• 제목/요약/키워드: new phosphor

검색결과 133건 처리시간 0.031초

형광체 스크린 기반 평판형 X선 검출기 적용을 위한 요오드화수은 필름 광도전체 센서 설계 및 제작 (Design and Fabrication of HgI2 Sensor for Phosphor Screen based flat panel X-ray Detector)

  • 박지군;정봉재;최일홍;노시철
    • 전자공학회논문지
    • /
    • 제51권12호
    • /
    • pp.189-194
    • /
    • 2014
  • 본 연구에서는 새로운 구조의 X선 영상 검출기로써 광민감 $HgI_2$ 층이 포함된 CsI:Na 형광층의 구조를 설계하였다. 이러한 구조에서 X선은 두꺼운 CsI:Na 층에서 가시광선으로 변환된 후 하부의 얇은 $HgI_2$ 층에서 전하로 변환된다. CsI:Na와 $HgI_2$로 구성된 복합구조의 두께를 최적화하기 각 층의 두께를 변화시켜 X선에 대한 흡수효율을 시뮬레이션 하였다. 현재 상용화된 a-Se 단일층의 검출기는 수십 kV의 고전압이 요구되고, CsI:Na/a-Si 구조의 간접변환 방식은 낮은 변환효율을 가지는 단점이 있다. 본 연구의 결과로 제시된 새로운 형태의 CsI:Na/$HgI_2$ 복층 구조의 x-ray 검출기는 고전압이 필요한 직접 변환방식의 단점과 간접 변환방식의 낮은 효율을 보완할 수 있을 것으로 생각된다.

해양 심층수를 이용한 미네랄소금 제염장치 개발 (Development of for Mineral Salt Manufacturing System using Deep Sea Water)

  • 김현주;신필권;문덕수;정동호
    • 한국해양공학회:학술대회논문집
    • /
    • 한국해양공학회 2004년도 학술대회지
    • /
    • pp.183-189
    • /
    • 2004
  • Deep ocean water is located in the sea deeper than 200m. At such depth the solar light does not reach, photosynthesis is not performed and nutrition salt is not consumed. Therefore, campared with surface water, Deep Sea Water contains more nutrition salt, such as nitrogen and phosphor. Moreover, it has the good balance of minerals. This Research is primary attempt for apply deep sea water to food industry. New type of mineral salt manufacturing system was developed and high levels of Ca, K, Mg detected from the salt analysis.

  • PDF

The Preparation of $Ce^{3+}$doped Y-SiAlON for LED Phosphor.

  • Ahn, Joong-In;Han, Cheong-Hwa;Kim, Chang-Hae
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
    • /
    • pp.644-646
    • /
    • 2004
  • We have investigated luminescence properties of Ln-SiAlON materials doped with $Ce^{3+}$. Low-energy 4f${\leftrightarrow}$5d transitions were observed as compared to the luminescence of this ion doped in oxidic host-lattices.$^1$ Ce-doped Y-a-SiAlON show bright long wavelength luminescence with high absorption for 305 and 455nm excitation. In our experiment, the sintering temperature of this material(1400$^{\circ}C$) was lower than that of normal sintering temperature (1700$^{\circ}C$). However, Single phase of SiAlON was not composed we observed the YAG phase.

  • PDF

A flat thin display with RF electron generation

  • Dijk, R. Van;Vissenberg, M.C.J.M.;Zwart, S.T. De
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
    • /
    • pp.927-930
    • /
    • 2004
  • We report on a new type of a flat and thin display with a secondary emission electron source. In this display device electrons are multiplied between two secondary emission plates under a high frequency electric field. This principle has a few important advantages over a field emission display: the emission comes from flat plates, which reduces the life-time problems of ion bombardment of field emitter tips. Furthermore, the electron emission is space charge limited which gives a uniform electron distribution. The electrons are extracted from the source and accelerated to a phosphor screen to generate light. Gray levels are made by pulse width modulation.

  • PDF

백색 전계 발광소자의 구현과 전기 .광학적 특성 (White Electroluminescent Device Implementation and Its Electrical and Optical Properties)

  • 양종경;김종욱;김진만;노승수;박홍용;이종찬;박대희
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2001년도 하계학술대회 논문집
    • /
    • pp.343-346
    • /
    • 2001
  • To implementation of white electroluminescnet device in this paper, two methods were tried without synthesis of new white EL phosphor. At first, ZnS:Mn,Cl was mixed with ZnS:Cu from 20 to 50 weight percents. Second, ZnS:Mn,Cl was mixed with blue dye from 0 to 1.2 weight percents. The devices for experiments were measured as following; current-voltage, emission spectrum, brightness-voltage and CIE coordinate system and frequency properties.

