• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.9
• /
• pp.1874-1881
• /
• 2002

Heat dissipation technology using the flow resonant phenomenon is a kind of a new concept in the heat transfer area. A vibration exciter is needed to enhance air flow mixing which has the natural shedding frequency of thermal system. A mechanical vibrating device for the air flow oscillation is introduced, which is driven by a moving coil actuator with a displacement estimator using strain gage. An analytical dynamic model for this mechanical vibration exciter is presented and its validity is checked by the comparison with experimental data. Values of some unknown system parameters in the analytic model are estimated through the system identification approach. Based on this mathematical model, the vibration exciter using strain displacement estimator is developed. During the experimental verification phase, it turns out the high modal resonant characteristics of a vibrating plate are a major barrier against obtaining a high bandwidth vibration exciter.

• Journal of Mechanical Science and Technology
• /
• v.19 no.2
• /
• pp.520-528
• /
• 2005

In this study, a new mathematical dynamic model of displacement sensitive shock absorber (DSSA) is proposed to predict the dynamic characteristics of automotive shock absorber. The performance of shock absorber is directly related to the vehicle behaviors and performance, both for handling and ride comfort. The proposed model of the DSSA has two modes of damping force (i.e. soft and hard) according to the position of piston. In this paper, the performance of the DSSA is analyzed by considering the transient zone for more exact dynamic characteristics. For the mathematical modeling of DSSA, flow continuity equations at the compression and rebound chamber are formulated. And the flow equations at the compression and rebound stroke are formulated, respectively. Also, the flow analysis at the reservoir chamber is carried out. Accordingly, the damping force of the shock absorber is determined by the forces acting on the both side of piston. The analytic result of damping force characteristics are compared with the experimental results to prove the effectiveness. Especially, the effects of displacement sensitive orifice area and the effects of displacement sensitive orifice length on the damping force are observed, respectively. The results reported herein will provide a better understanding of the shock absorber.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.05a
• /
• pp.181-183
• /
• 2002

The accurate permeability for preform is critical to model and design the impregnation of fluid resin in the composite manufacturing process. In this study, the in-plane and transverse permeability for a woven fabric are predicted numerically through the coupled flow model which combines microscopic with macroscopic flow. The microscopic and macroscopic flow which are flows within the micro-unit and macro-unit cell, respectively, are calculated by using 3-D CVFEM(control volume finite element method). To avoid checker-board pressure field and improve the efficiency on numerical computation, A new interpolation function for velocity is proposed on the basis of analytic solutions. The permeability of plain woven fabric is measured through unidirectional flow experiment and compared with the permeability calculated numerically. Based on the good agreement of the results, the relationships between the permeability and the structures of preform such as the fiber volume fraction and stacking effect can be understood. The reverse and the simple stacking are taken in account. Unlike past literatures, this study is based on more realistic unit cell and the improved prediction of permeability can be achieved. It is observed that in-plane flow is more dominant than transverse flow in the real flow through preform and the stacking effect of multi-layered preform is negligible. Consequently, the proposed coupled flow model can be applied to modeling of real composite materials processing.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.46 no.6
• /
• pp.1128-1141
• /
• 2022

Due to increased interest in safety in sports, leisure, industries, and daily life; the demand for products that protect the head is increasing. As a preparatory study for the development of head protection for head injury prevention, this study analyzed patents and utility models related to head protection products such as industrial safety helmets, vehicle helmets, and sports protection gear. For this study, 368 patents and utility models for head protection products searched through WipsOn were selected and analyzed by application year, function, application, protection area, main material, and subject. From the analytic results of this study, the quantitative and qualitative flow and characteristics of developing technology related to head protection products were identified. Through the trend of current technology, it provided data to seek the development direction in the future. The significance of this study is to secure objective data to establish a road map for creating new Intellectual Property for head protection products.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.24 no.5
• /
• pp.409-414
• /
• 2012

A theoretical investigation to optimize thermoelectric elements for thermoelectric coolers was performed using a new one-dimensional analytic model. Mathematical expressions for the optimum current and the optimum length of a thermoelectric element, which maximize the coefficient of performance of thermoelectric coolers, were obtained. The optimum current is expressed in terms of the cooling load for a thermoelectric element, the hot and cold side temperatures and thermoelectric properties, but not the length of a thermoelectric element. The optimum current is proportional to the cooling load and decreases as the temperature difference between the hot and cold sides decreases. It is also shown that the optimum length of a thermoelectric element decreases as the cooling load increases.

