• Journal of Acupuncture Research
• /
• 제37권1호
• /
• pp.28-34
• /
• 2020

This is a systematic review of the clinical use of cupping therapy. Four domestic databases and 2 foreign databases were searched. Studies that reported the cupping pressure used during cupping therapy were included in this study. The types of cupping, cupping site, pressure, and duration of cupping were the main parameters analyzed. A total of 27 studies, including 24 experimental studies were analyzed. There were 12 constant negative pressure (domestic) studies with a range between 60 mmHg and 600 mmHg. There were 5 maximum negative pressure (domestic) studies and the maximum negative pressure was 620 mmHg. Three studies used a maximum negative pressure of 600 mmHg. There were 4 constant negative pressure (foreign) studies with a range between 75 mmHg to 750 mmHg. There were 3 maximum negative pressure (foreign) studies with a maximum pressure of 420 mmHg. The studies differed with regards to the materials used and the amount of pressure applied. Many studies had limited information and therefore generalizability of the results in this review is limited. Further experimental studies are required to establish the correlation between cupping pressure and treatment effects so that cupping therapy can be standardised.

• 전자공학회논문지SC
• /
• 제37권3호
• /
• pp.44-54
• /
• 2000

본 논문에서는 표준 메모리 공정에 구현 가능한 주파수 적응성을 갖는 부지연 회로의 설계기법에 대해 제안한다. 제안하는 설계기법은 기본적으로 아날로그 SMD (synchronous mirror delay) 형태의 부지연 회로로서 입력클록의 주기와 구현하고자 하는 부의 지연 시간의 차이에 해당하는 시간을 아날로그 회로의 개념으로 측정하고 다음 번 주기에서 반복한다. 출력클록의 발생과 관련되는 부수적인 지연을 측정단의 앞 단인 지연모델 단에서 상쇄하는 기존의 SMB 기법과는 달리, 반복단에서 상쇄하는 새로운 기법을 통하여 넓은 부지연 범위를 구현하여 특히 고속동작에서의 부지연 특성을 원할하게 한다. 또한 넓은 범위의 주파수 동작범위를 구현하기 위해 해당하는 주파수 범위에서 아날로그 회로가 최적의 동작 조건을 갖추도록 하기 위한 새로운 주파수 감지기 및 최적조건 설정기법을 제안한다. 제안된 회로의 응용으로서 초고속 DRAM인 DDR SDRAM에 적용하는 예를 보였으며, 0.6㎛ n-well double-poly double-metal CMOS 공정을 사용하여 모의실험 함으로써 그 유용성을 입증한다.

• 융합정보논문지
• /
• 제8권6호
• /
• pp.107-116
• /
• 2018

본 연구는 아동간호학 실습 전 정서상태를 확인하여 아동간호학 실습 교육 중재프로그램의 기초자료를 얻기 위해 PANAS를 이용하여 간호학과 3학년 학생 143명을 대상으로 시행된 서술적 조사연구이다. 수집된 자료를 SPSS 19.0으로 분석한 결과, 정적정서는 남학생이, 부적정서는 여학생 유의하게 높았으며, 정적 부적정서 미치는 영향요인 규명을 위한 다중회귀분석에서 전공만족도, 성격유형, 간호학 선택동기 및 실습예정 병원유형이 정적정서에의 영향요인이었던 반면 성별이 부적정서에 영향을 미치는 것으로 나타났고, 이들 변수들의 정적, 부적정서에의 설명력은 각각 22.8%, 7.8%이었다. 간호대학생의 아동간호학 실습 전 느끼는 부적정서의 원인을 규명하는 질적연구를 통해 아동간호학 실습 전 정서중재 프로그램의 시행이 필요하다. 또한 실습 전후의 정서상태를 비교하는 실험연구 및 기타 간호학 학과목 실습과 관련된 간호대학생의 정서상태의 비교 연구 시행을 제언한다.

