• Journal of the Korean Wood Science and Technology
• /
• 제47권6호
• /
• pp.751-760
• /
• 2019

Cellulase is an eco-friendly biocatalyst, and its demand is growing in many industrial applications such as food, textile, paper, and bioenergy. Strains with a high cellulase activities are the starting point for the economic production of cellulase. In a previous study, Acanthophysium sp. KMF001 with high cellulase production ability was selected among 54 wood-rotting fungi. In this study, we evaluated the cellulase productivity of Acanthophysium sp. KMF001 quantitatively and analyzed its taxonomic location using a genetic method. Acanthophysium sp. KMF001 showed high cellulase productivity similar to that of Acanthophysium bisporum and was much better than A. bisporum in specific enzyme activity. The 28S rRNA sequence of Acanthophysium sp. KMF001 was similar to that of Acanthophysium lividocaeruleum MB1825, with 98.40% homology. Phylogenetic analysis suggested that Acanthophysium sp. KMF001 is a new strain. In this study, we propose a new strain with high cellulase productivity.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 추계학술대회 논문집
• /
• pp.259-262
• /
• 2009

The influence of pre-strain in low-cycle fatigue behavior of Fe-18Mn-0.05Al-0.6C TWIP steel was studied by conducting axial strain-controlled tests. As-received plates were deformed by rolling with reduction ratios of 10 and 30%, respectively. A triangular waveform with a constant frequency of 1 Hz was employed for low cycle fatigue test at the strain amplitudes in the range of ${\pm}0.4{\sim}{\pm}0.6$ pct. The results showed that low-cycle fatigue life was strongly dependent on the amount of pre-strain as well as the strain amplitude. Increasing the amount of prestrain, the number of reversals to failure was significantly decreased at high strain amplitudes, but the effect was negilgible at low strain amplitudes. A new model for predicting fatigue life of pre-strained body has been devised adding a correction term of ${\Delta}E_{pre-strain}$ to the energy-based fatigue damage parameter.

• 한국미생물·생명공학회지
• /
• 제27권5호
• /
• pp.359-363
• /
• 1999

To prevent appearance of resistant mosquitoes against $\delta$-endotoxin of bacillus thuringiensis subsp. israelensis (Bti) in field, a mosquitocidal Bacillus thuringiensis strain 21-2(Bt21-2) producing a new type of $\delta$-endotoxin was isolated. The strain Bt 21-2 belongs to H serotype 43, B. thuringiensis subsp. guiyangiensis (Btg). The $\delta$-endotoxins from the strain Bt 21-2 and the strain Bti were a cuboid shape morphologically, but the $\delta$-endotoxin of the strain Bt 21-2 was composed of 150, 90 and 70kDa proteins on SDS-PAGE, and the antigenicity of $\delta$-endotoxin of the strain Bt 21-2 was different from that of the strain Bti on immunoblot. The $\delta$-endotoxin gene of the strain Bt 21-2 was not amplified with specific primers of $\delta$-endotoxin gene (cry4A and cry4B) of the strain Bti on PCR.

• 한국가금학회지
• /
• 제45권3호
• /
• pp.175-182
• /
• 2018

기존의 삼계용 토종닭 품종과 GSP 육종을 통해 개발 중인 신품종 토종닭 후보라인의 도체 및 육질 특성을 비교하기 위해, 동일 조건에서 사육한 5주령의 한협3호(H), 백세미(W), 토종닭 후보라인 3계통(A, C, D)으로 구성된 250수를 도축하여 도체형질을 측정하고, 가슴육을 이용하여 육질성분과 특성을 분석하였다. 도체중은 W가 875.10 g으로 가장 높았고, 후보라인A 가 537.54 g으로 가장 낮았다(P<0.05). W는 브로일러의 특성인 가슴살의 비율이 높고, 가슴살의 지방함량도 높았다. 후보라인 3계통은 H와W 보다 linoleic acid(C18:2)의 함량이 높았다. 특히 후보라인 중 A와 D는 토종닭에서 특징적으로 많이 함유되어 있는 arachidonic acid(C20:4) 함량이 C에 비해 높았다. 전반적인 지방산 조성에서 후보라인 A와 D는 대조구 H 와 유사하였으며, 후보라인 C는 W와 유사한 경향을 보여 흥미로웠다. 백세미(W)보다는 시중 토종닭(H)과 유사한 지방산 조성을 보인 후보라인 A와 D의 관능평가 점수가 우수한 것으로 나타났다. 이 연구 결과를 바탕으로 기존의 삼계용 토종닭과 백세미를 대체하는 새로운 품질특성을 지닌 삼계용 토종닭 개발의 기초자료로 활용 가능할 것이다.

