• Nuclear Engineering and Technology
• /
• v.54 no.12
• /
• pp.4481-4490
• /
• 2022

In this study, a new rupture disk corrosion test (RDCT) method was developed for real-time detection of stress corrosion cracking (SCC) initiation of Alloy 600 in a primary water environment of pressurized water reactors. In the RDCT method, one side of a disk specimen was exposed to a simulated primary water at high temperature and pressure while the other side was maintained at ambient pressure, inducing a dome-shaped deformation and tensile stress on the specimen. When SCC occurs in the primary water environment, it leads to the specimen rupture or water leakage through the specimen, which can be detected in real-time using a pressure gauge. The tensile stress applied to the disk specimen was calculated using a finite element analysis. The tensile stress was calculated to increase as the specimen thickness decreased. The SCC initiation time of the specimen was evaluated by the RDCT method, from which result it was found that the crack initiation time decreased with the decrease of specimen thickness owing to the increase of applied stress. After the SCC initiation test, many cracks were observed on the specimen surface in an intergranular fracture mode, which is a typical characteristic of SCC in the primary water environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.9
• /
• pp.1854-1866
• /
• 1997

This paper proposes a new test case generation technique for a nondeterministic finite state machine by improving the existing UIO sequence generation method. First, a new conformance relationis defined, which is one of prerequisites for automatic test case generation. Because fof the nondeterministic property of torpocols, the output of the systems under test is not known deterministically to the tester. Therefore, tree-like test case generation method is introduced for adaptive testing, in which the next input is selected after observing the previous output. Since the test cases are generated with regarding the inputs and outputs as separate events and are represented in tree notation, the test cases are easily converted into TTCN, the international standard test suite specification language.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2001.03a
• /
• pp.49-56
• /
• 2001

The techniques to make assessment of the structural integrity of underground structures include Infrared thermagraphy, GPR using the reflection of the electromagnetic wave, ultrasonic test, seismic methods using the propagation of elastic wave, and etc These methods have pros and cons in the assessment of the structural integrity in the complex environment of the underground structure, so that a single method alone is not enough to evaluate parameters required for the assessment. In this study, a new seismic method was proposed to improve the existing methods and to provide an additional information like stiffness of concrete. The proposed method combines the advantages of the modified impact-echo test and the SASW method. To verify the validity of the proposed method, a large scale model of a tunnel concrete liner was built and the proposed method was applied to the center of the model and also to the corner of the model which has several distinct reflection boundaries.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.1
• /
• pp.55-60
• /
• 2022

This study conducted the measurements of air flow rate for blower systems with experiment and numerical. A new airflow rate test method is suggested, with which it is possible to accurate measurements and calculate the air flow rate for blower systems. The blower(axial fan) is an industrial fluid machine device that supplies a large amount of air by driving an impeller with an electric motor, and it is widely used throughout the industry such as steel, power plant, chemical, semiconductor, LC D, food, and cement. The airflow from the blower is for exchanging the heat in the cooling unit or heat exchanger. The temperature of coolants and hydraulic oil primarily depends on the amount of airflow rate through the cooling package so its accurate estimation is very important. Moreover, it required a larger investment in time and cost since it could not be executed until the system is actually made. Therefore, this research is intended to examine the phenomenon of air flow pattern when testing air flow rate, suggested new test method, and show the result of the validation test.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1972-1975
• /
• 2002

A new test approach based on a supply current test method is proposed for testing open faults in bipolar logic circuits. In the approach, only the open faults are detected by the supply current test method, which are difficult to be detected by functional test methods. The effectiveness of the approach is examined experimentally on open fault detection in TTL combinational circuits. The results shows that higher fault coverage can be established by applying a small number of test input vectors of the supply current test method after test vectors of functional test methods based on stuck-at models.

• Journal of Information Display
• /
• v.12 no.2
• /
• pp.85-87
• /
• 2011

The contrast ratio is one of the most important performance parameters for display devices. The general method of measuring the contrast ratio is to determine the ratio of the full-screen white pattern to the full-screen black pattern, according to the Video Electronics Standards Association standard. Real TV images seldom have these images, however, and the conventional method does not reflect the true performance of the display in actual use. In this paper, a new contrast ratio measurement method that uses image patterns is proposed, to demonstrate that active matrix organic light-emitting diode TVs have a higher contrast than LED (LCD) TVs.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.262-267
• /
• 2004

The unloading compliance method is the most commonly used method to evaluate the fracture resistance characteristics of a material. In dynamic loading condition, the direct current potential drop(DCPD) method has been used because the unloading compliance method can not be applied due to the discontinuity of loading. However, even in the dynamic test using DCPD method, there is a problem that the voltage drops sharply on the initiation of crack. For the reason metioned above, the normalization method was suggested on ASTM E 1820 which is revised recently, as a new method to evaluate the dynamic fracture resistance characteristic. The nomalization method can be used to obtain a fracture resistance curve directly from a load-load line displacement. In this study, we obtained two fracture resistance curves from static test of welding part of nuclear piping both by unloading compliance and nomalization method. The two curves were almost same each other, so the adaptability of the nomalization method has been proved. We conducted a dynamic fracture resistance test for the same material. The fracture resistance curve from the dynamic test was obtained by normalization method and compared to that of the static test result.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.1069-1072
• /
• 1998

Recently the development of design and automation technology and manufacturing method, has reduced the cost of chip, but it becomes more difficult to test IC chip because test technique doesn't keep up with these techniques. In case of IC testing, obtaining test vectors to be able to detect good chip or bad one is very important, but according to increasing complexity, it is very complex and difficult. Another problem is that during testing, there could be capability of physical and electrical damage on chip. Also there is difficulty in synchronization between CUT (circuit under test) and Test equipment〔1〕. Because of these difficulties, built in self test has been proposed. Not only obtaining test vectors but also reducing test time becomes hot issues nowadays. This paper presents a new test BIST(built in self test) method. Proposed BIST implementation reduces test time and obtains high fault coverage. By searching internal nodes in which are inserted test_point_cells〔2〕and allocating TPG(test pattern generation) stages, test length becomes much shorter.

• Journal of applied mathematics & informatics
• /
• v.38 no.5_6
• /
• pp.519-532
• /
• 2020

In this paper, we first propose a new total variation-based regularization model for image restoration. We next propose a fixed-point-like method for solving the new image restoration model, and then we provide convergence analysis for the fixed-point-like method. To evaluate the feasibility and efficiency of the fixed-point-like method for the new proposed total variation-based regularization model, we provide numerical experiments for several test problems.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.4
• /
• pp.84-91
• /
• 2010

Owing to revolutionary developments in automobile technologies, a variety of advanced vehicles - hybrid vehicle, hydrogen fuel-cell vehicle, electric vehicle, etc. - emerges recently. The safety is getting more important for developing automobiles. The electro-magnetic compatibility has to be assured, since those advanced vehicles are equipped with various new electronic systems. Electro-magnetic compatibility tests, in general, consist of an EMI(electro-magnetic interference) test and an EMS (electro-magnetic susceptibility) test. We investigated the susceptibility test method suggested in KMVSS (Korean Motor Vehicle Safety Standard) as the EMS test method. A series of experiments results that the above test method should be partially revised to comply with a Korean governmental standard method. In this paper, the some directions of modifications are presented to enhance the quality of the above EMS test method.