Aboveground biomass difference between both plantations was due to the difference of stand density. Aboveground biomass in both plantations was allocated as follows : stemwood>branch>stembark>needle. The concentrations of all nutrients(N, P, K, Ca, Mg) were generally higher in the Japanese larch needle than in the pitch pine because of high nutrient uptake characteristics of larch compared with pine tree species. The nutrient concentration in different tree tissues in both tree species decreased in the order of needle>branch>stembark>stemwood. Nutrient contents of aboveground biomass were : N, 335.9 ; P, 40.4 ; K, 121.4 ; Ca, 188.6 ; Mg, 93.8kg/ha in the pitch pine plantation, while nutrient contents in the Japanese larch plantation were : N, 226 ; P, 11.5 ; K, 72.9 ; Ca, 75.7 ; Mg, 37.1kg/ha. The nitrogen use efficiency calculated as the biomass produced by one unit of nitrogen was higher in the pitch pine than in the Japanese larch plantations. This result suggests that pine with high nitrogen use efficiency could be adapted in lower site productivity area compared with larch tree species.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.8
• /
• pp.172-177
• /
• 2014

We present on a threshold switching device based on AsGeTeSi material which is significantly improved by two $N_2$ processes: reactive $N_2$ during deposition, and $N_2$ plasma hardening. The introduction of N2 in the two-step processing enables a stackable and thermally stable device structure, is allowing integration of switch and memory devices for application in nano scale array circuits. Despite of its good threshold switching characteristics, AsTeGeSi-based switches have had key issues with reliability at a high temperature to apply resistive memory. This is usually due to a change in a Te concentration. However, our chalconitride switches(AsTeGeSiN) show high temperature stability as well as high current density over $1.1{\times}10^7A/cm^2$ at $30{\times}30(nm^2)$ celll. A cycling performance of the switch was over $10^8$ times. In addition, we demonstrated a memory cell consisted of 1 switch-1 resistor (1S-1R) stack structure using a TaOx resistance memory with the AsTeGeSiN select device.