• Journal of the Korean Magnetics Society
• /
• v.10 no.1
• /
• pp.22-29
• /
• 2000

The effective linewidth was measured using the conventional cavity perturbation method at 9.43 GHz in room temperature for Ca-Zr substituted yttrium iron garnet plate. The experimental set-up consists of the network analyzer, the electromagnet and the cylimdrical TE001 cavity. Measurement was performed in the static magnetic field perpendicular to the sample plane. The real and imaginary parts of diagonal component of the microwave susceptibility tensor are obtained from the resonance frequency and the quality factor Q of the cavity. Variations of the effective linewidth was qualitatively explained with the spin wave scattering theory.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2005.04a
• /
• pp.36-41
• /
• 2005

복소유전율상수인 실수부(Real part)와 허수부(Imaginary part)를 측정하기 위하여 Frequency Domain Reflectometry with Vector Network Analyzer(FDR-V) 측정 장비로 $1{\sim}18GHz$ 범위 내에서 매질의 기본 구성단위인 공기, 물, 흙입자에 대한 기본적인 유전율 특성을 파악하고, 이들로부터 다공질 매질내 유류 오염물질의 함유 특성을 측정할 수 있다. 또한 제작된 시료에 대한 포화도와 1GHz 범위에 분포하는 실수부 유전율상수와의 관계로부터 매질의 공극내 함유된 물질의 유전율상수 특성에 매우 민감한 반응을 보이므로, 이들로부터 매질의 공극률 내지 유효공극률의 측정이 가능할 것으로 사료된다.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.9
• /
• pp.450-455
• /
• 2001

We proposed a new sensitivity verification method for the UHF partial discharge(PD) detection system. Initially, we measure the UHF power induced by 5 pC PD which takes place near UHF sensor. Subsequently, we inject the swept UHF signal from a network analyzer into the GIS and measure the attenuation of the signal along the 71S Both the UHF power by 5 pC PD and the attenuation make it possible to verify the sensitivity and spatial coverage of the PD detection system. This method doesn\`t require the calibration of injected pulse type UHF signal into the GIS and makes us precisely measure the attenuation in frequency domain.

• Proceedings of the KIEE Conference
• /
• 2006.10a
• /
• pp.137-138
• /
• 2006

In this paper, we study the algorithm for the multiport measurements using the 2port VNA(Vector network Analyzer). We explain the conversion algorithm which the open impedance to the matched impedance(50 ohm), and then we apply this algorithm to the 4 port VNA measurement. Finally, we discuss the reliability of this algorithm.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.1
• /
• pp.136-142
• /
• 2001

In this paper, a method of canceling and suppressing differential mode crosstalk noise signals caused by non-uniform coupling between two transmission lines in UTP (unshielded twisted pair) modular jacks is discussed. Differential mode crosstalk noise signals in balanced transmission lines with UTP modular jacks were suppressed, by applying field cancellation techniques to this modular jack. To verify an effectiveness of the field cancellation techniques, 8 pin modular jacks were made, and the NEXT (Near End Crosstalk) losses were measured to prove its applicability by the network analyzer(HP8720C) at 100 Mb/s.

• International Journal of Internet, Broadcasting and Communication
• /
• v.8 no.4
• /
• pp.26-38
• /
• 2016

Recently, mobile traffic has increased tremendously due to the deployment of smart devices such as smartphones and smart tablets. Android is the world's most powerful mobile platform in smartphone. The Android operating system provide seamless access to many applications and access to the Internet. It would involve network packet sharing communicated over the network. Network packet contains a lot of useful information about network activity that can be used as a description of the general network behaviours. To study what is the behaviours of the network packet, an effective tools such as network packet analyzers software used by network administrators to capture and analyze the network information. In this research, more understanding about network information in live network packet captured from Android smartphone is the target and identify the best network analyzer software.

• Journal of Broadcast Engineering
• /
• v.13 no.3
• /
• pp.350-364
• /
• 2008

Single frequency network (SFN) design based on the Advanced Television Systems Committee (ATSC) specification, a terrestrial digital television (DTV) system, normally causes a interference problem, among signals from multiple transmitters or repeaters. To solve this, the ATSC recommended practice (RP) introduces a transmitter identification (TxID) signal embedded in a signal from each transmitter or repeater. A TxID signal analyzer is then used to detect the TxID signal, and following the analysis results, a SFN design can be adjusted. This paper discusses the generation and usages of Kasami sequence, is used the TxID signal. The configuration of the TxID signal analyzer to efficiently detect TxID signal is proposed and the results of theoretical performance analysis are provided. Moreover, computer simulation and laboratory test results are provided to evaluate the performance of TxID signal analyzer and the theoretical performance analysis.

• Nuclear Engineering and Technology
• /
• v.56 no.7
• /
• pp.2557-2562
• /
• 2024

A type of integrated multiple-single-channel analyzer (IMSCA) is described. The IMSCA works with an input pulse of 2-20 pC, and it can be directly connected to a scintillation detector, which eliminates the need for a linear amplifier. It consists of 64 input ports, so 1-64 detectors can be set by users according to different requirements. Two energy regions for each input channel can be simultaneously analyzed. Another advantage of the IMSCA is that it integrates with a high-speed pulse signal acquisition card and transmits data to the computer through the network. The maximum pulse through-rate is 1.4 MHz, and linearity can reach 0.1%. This IMSCA has been successfully used in enrichment detecting of nuclear fuel rod.

• Journal of Aerospace System Engineering
• /
• v.16 no.1
• /
• pp.1-11
• /
• 2022

Avionics Full-DupleX Ethernet (AFDX) is a next-generation avionics network interface technology that is widely applied in the latest aircraft to replace ARINC429 and MIL-STD-1553B. However, the criteria for authenticating an avionics network consisting of AFDX are very scarce. Using AFDX Protocol Analyzer developed by the Korea Electronics Technology Research Institute and AFDX Tap developed by the Korea Aerospace University, we proposed a technology of certification practicality that can verify the normal functioning of avionics equipment with AFDX network interface. Our proposed technology provided the ability to collect precision packets, to verify AFDX specification compliance, and perform automatic tests to reduce the time and cost of authentication of AFDX avionics devices.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.2
• /
• pp.119-126
• /
• 2015

The information about noise parameters is essential in the design of low noise amplifier. In the past, the noise parameters were measured using an impedance tuner and noise figure analyzer. Recently, the authors proposed the method of measuring the noise parameters using the 8-port network without the aid of the mechanically driven impedance tuner. However, the 8-port method still requires the noise source and causes the complexity in the measurements. In this paper, a novel measurement method of the noise parameters without the noise source using 6-port network is proposed. Based on the proposed 6-port method, the noise parameters of 10 dB attenuator whose noise parameters can be theoretically determined were measured and the measured noise parameters are compared with those measured using the previous 8-port network method. As a result, the accuracy of the measured noise parameters using 6-port network is found to be comparable to the previous 8-port network method.