  • PDF

CVD법으로 제조한 탄소 나노튜브의 전계 전자 방출 특성 (Properties of Field Emission Electrons for CVD-grown Carbon Nanotubes)

  • 이임렬
    • 한국재료학회지
    • /
    • 제13권7호
    • /
    • pp.424-428
    • /
    • 2003
  • The microstructure and field emission properties of carbon nanotubes(CNT) grown by Ni-catalytic chemical vapor deposition(CVD) were investigated. CVD-grown CNT had a high density of curved shape with randomly oriented. It was found that an increase in electric field caused an increase in field emission current and field emission sites of CNT. The maximum field emission current density was measured to be 3.6 ㎃/$\textrm{cm}^2$ at 2.5 V/$\mu\textrm{m}$, while the brightness of 56 cd/$\textrm{cm}^2$ was observed for the CNT-grown area of 0.8 $\textrm{cm}^2$ from a phosphor screen. Field emission current at constant electric field gradually decreased initially and then stabilized with time.

Fast response time PDP phosphors for 3D display application

  • Song, Jay-Hyok;Song, Yu-Mi;Kim, Ji-Hyun;Kim, Min-Ju;Kim, Ji-Hyun;Kwon, Seon-Young;Park, Do-Hyung;Kim, Yoon-Chang;Zang, Dong-Sik
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2008년도 International Meeting on Information Display
    • /
    • pp.1255-1258
    • /
    • 2008
  • New phosphors that enable the 3D application of PDP have been developed The decay times of $Y_3Al_5O_{12}:Ce^{3+}$, $(Y,Gd)Al_3(BO_3)_4:Tb^{3+}$ and $(Y,Gd)_2O_3:Eu^{3+}$ were extremely shorter than those of conventional PDP phosphors. The color coordinates and intensities of the phosphors were also suitable for PDP For the first time in PDP industry, 3D/2D switchable PDP has been commercially available by adopting the phosphors.

  • PDF

A High Efficiency and Low Power Dynamical Driving Scheme for Carbon Nanotube Backlight Units

  • Liang, Chao-Chiun;Huang, Chiao-Nan;Lin, Biing-Nan;Fu, Chuan-Hsu;Tsou, Te-Hao;Lin, Wei-Yi;Lin, Ming-Hung;Kuo, Yan-Shiun
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
    • /
    • pp.1202-1205
    • /
    • 2006
  • Dynamic Driving Carbon Nanotube Backlight Units (CNT-BLUs) can well utilize the persistence of their phosphor. This paper studies several dynamic driving schemes for the CNT-BLU developed by DTC/ITRI. Their illuminating efficiencies are experimentally evaluated. From these evaluations, this paper develops a new driving approach and even better efficiencies are obtained.

  • PDF

Properties of Xe plasma flat fluorescent lamp by screen printing

  • Lee, Yang-Kyu;Kang, Jong-Hyun;Yoon, Seung-Il;Kim, Tae-Kwon;Bae, Sung-Jo;Oh, Myung-Hoon;Lee, Dong-Gu
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
    • /
    • pp.1386-1389
    • /
    • 2006
  • In this study, a plasma flat fluorescent lamp having a new structure was fabricated by screen printing technique. Coplanar types of silver electrodes with a dielectric layer were screen-printed on a rear glass plate, and then fired at $550^{\circ}C$ and $580^{\circ}C$, respectively. Phosphor was spin-coated on the dielectric layer with firing at $490^{\circ}C$. Several types of lamps were designed and its properties wee investigated with electrode shape, gas pressure, etc.

  • PDF

Synthesis of ZnS:Cu,Cl phosphor by combustion method

  • Han, Sang-Do;Kim, Byeong-Kwon;Park, Jo-Yong;Khatkar, S.P.;Taxak, V.B.;Singh, Ishwar
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2002년도 International Meeting on Information Display
    • /
    • pp.759-761
    • /
    • 2002
  • A new method for the preparation of copper activated zinc sulfide phosphors by combustion method has been proposed. Copper nitrate was decomposed with an organic fuel to give fine sized particles in presence of alkali metal halides at low temperature than the conventional synthesis. Organic compound also acted as fuel at 500 $^{\circ}C$ with rapid heating. The phosphors thus obtained were then heated at 900 $^{\circ}C$ in an inert atmosphere for 2-5 hrs to get better luminescent properties.

  • PDF