• 제목/요약/키워드: new technology.

검색결과 30,314건 처리시간 0.073초

The Main Contents and Task in Future for the Air Transport Law Established Newly in the Korean Revised Commercial Law

  • 김두환
    • 항공우주정책ㆍ법학회지
    • /
    • 제27권1호
    • /
    • pp.75-101
    • /
    • 2012
  • As the Reublic of Korea revised the Commercial Code including 40 articles of air transport enacted newly on May 23, 2011, so Korea became first legislative examples in the Commercial Code of the developed and developing countries. I would like to explain briefly the main contents of my paper such as (1) history of enacting newly Part VI (air transport) in the Korea's revised commercial law, (2) legal background enacting newly Part VI (air transport) in the Korea's revised commercial law and the problems on the conditions of air transport, (3) every countries' legislative examples on the civil liability of aircraft's operator, (4) unlawful Interference Convention and general risk convention of 2009, (5) main contents and prospects of the revised Commercial Code for the liability of aircraft's operator etc as the followings. Meanwhile as the Aviation Act, Commercial Code and Civil Code in Korea and Japan did not regulated at all the legal basis of solution on the disputes between victims and offender for the amount of compensation for damage due to personal or property damage caused by aircraft accidents in Korea and Japan, so it has been raised many legal problems such as protection of victims, standard of decision in trial in the event of aircraft accident's lawsuit case. But the Korean Revised Commercial Code including Part VI, air transport regulations was passed by the majority resolution of the Korean National Assembly on April 29, 2011 and then the South Korean government proclaimed it on May 23 same year. The Revised Commercial Code enforced into tothe territory of the South Korea from November 24, 2011 after six month of the proclaimed date by the Korean Government. Thus, though Korean Commercial Code regulated concretely and respectively the legal relations on the liability of compensation for damage in the contract of transport by land in it's Part II (commercial activities) and in the contract of transport by sea in its Part V (marine commerce), but the Amended Commercial Act regulated newly 40 articles in it's Part VI (air transport) relating to the air carrier's contract liability on the compensation for damage caused by aircraft accidents in the air passengers and goods transport and aircraft operator's tort liability on compensation for damage caused by the sudden falling or collision of aircraft to third parties on the surface and so it was equipped with reasonable and unified system among the transport by land, marine and air. The ICAO adopted two new air law conventions setting out international compensation and liability rules for damage caused by aircraft to third parties at a diplomatic conference hosted by it from April 20 to May 2, 2009. The fight against the effects of terrorism and the improvement of the status of victims in the event of damage to third parties that may result either from acts of unlawful interference involving aircraft or caused by ordinary operation of aircraft, forms the cornerstone of the two conventions. One legal instrument adopted by the Conference is "the Convention on Compensation for Damage to Third Parties, Resulting from Acts of Unlawful Interference Involving Aircraft" (Unlawful Interference Convention). The other instrument, "the Convention on Compensation for Damage Caused by Aircraft to Third Parties" (General Risk Convention), modernizes the current legal framework provided for under the 1952 Rome Convention and related Protocol of 1978. It is desirable for us to ratify quickly the abovementioned two conventions such as Unlawful Interference Convention and General Risk Convention in order to settle reasonably and justly as well as the protection of the South Korean peoples.

  • PDF

지식이전 선행요인에 관한 다차원 분석: 사회적 자본 이론과 사회연결망 이론의 결합 (Multi-level Analysis of the Antecedents of Knowledge Transfer: Integration of Social Capital Theory and Social Network Theory)