• 한국버섯학회지
• /
• 제9권1호
• /
• pp.22-26
• /
• 2011

국내 재배비중이 가장 높은 큰느타리2호의 단점을 보완하고 버섯의 국내 육성품종 다양화하고 보급을 확대시키기 위해 육성한 "곤지3호"의 주요 품종특성은 다음과 같다. 균사생장적온은 $26{\sim}29^{\circ}C$, 버섯발생 및 생육적온은 $14{\sim}18^{\circ}C$였으며, 배양일수 30일, 초발이소요일수 8일, 생육일수 5일로 전체 생육일수는 46일로 큰느타리2호와 대등하였다. 유효경수는 병당 2.4개, 대굵기 43.7mm, 대길이 123.8mm, 갓직경 64.9mm로 큰느타리2호와 비슷하였지만, 갓표면의 색도에 있어 명도값(L값)이 54.4로 큰느타리2호 58.2보다 낮아 전체 적으로 진회색을 나타내었다. 병당 수량 182g/1100cc 내외로 통계적 유의성은 없었으나 큰느타리2호 보다 높은 경향을 나 타내었다. 자실체의 단단한 정도(경도)는 $7,790g/cm^2$로 큰느타리2호 $5,650g/cm^2$보다 높았고, 탄력성, 씹음성, 탄력성 등 전체적인 물리적 지표들이 큰느타리2호보다 높았다.

• 한국지반공학회논문집
• /
• 제19권6호
• /
• pp.335-342
• /
• 2003

엄밀한 변형해석을 위해서는 전체변형률 범위에서 신뢰성 있는 변형특성 평가가 가능한 현장시험 기법이 개발되어야 한다. 공내재하시험은 현장지반의 변형률 크기에 따른 전단탄성계수를 직접 평가할 수 있는 유일한 시험기법이다. 본 연구에서는 $10^{-5}$% ∼20%의 전체변형률 범위에 대하여 적용 가능한 공동변형 측정방법을 고안하였다. 개발된 장비의 순응성 검증을 위하여 검증토조에 대한 시험과 현장시험을 수행하였다. 개발된 장비는 $5\times 10^{-2}$% 이상의 변형률 범위에서 신뢰성 있는 전단탄성계수 측정이 가능하였다. 미소한 공동변형을 측정하는데 발생하는 주요 오차의 원인은 공동변형 측정 시스템 자체보다는 측정봉과 멤브레인 사이에서 역재하-재재하 과정에 발생하는 마찰인 것으로 판단된다.

• Steel and Composite Structures
• /
• 제28권1호
• /
• pp.13-24
• /
• 2018

A size-dependent novel hyperbolic shear deformation theory of simply supported functionally graded beams is presented in the frame work of the non-local strain gradient theory, in which the stress accounts for only the nonlocal strain gradients stress field. The thickness stretching effect (${\varepsilon}_z{\neq}0$) is also considered here. Elastic coefficients and length scale parameter are assumed to vary in the thickness direction of functionally graded beams according to power-law form. The governing equations are derived using the Hamilton principle. The closed-form solutions for exact critical buckling loads of nonlocal strain gradient functionally graded beams are obtained using Navier's method. The derived results are compared with those of strain gradient theory.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.425-429
• /
• 2004

In real design of the high & interim pressure turbine casing, it is one of the important things to figure out its thermal strain exactly. In this paper, with the establishment of the new concept for the heat transfer coefficient of steam that is one of the factors in analysis of the thermal stress for turbine casing, an analysis was done for one of the high & interim pressure turbine casings in operating domestically. The sensitivity analysis of the heat transfer coefficient of steam to the thermal strain of the turbine casing was done with a 2-D simple model. The analysis was also done with switching of the material properties of the turbine casing and resulted in that the thermal strain of the turbine casing was not so sensitive to the heat transfer coefficient of steam. On the basis of this, 3-D analysis of the thermal strain for the high and interim pressure turbine casing was done.

• Structural Engineering and Mechanics
• /
• 제18권5호
• /
• pp.671-690
• /
• 2004

An assumed strain finite strip method(FSM) using the non-periodic B-spline for a shell is presented. In the present method, the shape function based on the non-periodic B-splines satisfies the Kronecker delta properties at the boundaries and allows to introduce interior supports in much the same way as in a conventional finite element formulation. In the formulation for a shell, the geometry of the shell is defined by non-periodic B3-splines without any tangential vectors at the ends and the penalty function method is used to incorporate the drilling degrees of freedom. In this study, new assumed strain fields using the non-periodic B-spline function are proposed to overcome the locking problems. The strip formulated in this way does not posses any spurious zero energy modes. The versatility and accuracy of the new approach are demonstrated through a series of numerical examples.

• 대한기계학회논문집A
• /
• 제21권12호
• /
• pp.2165-2171
• /
• 1997

The analysis model is the infinite power law creep material containing the rigid inclusion with crack shape. The present analysis is performed using the complex pseudo-stress function method. The strain rate intensity factor is developed as new fracture mechanics parameter which represents the stress and strain rate distribution near a crack tip in power law creep material. The strain rate intensity factor is developed in terms of Kolosoff stress functions.