• 한국수소및신에너지학회논문집
• /
• 제22권1호
• /
• pp.100-108
• /
• 2011

The use of biogas as an energy source reduces the chance of possible emission of two greenhouse gases, $CH_4$ and $CO_2$, into the atmosphere at the same time. Its nature of being a reproducible energy source makes its use even more attractive. This research if for the hydrogen production through the steam reforming of the biogas. The biogas utilized 3D-IR matrix burner in which the surface combustion is applied. The nickel catalyst was used inside a reformer. Parametric screening studies were achieved as Steam/Carbon ratio, biogas component ratio, Space velocity and Reformer temperature. When the condition of Steam/Carbon ratio, $CH_4/CO_2$ ratio, Space velocity and Refomer temperature were 3.25, 60%:40%, 19.32L/$g{\cdot}hr$ and $700^{\circ}C$ respectively, the hydrogen concentration and methane conversion rate were showed maximum values. Under the condition mentioned above, $H_2$ concentration was 73.9% and methane conversion rate was 98.9%.

• 한국응용과학기술학회지
• /
• 제10권2호
• /
• pp.57-63
• /
• 1993

This study investigated the reaction and variation of fatty acid composition of soybean oil when it is partially hydrogenated until its iodine value(IV) shifts from 134 to 110. Experment was conducted under he outlined reactiion conditions of temperatures(170, 190 and $210^{\circ}C$), pressure(1.3, 2.8 and 4.2atm) and nickel(Ni) catalyst concentraons(0.005, 0.01, 0.05, and 0.1%) with a fixed agitation(350rpm). Further investigation was also made to see the effect of added lecithin on hydrogenation. When reaction temperature was gradually raised and catalyst concentration increased, the content of linolenic acid progressively decreased while the increase amount of stearic acid reduced(P<0.05). On he other hand when pressure gradually increased, the contents of stearic acid and linolenic acid increased(P<0.05). Meanwhile when lecithin was added, reaction time increased by two to six times more than when no addition was made.

• 청정기술
• /
• 제19권1호
• /
• pp.51-58
• /
• 2013

니켈 촉매 상에서 에탄의 수증기 개질 반응과 수성가스 전환반응 반응에 대한 반응속도 데이터를 얻기 위하여 반응온도와 반응물의 분압을 변화시키면서 반응 실험을 수행하였다. 반응속도 데이터를 사용하여 거듭제곱 속도식 모델(power law kinetic model)과 랭미어-힌쉘우드 모델(Langmuir-Hinshelwood model)의 매개변수를 구하였다. 또한 반응 속도 모델식을 적용하여 PRO/II를 이용한 공정 모사를 통해서 에탄의 수증기 개질 반응기 사이징(sizing)을 수행하였다. 에탄을 반응물로 하여 수증기 개질 반응을 수행한 결과, 단순한 거듭제곱 속도식 모델보다 표면반응에 의하여 반응속도가 결정되는 랭미어-힌쉘우드 모델이 보다 적합하였고, 수성가스 전환반응에 대한 반응속도식은 거듭제곱 속도식 모델이 적합함을 보였다. PRO/II 시뮬레이션을 통해서 수소 생산량에 필요한 반응기의 크기를 결정할 수 있었다.

• 한국응용과학기술학회지
• /
• 제20권3호
• /
• pp.230-236
• /
• 2003

Synthesis gas is commercially produced by a steam reforming process. However, the process is highly endothermic and energy-consuming. Thus, this study was conducted to produce synthesis gas by the partial oxidation of methane to decrease the energy cost. Supported Ni catalysts were prepared by the impregnation method. To examine the activity of the catalysts, a differential fixed bed reactor was used, and the reaction was carried out at $750{\sim}850^{\circ}C$ and 1 atm. The fresh and used catalysts were characterized by XRD, XPS, TGA and AAS. The highest catalytic activity was obtained with the 13wt% Ni/MgO catalyst, with which methane conversion was 81%, and $H_2$ and CO selectivities were 94% and 93%, respectively. 13wt% Ni/MgO catalyst showed the best $MgNiO_2$ solid solution state, which can explain the highest catalytic activity of the 13wt% Ni/MgO catalyst.

• 대한환경공학회지
• /
• 제29권4호
• /
• pp.444-451
• /
• 2007

본 연구에서는 $\gamma-Al_2O_3$에 전이금속들을 함침시킨 촉매를 고정층 반응기에 충전시킨후 휘발성유기물질(VOCs)인 밴젠을 일정농도로 공급하면서 촉매산화 특성을 살펴보았다. 전이금속으로는 구리, 니켈, 망간, 철등을 포함해 8가지 금속을 선정하였고, 실험조건은 반응온도 $200\sim500^{\circ}C$, 벤젠의 농도 $1,000\sim3,000$ ppm, 공간속도 $5,000\sim60,000\;hr^{-1}$의 범위로 적용하였다. BET분석, 전자주사현미경(SEM), XRD분석을 통해 제조된 촉매의 물성을 조사하였으며, VOC 촉매산화반응의 전환율에 대하여 고찰하였다. 실험결과, VOC농도와 공간속도가 낮을수록 VOC산화반응의 전환율은 증가함을 알 수 있었다. 여러 전이금속촉매들 중에 Cu촉매가 벤젠에 대해 가장 높은 활성을 나타내었고, 소성온도 $500^{\circ}C$조건에서 전이금속의 함침율이 15 wt%일 경우 가장 높은 전환율을 나타내었다.