  • 강민형;허용석
    • Asia pacific journal of information systems
    • /
    • 제22권3호
    • /
    • pp.75-97
    • /
    • 2012
  • Knowledge residing in the heads of employees has always been regarded as one of the most critical resources within a firm. However, many tries to facilitate knowledge transfer among employees has been unsuccessful because of the motivational and cognitive problems between the knowledge source and the recipient. Social capital, which is defined as "the sum of the actual and potential resources embedded within, available through, derived from the network of relationships possessed by an individual or social unit [Nahapiet and Ghoshal, 1998]," is suggested to resolve these motivational and cognitive problems of knowledge transfer. In Social capital theory, there are two research streams. One insists that social capital strengthens group solidarity and brings up cooperative behaviors among group members, such as voluntary help to colleagues. Therefore, social capital can motivate an expert to transfer his/her knowledge to a colleague in need without any direct reward. The other stream insists that social capital provides an access to various resources that the owner of social capital doesn't possess directly. In knowledge transfer context, an employee with social capital can access and learn much knowledge from his/her colleagues. Therefore, social capital provides benefits to both the knowledge source and the recipient in different ways. However, prior research on knowledge transfer and social capital is mostly limited to either of the research stream of social capital and covered only the knowledge source's or the knowledge recipient's perspective. Social network theory which focuses on the structural dimension of social capital provides clear explanation about the in-depth mechanisms of social capital's two different benefits. 'Strong tie' builds up identification, trust, and emotional attachment between the knowledge source and the recipient; therefore, it motivates the knowledge source to transfer his/her knowledge to the recipient. On the other hand, 'weak tie' easily expands to 'diverse' knowledge sources because it does not take much effort to manage. Therefore, the real value of 'weak tie' comes from the 'diverse network structure,' not the 'weak tie' itself. It implies that the two different perspectives on strength of ties can co-exist. For example, an extroverted employee can manage many 'strong' ties with 'various' colleagues. In this regards, the individual-level structure of one's relationships as well as the dyadic-level relationship should be considered together to provide a holistic view of social capital. In addition, interaction effect between individual-level characteristics and dyadic-level characteristics can be examined, too. Based on these arguments, this study has following research questions. (1) How does the social capital of the knowledge source and the recipient influence knowledge transfer respectively? (2) How does the strength of ties between the knowledge source and the recipient influence knowledge transfer? (3) How does the social capital of the knowledge source and the recipient influence the effect of the strength of ties between the knowledge source and the recipient on knowledge transfer? Based on Social capital theory and Social network theory, a multi-level research model is developed to consider both the individual-level social capital of the knowledge source and the recipient and the dyadic-level strength of relationship between the knowledge source and the recipient. 'Cross-classified random effect model,' one of the multi-level analysis methods, is adopted to analyze the survey responses from 337 R&D employees. The results of analysis provide several findings. First, among three dimensions of the knowledge source's social capital, network centrality (i.e., structural dimension) shows the significant direct effect on knowledge transfer. On the other hand, the knowledge recipient's network centrality is not influential. Instead, it strengthens the influence of the strength of ties between the knowledge source and the recipient on knowledge transfer. It means that the knowledge source's network centrality does not directly increase knowledge transfer. Instead, by providing access to various knowledge sources, the network centrality provides only the context where the strong tie between the knowledge source and the recipient leads to effective knowledge transfer. In short, network centrality has indirect effect on knowledge transfer from the knowledge recipient's perspective, while it has direct effect from the knowledge source's perspective. This is the most important contribution of this research. In addition, contrary to the research hypothesis, company tenure of the knowledge recipient negatively influences knowledge transfer. It means that experienced employees do not look for new knowledge and stick to their own knowledge. This is also an interesting result. One of the possible reasons is the hierarchical culture of Korea, such as a fear of losing face in front of subordinates. In a research methodology perspective, multi-level analysis adopted in this study seems to be very promising in management research area which has a multi-level data structure, such as employee-team-department-company. In addition, social network analysis is also a promising research approach with an exploding availability of online social network data.

  • PDF

재사용 플러그 상토의 이화학적 특성 및 재사용 상토가 토마토와 오이의 묘소질에 미치는 영향 (Physico-chemical Characteristics of used Plug Media and its Effect on Growth Response of Tomato and Cucumber Seedlings)

