• ETRI Journal
• /
• v.41 no.2
• /
• pp.207-223
• /
• 2019

Network function virtualization can significantly improve the flexibility and effectiveness of network appliances via a mapping process called service function chaining. However, the failure of any single virtualized network function causes the breakdown of the entire chain, which results in resource wastage, delays, and significant data loss. Redundancy can be used to protect network appliances; however, when failures occur, it may significantly degrade network efficiency. In addition, it is difficult to efficiently map the primary and backups to optimize the management cost and service reliability without violating the capacity, delay, and reliability constraints, which is referred to as the reliability-aware service chaining mapping problem. In this paper, a mixed integer linear programming formulation is provided to address this problem along with a novel online algorithm that adopts the joint protection redundancy model and novel backup selection scheme. The results show that the proposed algorithm can significantly improve the request acceptance ratio and reduce the consumption of physical resources compared to existing backup algorithms.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.11 no.1
• /
• pp.69-78
• /
• 2015

Internet of Things(IoT) is electronic devices and household appliances use wireless sensor network in environment of high speed wireless network and LTE mobile service. The combination of the development of Internet and wireless network led to development of new forms of service such as electronic devices and household appliances can connect to the Internet through various sensors and online servers such as a Home Network. Even though Internet of Things is useful, there are problems in Internet of Things. In environment of Internet of Things, information leakage could happens by illegal eavesdropping and spoofing. Also illegal devices of wireless communication interference can cause interfere in Internet of things service, physical damage and denial of service by modulation of data and sensor. In this thesis, it will analyze security threats and security vulnerability in environment of mobile services and smart household appliances, then it will suggest plan. To solve security issues, it is important that IT and RFID sensor related companies realize importance of security environment rather than focus on making profit. It is important to develop the standardized security model that applies to the Internet of Things by security-related packages, standard certification system and strong encrypted authentication.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.724-727
• /
• 2004

With the development of modem communication and networking technology, more and more computing and communication facilities, automation equipments, hone information appliances and different type of networking terminals come into home all over the world. The user can control information appliances in home environments. The home environment can communicate with the external network via phone line, wired LAN, wireless LAN, or mixed. However, home information appliances that are connected to the external network are under attack and need to be secured. So specifying suitable security requirements and policies for digital home environment is critical in hone networking environments. This paper analyzes the possible vulnerability to home network, and specifies the security requirements derived from the vulnerability analysis for digital home environment

• Journal of Digital Convergence
• /
• v.13 no.9
• /
• pp.177-182
• /
• 2015

The brand and product awareness of Korean electronics companies in the North American market has grown significantly and North American consumers has been recognized as an innovative technology products good performance of Korean electronics appliances. The consumer need of energy saving has led to a rise in market share because Korean electronics appliances have the excellence in energy saving aspects. The expansion of smartphones and mobile devices and the development of smart grid technology can affect electronics market. Domestic companies are continuously develop new product to provide consumers convenient with a variety of additional features combined consumer products. This study proposes a convergence model for sales prediction of electronic appliances using sales data of A company from the North American market. We develop the convergence model for sales prediction based on based on artificial neural network and genetic algorithm. In addition, we validate the superiority of the proposed convergence model by comparing the prediction performance of traditional prediction models.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2559-2561
• /
• 2002

This paper presents a systematic method of probing channel characteristics and communication reliabilities of home PLC (power line communication) network applied to the Internet accessed control of home appliances. The effects of the three performance deterioating factors, i.e., additive noise, channel attenuation, and intersymbol interference, can be systematically measured by applying the channel probing waveform in the frequency range from 100kHz to 450kHz. The agreement between the derived probability of bit error and the measured probability of bit error supports the validity of the proposed approach of probing home power line channel characteristics. The experimental results performed with the constructed test-bed applying the proposed channel probing method also support the feasibility of commercially deploying the PLC modem installed home appliances and their services for the Internet accessed home automation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.695-698
• /
• 2007

The control of electrical appliances residing in the home network can be accomplished via Internet with the UPnP expansion without modifying an existing UPnP. In this paper, we propose the Internet Gateway that consists of an UPnP IGD(Internet Gateway Device) DCP(Device Control Protocol) and an UPnP Bridge as a system to control electrical appliances of home network. UPnP IGD DCP is to enable the configurable initiation and sharing of Internet connections as well as assuring advanced connection-management features and management of host configuration service. It also supports transparent Internet access by non-UPnP-certified devices. UPnP Bridge searches for local home network devices by sending control messages, while control point of UPnP Bridge looks up devices of interest on the Internet, subsequently furnishing the inter-networking controlling among devices which belong to different home network systems. With our approach, devices on one home network can control home electrical appliances on the other hone network via Internet through IGD DCP with control commands of UPnP.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.5
• /
• pp.147-154
• /
• 2009

Lately, superhigh speed network infra is developing with the fast speed, is evolved by step that existent appliances are digitalised and appliances are become remote control by being gear to network. Also, gearing in Home network and superhigh speed network infra, control appliances in Internet and research that do monitering is proceed. Therefore, describe about indoor environment automatic control system that use Wireless sensor and Microcontroler in this paper. Because using that electric power, Zigbee sensor and Wireless module, embodied system that measured in the room temperature and use ATmega128 Microcontroler and use each device (temperature, illumination, humidity) back in house and control humidifier, electric fan etc. Can use variously in Home network field by this Wireless sensor and Microcontroler base, and also can apply variously to several industry fields as well as Home network field.

• The Journal of the Korea Contents Association
• /
• v.5 no.5
• /
• pp.26-32
• /
• 2005

Standardization of the home-networking technologies and the home network trial has been tried to activate the home network services and develop the new business models. Home network mobile service using a cellular phone provides the control and monitoring the states of the information appliances and HA(home automation) devices through a home network gateway interworking with a home server. For this purpose, the home network mobile application in a cellular phone can automatically change the configuration of the information appliances and HA devices interworking with a home server. In this paper, we propose the home appliance auto-configuration scheme using XML for home network mobile services. The proposed scheme is implemented on WIPI of the domestic mobile platform standardization.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.7
• /
• pp.759-766
• /
• 2011

Recently, noise reduction in room air conditioners has been one of the important issues as well as cooling efficiency. The rotary compressor is the dominant noise source in an air conditioner. A number of studies have been conducted on reducing compressor noise through improving muffler and resonator design. However the noise from the accumulator, a noise delivering path between compressor and air conditioner, is not fully taken into consideration. The accumulator contains a large inner cavity, and usually generates additional resonance noise during operation. This paper aims to conduct an optimal design for reducing accumulator noise by maximizing the transmission loss within the target frequency range that represents high-order nonlinearity. Design of experiments and radial basis function neural network are used in the context of approximate meta-models, and genetic algorithm is used as an optimization tool.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.1 s.39
• /
• pp.167-176
• /
• 2006

In this paper, a home network access agent, which controls and monitors networked appliances at home using various terminals regardless of user's location, is designed and implemented. The proposed access agent integrates wire and wireless network on a home gateway (or home server) and is accessed with consistent messages using various terminals such as a web terminal, a PDA and a cellular phone. Also, in order to verify the operation and availability of the agent, a user interface for the various terminals is designed and a home network testbed which is accessed and controlled by the terminals is implemented.