• Journal of Information Technology Applications and Management
• /
• 제27권6호
• /
• pp.53-73
• /
• 2020

Many prior studies have been conducted that positive reviews increase the intention to purchase. However, there are very few papers that have studied the impact of review search on purchase satisfaction. It is meaningful to study the impact of review search on purchase satisfaction as it can lead the business successfully by inducing repurchase. There is also no study of how review search have different effects on purchase satisfaction among countries. Given the growing number of cross-border e-commerce, we believe that the need for research is high because identifying these differences between countries can have a very important impact on a company's successful overseas expansion. Therefore, in this study, the impact of positive and negative review search on purchase satisfaction and the national impact were set up as a research model. In order to verify this research model, the survey was distributed to those who experienced online purchase in Korea and China, and a total of 234 copies were collected, including 125 copies in Korea, 109 copies in China, and the research model was verified using Smart-PLS structural equation analysis tools. First, positive review search has been shown to positively affect purchase satisfaction. Second, it has been shown that negative review search also has a positive effect on purchase satisfaction. Third, the impact of positive and negative review search on purchase satisfaction was different between Korea and China. While Korea is more aggressive in review search than China due to its high tendency to avoid uncertainty, China is less likely to avoid uncertainty than Korea and is more likely to rely on brand familiarity. Therefore, according to the uncertainty avoidance moderation effect the impact of positive and negative review search on purchase satisfaction was higher in Korea than in China. In this study, Shopping mall managers need to take strategic measures to maximize shopping mall performance by recognizing positive aspects of negative review search on purchase satisfaction. Companies and managers in Korea and China can establish strategies to promote product sales when companies enter the global market.

• 한국임상약학회지
• /
• 제22권1호
• /
• pp.65-72
• /
• 2012

Antidepressants are frequently prescribed for a wide range of symptoms. Surveys in several countries have suggested that negative attitudes towards antidepressants are common. However, there has been limited research associated with the attitudes in Korea. Therefore, this quantitative descriptive study describing the perception and attitudes toward antidepressants was performed using healthy people and outpatients who are not taking antidepressants. The surveys by means of self-reporting questionnaires showed negative attitudes towards antidepressants (74.2%). But, 74.2% of above participants gave positive answers to take antidepressants when they are counseled by medical professionals. Higher rates of negative attitudes were found in younger age group ("it causes addiction") and healthy volunteers and urban area groups ("it causes physical harm"). Study participants without experiences in taking antidepressants showed more negative attitudes although the difference was not statistically significant. Based on the results, accurate and objective information about antidepressants needs to be provided by well-trained health professionals.

• 한국멀티미디어학회논문지
• /
• 제16권12호
• /
• pp.1465-1474
• /
• 2013

In this paper, air pollutant tracing models using perceptron neural network(PNN) and non-negative least square(NNLS) are proposed. When the measured values of the air pollution and the contribution concentration of each source by chemical transport modeling are given, they estimate and trace the amount of the air pollutants emission from each source. Two kinds of emissions data are used in the experiments : CH4 and N2O of Geumgo-dong landfill greenhouse gas, and PM10 of 17 areas in Northeast Asia and eight regions of the Korean Peninsula. Emission values were calculated using pseudo inverse method, PNN and NNLS. Pseudo inverse method could be used for the model, but it may have negative emission values. In order to deal with the problem, we used the PNN and NNLS methods. As a result, the estimation using the NNLS is closer to the measured values than that using PNN. The proposed tracing models have better utilization and generalization than those of conventional pseudo inverse model. It could be used more efficiently for air quality management and air pollution reduction.