  • 변효증;김영식;강호민;김일섭
    • 생물환경조절학회지
    • /
    • 제21권3호
    • /
    • pp.207-212
    • /
    • 2012
  • 현재 국내에서 농가에 보급되는 플러그 묘중 가지과 작물의 토마토와 박과작물의 오이, 참외, 수박은 평균 70% 이상이 연작에 의한 토양전염성 병해를 회피할 목적 등으로 접목육묘를 한다. 접목작업 후 대목 또는 접수용으로 사용된 상토의 일부는는 전량 폐기되는데 이를 재사용하려는 시도가 일부 육묘장에서 이루어지고 있으나 대목용으로 사용되었던 상토는 병발생 위험성은 물론 물리성과 화학성이 신규상토와 달라 육묘 관리에 많은 문제점이 상존하고 있다. 따라서, 본 연구는 시판용 상토(NPM)와 과채류 대목용으로 1회 사용한 후에 재사용을 위해 증기 소독된 상토(UPM)의 이화학적 특성과 이들 상토가 과채류 묘소질에 미치는 영향을 조사하여 플러그 상토의 재활용을 위한 기초자료를 얻고자 수행하였다. 토양삼상계를 이용하여 고상용적, 기상용적, 입자밀도, 공극율, 용적밀도 등 상토의 물리적 특성을 조사하였고, 화학적 특성은 토양분석기를 이용하여 $NO_3$-N, $P_2O_5$, K, Mg, Ca, $SiO_2$, CEC, 유기물 함량 등을 조사하였다. 상토의 이화학적 특성을 비교한 결과 UPM이 NPM보다 공극율은 25%, 보수력은 15% 정도 낮았으나, 용적 및 입자밀도는 2배 이상 높아 단위 용적당 상토무게도 2.5배 무거운 것으로 나타났으며, pH와 EC는 유의적 차이를 보이지 않았으나, 양이온치환능력은 재사용 상토가 40% 정도 낮았다. 오이와 토마토 재배 결과 신규 상토에 비해 재사용 상토의 무기이온의 흡수능력과 묘소질이 전반적으로 불량하여 육묘상토의 재활용을 위해서는 재사용 상토의 물리성을 개선하기 위한 조치가 필요하다고 판단되었다.

전문가 제품 후기가 소비자 제품 평가에 미치는 영향: 텍스트마이닝 분석을 중심으로 (The Effect of Expert Reviews on Consumer Product Evaluations: A Text Mining Approach)

  • 강태영;박도형
    • 지능정보연구
    • /
    • 제22권1호
    • /
    • pp.63-82
    • /
    • 2016
  • 최근 정보기술의 발달로 인해 소비자들은 온라인상에서 많은 정보를 쉽고 빠르게 획득할 수 있다. 소비자가 제품 구매시에는 소비자들이나 전문가들이 작성한 제품 후기 정보를 주로 탐색한다. 기존의 연구들이 소비자들이 창출한 제품 후기 중심으로 주로 진행되어 왔기 때문에, 전문가 제품 후기의 영향력에 대해서는 상대적으로 소수의 연구들만 존재하고 있다. 본 연구는 전문가가 생성하는 제품 후기에 초점을 맞추어, 방대한 실제 비정형데이터인 전문가의 후기를 어떻게 언어학적인 차원과 심리학적인 차원으로 나눌 수 있는지의 방법론을 제안하며, 실제 전문가 제품 후기를 사용하여 의미 있는 다섯 가지 차원의 새로운 변수들을 도출하였다. 그 결과 소비자들이 전문가 후기에서 반응하고 있는 언어적 특성은 제품에 대한 깊이 있는 정보의 양이나 충분한 설명을 나타내는 변수인 Review Depth, 그리고 전문가가 기술하는 방식이 제품에 대한 확신이 없는 듯한 말투를 나타내는 변수인 Lack of Assurance는 소비자의 전반적인 제품평가에 유의한 상관관계가 있는 것으로 밝혀졌다. 또한, 제품에 대한 칭찬이나 긍정적인 면을 서술하는 방식인 Positive Polarity가 소비자의 제품 평가에 영향을 미치지 않았지만, 전문가가 하는 제품에 대한 비관적인 평가인 Negative Polarity는 소비자들의 평가와 유의한 음의 상관관계가 있었다는 점이다. 전문가가 스토리텔링 관점에서 자주 사용하는 Social Orientation 특성은 유의한 관계를 미치지 못함이 밝혀졌다. 본 연구는 새로운 방법론을 제안하고 이를 실제로 활용한 결과를 보여준다는 차원에서 이론적이고 실무적인 공헌을 가진다.