• Proceedings of the ESK Conference
• /
• 1998.04a
• /
• pp.93-98
• /
• 1998

Recently, consumers are tend to purchase the user-centered designed product using interface enginnering and human factors techniques. Therefore, it is important that the designer's requirements should be analyzed focused on the human machine interface. This paper described the interface usability evaluation technique(suvjective evaluation) for the interface between user and product. This methodology is the integrated interface usbility evaluation method AHP and Conjoint Analysis. AHP(Analytic Hierarchy Process) is a multicriteria decision model to give priority after expressing hierarchically for decision making problem. Conjoint Analysis enduavors to unravel the value, or partworths, that consumers place on the product or service's attributes from experimental subjects' evluation of profiles based on hypothetical products or services. A new usability test methodology proposed by this paper includes techniques jointed both consistency test by AHP and experimental subjective evaluation of profiles by Conjoint Analysis for evaluating the user's emotion and impression.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.25 no.5
• /
• pp.46-52
• /
• 2002

Today's database system needs to collect huge amount of questionnaire that results from development of the information technology by the internet, so it has to be administrable. However, there are many difficulties concerned with finding analytic data or useful information in the high capacity-database. Data mining can solve these problems and utilize the database. Questionnaire analysis that uses data mining has drawn relevant patterns that did not look or was tended to overlook before. These patterns can be applied by a new business rule. The purpose of this research is to analyze the questionnaire results and to present the result that can help to make decision easily with data mining. Recognition and analysis about these techniques of data mining show suitable type of questionnaire survey. This research focus on the form of present composition and the model of suitable questionnaire to analyze the type of it. Also, the comparison between the actual questionnaire result and the conventional statistical analysis is examined.

• Journal of the Korean Statistical Society
• /
• v.35 no.4
• /
• pp.419-439
• /
• 2006

The article develops a new class of distributions by introducing a nonnegative perturbing function to $t_\nu$ distribution having location and scale parameters. The class is obtained by using transformations and conditioning. The class strictly includes $t_\nu$ and $skew-t_\nu$ distributions. It provides yet other models useful for selection modeling and robustness analysis. Analytic forms of the densities are obtained and distributional properties are studied. These developments are followed by an easy method for estimating the distribution by using Markov chain Monte Carlo. It is shown that the method is straightforward to specify distribution ally and to implement computationally, with output readily adopted for constructing required criterion. The method is illustrated by using a simulation study.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.14 no.4
• /
• pp.201-210
• /
• 2010

We propose a new robust and accurate method for the numerical solution of medical image segmentation. The modified Allen-Cahn equation is used to model the boundaries of the image regions. Its numerical algorithm is based on operator splitting techniques. In the first step of the splitting scheme, we implicitly solve the heat equation with the variable diffusive coefficient and a source term. Then, in the second step, using a closed-form solution for the nonlinear equation, we get an analytic solution. We overcome the time step constraint associated with most numerical implementations of geometric active contours. We demonstrate performance of the proposed image segmentation algorithm on several artificial as well as real image examples.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.31 no.4
• /
• pp.105-123
• /
• 2006

Previous research on two-sided markets has, for the most part, concentrated on indirect network externalities between buyers alto sellers. This paper considers direct competition effect among sellers and among buyers as well as indirect network externalities. We develop an analytic model of C2C e-marketplaces and examine whether a monopolistic incumbent could successfully deter new entry into its market. We find that the effect of the number of sellers or buyers on the price of goods depends on whether sellers have decided to sell the goods using an auction or fixed pricing rule and on the characteristics of the goods. We argue that when the effect of the number of sellers on the price of goods is significantly larger than that of buyers, there is a high possibility of entry. In particular, we show that entry becomes more difficult to deter as fixed-price format is adopted more frequently or the proportion of collectables is relatively low.