• The KIPS Transactions:PartC
• /
• v.13C no.5 s.108
• /
• pp.549-558
• /
• 2006

For activating home network, the security service is positively necessary and especially the access control supports secure home network services and differentiated services. But, the existing security technology for home network seldom consider access control or has a architecture to be dependent on specific middleware. Therefore, in this paper we propose a scheme to support integrated access control in home network to use XACML, access control standard of next generation, to have compatability and extensibility and we design and implement XACML access control system based on this. we also had m access control experiment about various policy to connect developed XACML access control system with the UPnP proxy based on OSGi in order to verify compatability with existing home network system.

• KIPS Transactions on Software and Data Engineering
• /
• v.6 no.7
• /
• pp.361-370
• /
• 2017

This paper proposes the architecture of test case generator that can generate test cases, considering feedback signals from subsystems controlled by an embedded system. In general, a closed system decides the next test input to its subsystem under its control referencing feedback signals from its subsystem. In such systems, it is hard to use the typical test cases generated without referencing feedback. The architecture proposed in this paper re-produces test cases in real time using feedback signals. The architecture is implemented and its effectiveness is verified through experimenting a demo system.

• Journal of Advanced Navigation Technology
• /
• v.10 no.1
• /
• pp.7-12
• /
• 2006

In this paper, we investigated performance for 5.8GHz dedicated short range communication system using OFDM which will be applied to Intelligent transportation system services. The maximum speed of a vehicle in DSRC channel is very fast as 180km/h, so a service time is very short to serve a various traffic information if hand-off is not occurred. Therefore higher bit rate is required to proved advanced and intelligent service to the drivers of various vehicle and the data transmission rate of the next generation DSRC system if being promoted over 10Mbps. The signals received in Racian channel have been simulated using the computer simulator. For performance improvement, BCH coding scheme are adopted.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.37 no.5
• /
• pp.117-124
• /
• 2000

As network security is coming up with significant problem after the major Internet sites were hacked nowadays, IDS (Intrusion Detection System) is considered as a next generation security solution for more trusted network and system security We propose the new IDS model which can detect intrusion in the expanded distribute environment in host level, drawback of existing IDS, and implement prototype. We used pattern extraction agent so that we extract automatically audit file needed in intrusion detection even in other Platforms.

• Journal of KIISE:Computing Practices and Letters
• /
• v.9 no.6
• /
• pp.602-609
• /
• 2003

Emerging high-speed next-generation Internet is enabling immersive media communication systems and applications to realize geographically distributed team collaborations while overcoming the limit of distance and time. Focusing on the reliable real-time delivery of 3D (i.e., stereo) video among corresponding parties, in this paper, key schemes for stereo video processing/display and reliable transport of stereo video packets over high-speed Internet are designed and implemented. The performance of proposed stereo video delivery system is evaluated both by emulating various network situations for quantitative comparison and by transmitting over real-world Internet up to the speed of around 100 Mbps. The results demonstrate the feasibility of the proposed system in supporting the desired immersive communication.

• Journal of Communications and Networks
• /
• v.11 no.4
• /
• pp.368-374
• /
• 2009

This paper focuses on a distributed multiple spectrum pricing scheme to maximize system capacity in next generation multiaccess systems, where multimode user equipments (MUEs) can connect simultaneously to multiple base stations (BSs) with multiple radio access technologies (RATs). The multi-price based scheme provides a distributed decision making for an optimal solution where radio resource allocations are determined by each MUE, unlike most centralized mechanisms where BS controls the whole radio resource. By the proposed optimal solution, MUEs can decide their share of spectrum bands and power allocation according to the spectrum price of each RAT, and at the same time the multiaccess system can achieve maximized total throughput. Numerical analysis shows that the proposed scheme achieves the maximal capacity by distributed resource allocation for the multiaccess system.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.3
• /
• pp.184-188
• /
• 2021

In general, digital signage is a next-generation smart media that provides various information and advertisement services to many people indoors or outdoors using the Internet. Recently, digital signage is rapidly spreading in such a small indoor environment, that is, in an area closely related to daily life, for example, inside an elevator. However, in this kind of indoor environment where the stay time of persons is extremely limited, it would be not easy for them to keep advertisements in the user memory for a long time. In the digital signage display installed in an indoor environment, it is possible to think about the possibility for a function such as expanding the screen to a user's smartphone, which is now widely spread, to contain, store, and use the transmitted content. In this paper, we propose a method to extend the display of digital signage contents to personal smart phones with interaction function in such a limited environment. In order to make the system operation, the proposed system was verified by confirming the result of dual screen implementation in a smart phone through the prototype implementation of a digital signage system in an embedded Linux environment.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.20 no.2
• /
• pp.209-229
• /
• 2022

This work provided a review of three techniques-(1) spectrochemical, (2) electrochemical, and (3) spectroelectrochemical-for molten salt medias. A spectroelectrochemical system was designed by utilizing this information. Here, we designed a spectroelectrochemical cell (SEC) and calibrated temperature controllers, and performed initial tests to explore the system's capability limit. There were several issues and a redesign of the cell was accomplished. The modification of the design allowed us to assemble, align the system with the light sources, and successfully transferred the setup inside a controlled environment. A preliminary run was executed to obtain transmission and absorption background of NaCl-CaCl₂ salt at 600℃. It shows that the quartz cuvette has high transmittance effects across all wavelengths and there were lower transmittance effects at the lower wavelength in the molten salt media. Despite a successful initial run, the quartz vessel was mated to the inner cavity of the SEC body. Moreover, there was shearing in the patch cord which resulted in damage to the fiber optic cable, deterioration of the SEC, corrosion in the connection of the cell body, and fiber optic damage. The next generation of the SEC should attach a high temperature fiber optic patch cords without introducing internal mechanical stress to the patch cord body. In addition, MACOR should be used as the cell body materials to prevent corrosion of the surface and avoid the mating issue and a use of an adapter from a manufacturer that combines the free beam to a fiber optic cable should be incorporated in the future design.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.5B
• /
• pp.498-508
• /
• 2009

In wireless mobile environments, large bandwidth and high QoS (Quality of Service) are recently required to support the increased demands for multimedia services. LTE (Long Term Evolution) is one of the promising solutions for the next generation broadband wireless access systems. To efficiently use downlink resource and effectively support QoS, packet scheduling algorithm is one of the important features in LTE system. In this paper, we proposed DAPS (Delay-Aware Packet Scheduling) algorithm to consider QoS requirements of delays for various traffic classes as well as channel condition and fairness. To reflect delay experiences at scheduling instance, DAPS observes how queue waiting time of packet is closed to maximum allowable delay. The simulation results show that the DAPS algorithm yields better performance for delay experience by increasing the number of transmitted packets with satisfying the required delay time compared with existing scheduling algorithms.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.93-97
• /
• 2000

In an era of very rapid technological change, standardization organizations have been confronted with the problem that they should develop more new and more complex standards as strategic tools for enforcement of competitive power in shorter time according to the reduction of Life Cycle of products and the increase in the number of standards and their complexity. To cope with this challenge, we introduce the functionalities and development directions for implementing standardization information system. Also this paper describes the architecture of the next generation system for standard information that enabling information sharing and exchanging using XML. Finally, we suggest implementation framework of Standardization Vortal Site for the One-stop service of integrated standards information which provide users with standards development roadmap and give brief introduction to SOL(Standards On-Line) site which is operated by ETRI/PEC.