3-Azidopropane-1,2-diol로 쇄연장된 GAP/PTMG 폴리우레탄의 상거동 (Phase Behaviors of the GAP/PTMG Polyurethanes Chain Extended with 3-Azidopropane-1,2-Diol)

  • 김형석;유종성;권정옥;김정수;이동선;노시태;장영욱;김동국;권순길
    • 공업화학
    • /
    • 제21권4호
    • /
    • pp.377-384
    • /
    • 2010
  • 에너지 함유 쇄연장제인 3-azidopropane-1,2-diol (AzPD)로 쇄연장된 에너지 함유 폴리우레탄의 특성을 고찰하기 위하여 비교연구법을 수행하였다. 이를 위하여 AzPD, 1,4-BD, 또는 1,5-PD 쇄연장제를 갖는 poly(glycidyl azide)/poly(tetramethylene oxide)계 에너지 함유 세그멘티드 폴리우레탄(energetic segmented polyurethane, GAP/PTMG ESPU)을 dimethyl formamide (DMF) 용매에서 합성하여 상거동을 고찰하였다. 상거동은 fourier transform infrared.attenuated total reflection spectroscopy (ATR FT.IR), differential scanning calorimetry (DSC), 및 dynamic mechanical analysis (DMA)를 이용하여 분석하였다. ATR FT.IR spectrum 분석결과 7일 경과 시편의 GAP/PTMG AzESPU의 수소결합하지 않은 C=O 분율이 0.5로 각각 0.44 및 0.41인 GAP/PTMG BDESPU 및 GAP/PTMG PDESPU 보다 높았고, 제조 후 60일 경과 시편의 경우 0.26~0.29의 범위로 큰 차가 없었다. 제조 후 7일 경과 GAP/PTMG AzESPU 시편의 DMA curves는 무정형 고분자의 거동과 유사하였으며, GAP/PTMG BDESPU과 GAP/PTMG PDESPU는 고무평탄구간과 연성 흐름 구간을 갖는 점탄성 거동을 나타냈다. 그러나, 제조 후 60일 경과 GAP/PTMG AzESPU의 DMA curves는 GAP/PTMG PDESPU와 같이 고무평탄구간과 연성 흐름 구간을 갖는 점탄성 거동을 나타냈다. ATR FT-IR, DSC 및 DMA 분석을 이용한 상거동 고찰로부터 AzPD로 쇄연장된 GAP/PTMG ESPU는 1,4-BD 또는 1,5-PD로 쇄연장된 GAP/PTMG ESPU보다 구성성분간의 상혼합이 잘 이루어지나 적절한 조건에서 상형평에 도달되면 GAP/PTMG PDESPU와 유사한 TPE의 점탄성 거동을 나타냈다.

지역산업 육성정책에 대한 고찰 (Studies on Development Policies for Regional Industry)