• 한국세라믹학회지
• /
• 제51권4호
• /
• pp.367-373
• /
• 2014

In this study, the reducing agent hydrazine and precipitator NaOH were used with $NiCl_2$ as a starting material in order to compound Ni-based material with spherical nano characteristics; resulting material was used as an anode for SOFC. Synthetic temperature, pH, and solvent amounts were experimentally optimized and the synthesis conditions were confirmed. Also, a 0 ~ 0.15 mole ratio of metal(Co, Fe) was alloyed in order to increase the catalyst activation performance of Ni and finally, spherical nano $Ni_{(1-x)}-M_{(x=0{\sim}0.15)}$(M = Co, Fe) alloy materials were compounded. In order to evaluate the catalyst activation for hydrocarbon fuel, fuel gas(10%/$CH_4$+10%/Air) was added and the responding gas was analyzed with GC(Gas Chromatography). Catalyst activation improvement was confirmed from the 3% hydrogen selectivity and 2.4% methane conversion rate in $Ni_{0.95}-Co_{0.05}$ alloy; those values were 4.4% and 19%, respectively, in $Ni_{0.95}-Fe_{0.05}$ alloy.

• 한국세라믹학회지
• /
• 제38권12호
• /
• pp.1162-1166
• /
• 2001

석유화학 공정 중 Styrene(SM) 공정에서 발생되는 산화철 폐촉매는 산업 폐기물로서 전량 매립되고 있는데, 이를 출발 원료로 사용하여 NiZn-페라이트를 합성하였고 그 자기적 특성을 조사하였다. 산화철 폐축매 펠렛을 분쇄한 후 NiO 및 ZnO를 혼합하여 90$0^{\circ}C$에서 하소하고 123$0^{\circ}C$에서 5시간 소결하여 스핀넬형 페라이트 소결체를 얻었다. N $i_{x}$ Z $n_{1-x}$F $e_2$ $O_4$(x=0.36, 0.50, 0.66)조성에 대하여 초투자율을 측정하였고, S-parameter를 측정하여 반사 감쇄량을 계산하였다. 산화철 폐촉매를 이용하여 X-band 주파수 영역에서 높은 전자파 흡수능을 갖는 전파흡수체를 제조할 수 있음을 확인하였다.다.

• Korean Chemical Engineering Research
• /
• 제56권6호
• /
• pp.914-920
• /
• 2018

본 연구에서는 상용 니켈-알루미나 촉매를 이용한 메탄가스-수증기 개질반응에서의 고유반응속도 상수를 결정하였다. 반응메커니즘을 반영하기 위해 Langmuir-Hinshelwood chemisorption 이론에 기반한 반응속도식을 사용하였고 반응온도($630{\sim}750^{\circ}C$) 및 반응물의 분압(S/C ratio = 2.7~3.5)을 실험변수로 설정하였다. 실험을 통해 얻어진 데이터를 기반으로 효율적인 최적화 알고리즘을 이용하여 최적 고유반응속도상수들을 결정하였다. 최종적으로 제안된 이 수학적 반응 모델은 촉매반응기의 설계 및 운전조건 최적화에 활용 가능하다.

• 한국결정성장학회지
• /
• 제21권3호
• /
• pp.119-123
• /
• 2011

Carbon nanotilaments (CNFs) could be synthesized on nickel catalyst layer-deposited silicon oxide substrate using $C_2H_2$ and$H_2$ as source gases under thermal chemical vapor deposition system. By the incorporation of $SF_6$ as a cyclic modulation manner, the geometries of carbon coils-related materials, such as nano-sized coil and wave-like nano-sized coil could be observed on the substrate. The characteristics (formation density and morphology) of as-grown CNFs with or without $SF_6$ incorporation were investigated. Diameter size reduction for the individual CNFs-related shape and the enhancement of the formation density of CNFs-related material could be achieved by the incorporation of $SF_6$ as a cyclic modulation manner. The cause for these results was discussed in association with the slightly increased etching ability by $SF_6$ addition and the sulfur role in SF 6 for the geometry change.

• Journal of Electrical Engineering and Technology
• /
• 제3권1호
• /
• pp.121-124
• /
• 2008

This paper presents the fabrication and field emission of carbon nanotube field emitters for a micro mass spectrometer. The carbon nanotube is an adequate material as a field emitter since it has good characteristics. We have successfully fabricated a diode field emitter and a triode field emitter. Each field emitter has been constructed using several micromachining processes and a thermal CVD process. In the case of the diode field emitter, to increase the electric field, the carbon nanotubes are selectively grown on the patterned nickel catalyst layer. The electron current of the diode field emitter is 73.2 ${\mu}A$ when the anode voltage is 1100V. That of the triode field emitter is 3.4 pA when the anode voltage is 1000V.