  • 김동수;이두희;김계환
    • 한국경제지리학회지
    • /
    • 제14권4호
    • /
    • pp.467-485
    • /
    • 2011
  • 우리나라는 한국전 이후 세계 경제를 따라잡기 위하여 수도권과 동남권 일부 지역을 중심으로 경제개발 정책을 추진하여 왔다. 그 결과 수도권과 비수도권 간의 지역격차가 점차 커지게 되었고 문민정부의 출범 이후 지방자치제의 도입과 함께 비수도권 지역에서 해당지역의 발전에 대한 관심을 갖기 시작하였다. 국민정부의 출범과 동시에 4개(부산, 대구, 경남, 광주) 지자체에서 지역산업 진흥사업을 추진하기에 이르렀고 이것이 지역정책의 출발점 되었다. 이후 참여정부에서는 지역정책의 기반을 마련하였다. 국가균형발전을 실현하기 위하여 국가균형발전특별법 제정, 국가균형발전특별회계 신설, 국가균형발전 위원회 설립 및 국가균형발전5개년계획 수립 등 일련의 제도적 기반을 구축하였다. 지역산업 육성을 위하여 기존의 4개 지역 외에 9개 지역을 추가하여 4+9의 전략산업 육성사업을 추진하였다. 이후 현 정부에서는 세계적인 지역정책의 변화에 맞추어 보다 효율적인 정책집행을 위하여 획일적인 균형보다 지역경쟁력 강화로 정책목표를 수정하였고 지역정책의 공간범주 또한 규모의 경제에 맞게 초광역개발권, 광역경제권, 기초생활권으로 구분하여 차별화된 정책을 추진하였으며, 지방분권 강화를 위하여 포괄보조금 성격의 예산을 늘였다. 지역산업을 육성하기 위하여 광역경제권 수준에서 선도산업 육성사업, 시도 수준에서는 전략산업 육성사업, 기초생활권에서는 지역특화산업 육성사업을 추진하여 미래의 성장동력 확보 및 지역경제 활성화를 도모하였다. 이러한 지역정책의 중심에는 지식경제부가 주도적인 역할을 수행하고 있으며, 산업 육성을 통한 지역발전을 추진하고 있다는 점에서 다른 나라와는 차이를 보이고 있다. 이제 지역산업 육성으로 시작된 지역정책이 어느덧 13여년이 되어 정책의 성과를 바탕으로 정책 방향이나 추진전략을 되짚어 볼 때가 되었다. 본 연구는 그 동안 추진되어 온 지역산업 육성정책을 전체적으로 검토하고 향후의 정책 수립을 위하여 문제점과 수정보완 방향에 대하여 정리하였다. 우선 2012년과 2013년에 종료되는 선도산업과 전략산업 육성사업의 재편이 검토 중에 있다. 두 사업에서 선정한 산업들의 중복은 물론 지원프로그램 간의 중복 등의 문제가 표출되었기 때문이다. 또한, 단순한 기술개발 지원 등과 같은 재정보조보다는 산업생태계 구축 등 간접적이지만 기업의 자생력을 강화할 수 있는 지원 방안이 필요하다. 마지막으로 부처별로 분할된 각각의 부문별 정책이 아닌 지역산업정책 추진 주체간의 원활한 소통을 바탕으로 하는 포괄적인 지역산업 육성 정책을 마련하여야 할 것이다.

  • PDF

찰옥수수쌀의 품종별 이화학특성 및 취반특성 (Comparison on Physicochemical and Cooking Properties of Milled Kernel in Waxy Corn Hybrids)

  • 이유영;이춘기;이진석;김미정;김선림;김율호;박향미;김욱한;권영업;김성국
    • 한국작물학회지
    • /
    • 제58권4호
    • /
    • pp.424-431
    • /
    • 2013
  • 본 연구에서는 밥밑용 잡곡으로 이용하기 위한 찰옥수수를 도정하여 이화학특성 및 취반특성에 관련된 연구를 수행하여 얻어진 결과를 보고하고자 한다. 1. 도정수율은 유색 찰옥수수인 흑진주찰, 미흑찰, 얼룩찰이 다른 품종에 비해 상대적으로 높았으며, 백색 찰옥수수 품종에서는 찰옥4호, 일미찰, 연농1호가 높았다. 2. 도정 전 후의 색차변화를 측정하였을 때 도정 후 모든 품종의 L 값은 증가하고 a값은 백색 찰옥수수 품종에서는 감소하지만, 유색 찰옥수수 품종에서는 전체적으로 증가하는 경향을 보였으며, 흑진주찰은 도정 후 L, a값이 가장 낮았다. 3. 옥수수쌀의 안토시아닌 색소함량을 측정하였을 때 흑진주찰은 $154.1{\mu}g/g$, 얼룩찰1호는 $42.5{\mu}g/g$ 함유되어 있었다. 4. 옥수수쌀 전분의 호화양상을 측정하였을 때 연농1호, 미흑찰은 호화개시온도가 가장 낮았으며, 연농1호, 흑진주찰, 미흑찰은 최종점도와 치반점도가 낮고, 상대적으로 강하점도가 높아 호화특성이 양호한 것으로 나타났다. 5. 취반 후 연농2호, 미흑찰, 흑진주찰이 다른 품종에 비해 수분흡수율, 퍼짐성이 높고, 연농2호, 연농1호, 미백2호, 흑진주찰, 얼룩찰이 다른 품종에 비해 경도값이 낮았다. 6. 취반 후 식미평가에서 흑진주찰> 미흑찰> 흑점2호 순으로 높은 기호성을 보였다. 7. 종합적인 결과를 바탕으로 흑진주찰, 연농2호, 미흑찰 품종이 취반용 옥수수쌀로 알맞은 특성을 가지는 것으로 나타났다.

성락원 영벽지의 원형 파악을 위한 3D 스캔기술 연구 (A Study on 3D Scan Technology for Find Archetype of Youngbeokji in Seongnagwon Garden)

  • 이원호;김동현;김재웅;박동진
    • 한국전통조경학회지
    • /
    • 제31권3호
    • /
    • pp.95-105
    • /
    • 2013
  • 본 연구는 성락원(명승 제35호) 영벽지 공간의 원형 파악을 목적으로 주변지형을 포함한 3D 정밀데이터 취득을 통해 연못부 지반의 원형 추정을 한 결과, 다음과 같은 결론을 얻었다. 첫째, 영벽지 석구조물에 대한 용도 및 구조를 살피는 것은 이전의 형태를 밝히는데 단서가 될 것이라 판단되며, 3D 스캔방법의 적용은 주변지형을 포함한 전체적 구조를 살피는데 용이하였다. 둘째, 실측결과, 조사대상 암반부는 남북으로 7,665mm 동서로 7,326mm의 규모를 지니며, 석구조물은 $1,665mm{\times}1,721mm$의 정방형을 이루고, 그 내부에는 지름이1,664mm 반구형이며, 기단 아랫부분에는 암석이 남북 $1,006mm{\times}328mm$규모로 떨어져 나간 흔적이 발견되었다. 셋째, 영벽지 내부의 지형을 기록함에 있어 다중해상도 방식을 사용하여 광대역스캐너를 이용한 스캔작업 후 스캔데이터를 정합하여 Polygon Data로의 변환과정을 거친 후, 이를 정밀스캔데이터와 병합하여 메쉬데이터로 변환하는 과정을 거쳤다. 그리고 해상도 사진과 3차원 지형데이터를 오버랩하여 작성하였다. 넷째, 이 작업의 결과로 석구조물 서측에 회유하는 경사진 암반부 물길이를 확인되었으며, 방지원도형의 석지로 추정되는 수경시설물의 하부구조가 확인되어 암반부에 인공적으로 음각한 것임을 확인하였다. 본 연구를 통해 1960년대 이전의 지형과 상황을 비교연구할 수 있는 토대를 생성하였다. 더불어 입체적 정밀실측데이터의 취득과 함께 발굴 당시의 원형을 디지털상에서 영구보존할 수 있게 되었다. 향후, 이 데이터는 다양한 전문가의 고증을 거쳐 영벽지 석구조물의 용도 및 보존관리방안을 수립할 기초자료로 사용될 것이다. 또한 금번 연구에서 밝혀진 3D 실측의 용이성이 정원연구에 다양하게 활용되어지길 기대한다.

CFST의 D/t 제한모델들에 대한 신뢰성해석에서 모델링불확실성을 해결하는 선택적 방법 (An Alternative Perspective to Resolve Modelling Uncertainty in Reliability Analysis for D/t Limitation Models of CFST)

  • 한택희;김정중
    • 한국전산구조공학회논문집
    • /
    • 제28권4호
    • /
    • pp.409-415
    • /
    • 2015
  • 콘크리트충전강관(Concrete Filled Steel Tube, CFST) 기둥 설계 시, 강관의 국부좌굴을 방지하기 위하여 강관두께 t에 대한 기둥외경 D의 크기를 제한하고 있다. 각각의 설계시방서에서 각기 다른 최대 D/t값을 제안하고 있으며, 강재의 항복응력 $f_y$, 또는 $f_y$와 강재의 탄성계수 E의 식으로 표현된다. $f_y$와 E의 불확실성을 고려할 경우, 최대 D/t 계산식을 포함한 한계상태함수(limit state function)를 구성하여 CFST 단면의 국부좌굴에 대한 신뢰성지수(reliability index) ${beta}$를 산정할 수 있다. 결정된 ${beta}$는 사용된 최대 D/t 계산식에 따라 달라질 것이다. 이러한 신뢰성해석(reliability analysis) 결과의 가변성(variability)은 한계상태함수에 포함되는 전산모델 선택의 모호함(ambiguity)에서 기인한 것으로 모델링불확실성(modelling uncertainty)이라 한다. 모델링불확실성은 정보적불확실성(epistemic uncertainty)의 하나로 알려진 불명확성(non-specificity)으로 고려할 수 있으며, 불명확성은 가능성분포함수(possibility distribution function)를 사용하여 모델링할 수 있다. 본 연구 에서는 다른 3개의 최대 D/t 계산식을 사용하여 주어진 CFST 단면의 국부좌굴에 대한 신뢰성해석을 수행하고 각각의 신뢰성지수를 계산할 것이다. 불명확한 신뢰성지수들은 가능성분포함수를 사용하여 모델링되고, 이로부터 확신정도(degree of confirmation)를 측정할 것이다. 확신정도는 신뢰성지수가 감소하면 증가한다. 결과적으로, 확신정도에 따라 재구성된 신뢰성지수들을 얻을 수 있으며, 허용 확신정도와 함께 CFST 단면의 국부좌굴에 대한 신뢰성지수의 결정이 가능하게 된다.

보석 컷팅디자인을 활용한 보석산업활성화에 관한 연구 (A Study Of Design With Application On Of Gem Cutting Technique)

  • 장명수;박승철
    • 디지털융복합연구
    • /
    • 제10권10호
    • /
    • pp.483-490
    • /
    • 2012
  • 현대사회의 발전에 따라 삶의 질이 향상되면서, 귀금속보석은 사치품이라기보다는 패션의 일환으로 신변장식품이라는 의식변화와 함께 그 수요가 점점증가하고 있다. 인터넷(Internet) 등 멀티미디어(Multimedia)가 급속히 증가됨에 따라 파격적(破格的)인 디자인(Design)과 독특한 제품을 애용하는 인구가 늘어나고 있다. 그러나 앞으로는 한정된 천연보석의 고갈로 인하여, 천연보석만으로 그 수요를 감당할 수 없기 때문에 합성보석, 인조보석, 모조보석(模造寶石), 유기질, 물질 비경질 형태의 준(準) 광물(鑛物) 등(等)을 보석대용으로 사용한다. 그래서 합성보석의 대체성(代替性)은 필연적이기 때문에 다양한 합성보석, 유리( 琉璃)등의 소재가 개발되고 있고. 보석가공기술 및 독창적인 디자인개발이 뒤 따른다면, 합성보석에 대한 부가가치를 극대화 할 수 있다, 이에 따라 귀금속보석 산업에 있어서도 그 역할(役割)이 크게 기여(寄與) 할 것으로 본다. 세계 여러 나라는 귀금속보석 산업이 부를 추구 하는 효자산업으로 발전하고 있고, 우리나라도 2007년(年) 7월(月) 재경부가 우리나라의 귀금속보석 산업을 국가의 새로운 "신 성장 동력산업으로 육성 발전시켜 나가겠다는 귀금속보석 산업의 활성화정책"을 발표 하였다. 이에 본 연구는 귀금속산업의 활성화 방안을 찾아보기 위하여 합성보석을 이용한 보석 컷 디자인을 연구함으로써, 보석의 획일적(劃一的)인 연마형태(硏磨形態)에서 벗어나 독특하고 패션적인 커팅과 보석에 색상과 문양을 주어 다양한 보석디자인을 개발을 하고, 천연보석중심의 보석 디자인보다는 대중적이며, 많은 사람들이 함께 공유할 수 있는 합성보석을 이용하여 보석을 디자인 하였으며, 보석의 한정된 디자인 형태에서 벗어나 보석의 새로운 디자인을 발견하고 차별화된 제품을 생산함으로써 품질의 고급화로써 경쟁력(競爭力)을 확보(確保)하여 주얼리 디자인(Jewelry Design)의 창작영역 확대에 기여(寄與)하고자 보석 디자인 중심으로 연구를 하게 되었다.