• 전자공학회논문지SC
• /
• 제40권4호
• /
• pp.275-281
• /
• 2003

0.5㎛ 2중 폴리 CMOS 공정을 이용하여 새로운 뉴럴 오실레이터를 설계, 제작하였다. 제안하는 뉴럴 오실레이터는 트랜스콘덕터 및 캐패시터와 비선형 가변 부성저항으로 이루어진다. 뉴럴 오실레이터의 입력단으로 사용되는 비선형 가변 부성저항은 정귀환의 트랜스콘덕터와 가우시안 분포의 전류전압 특성을 지니는 범프 회로를 이용하여 구현하였다. 또한 SPICE 모의실험을 통하여 제안한 오실레이터의 특성분석 후 집적회로 설계를 실시하였다. 한편 흥분성 및 억제성 시냅스로 연결된 4개의 뉴럴 오실레이터로 간단한 신경회로망을 구성하여 그 특성을 확인하였다. 집적회로로 제작된 뉴럴 오실레이터에 대하여 ± 2.5 V 전원 조건하에서 측정된 결과를 분석하고 모의실험 결과와 비교한다.

• 한국지능시스템학회논문지
• /
• 제14권5호
• /
• pp.551-556
• /
• 2004

인간 및 여러 생물들의 DNA 서열이 밝혀짐에 따라 DNA 서열 정보를 이용할 수 있는 계산적 처리방식에 대한 요구가 늘어나고 있다. 본 논문에서는 DNA의 패턴을 분류할 수 있는 면역계 부정 선택에 기반 한 알고리즘을 제안한다. 부정 선택은 면역세포 생성시 자신을 인식하지 않는 항원 인식부를 생성하기 위한 과정이다. 이 항원 인식부를 통해 자기와 비자기를 구별한다. 이것을 n개의 자기 또는 비자기 집단으로 확장하고 n개의 항원 집단을 구성하면 n개의 패턴 분류가 가능하다. 본 논문에서는 부정 선택에 기반 한 DNA 염기 레벨에서의 패턴 분류방법과 아미노산 레벨에서의 패턴분류 방법을 제안한다.

• Journal of Electrical Engineering and Technology
• /
• 제10권3호
• /
• pp.1174-1180
• /
• 2015

We investigate in this paper the radiated electromagnetic waves together with the discharge characteristics of Trichel pulse of negative DC corona discharge in air in pin-to-plate and wire-to-plate configurations. The feature of the current pulse and the frequency spectrum of the electromagnetic radiations were measured under various pressures and gas gaps. The results show that the repetition frequency and the amplitude of Trichel pulse current depend on the discharge conditions, but the rising time of the pulse relates only to the radius of needle or wire and keeps constant even if the other conditions (including the discharge current, the gas gap and the gas pressure) change. There exists the characterized spectrum of electromagnetic waves from negative corona discharge in Trichel pulse regime. These characterized radiations do not change their frequency at a given cathode geometry even if the averaged current, the gas gap or the air pressure changes, but the amplitude of radiations changes accordingly. The characterized electromagnetic radiations from Trichel pulse corona relate to the formation or the rising edge of current pulse. It confirms that the characterized radiations from Trichel pulse supply information of discharge system and provide a potential method for detecting charged targets.

• 한국CDE학회논문집
• /
• 제9권1호
• /
• pp.51-61
• /
• 2004

Mechanical parts are often grouped into part families based on the similarity of their shapes, to support efficient manufacturing process planning and design modification. The 2-part sequence papers present similarity assessment techniques to support part family classification for machined parts. These exploit the multiple feature decompositions obtained by the feature recognition method using convex decomposition. Convex decomposition provides a hierarchical volumetric representation of a part, organized in an outside-in hierarchy. It provides local accessibility directions, which supports abstract and qualitative similarity assessment. It is converted to a Form Feature Decomposition (FFD), which represents a part using form features intrinsic to the shape of the part. This supports abstract and qualitative similarity assessment using positive feature volumes.. FFD is converted to Negative Feature Decomposition (NFD), which represents a part as a base component and negative machining features. This supports a detailed, quantitative similarity assessment technique that measures the similarity between machined parts and associated machining processes implied by two parts' NFDs. Features of the NFD are organized into branch groups to capture the NFD hierarchy and feature interrelations. Branch groups of two parts' NFDs are matched to obtain pairs, and then features within each pair of branch groups are compared, exploiting feature type, size, machining direction, and other information relevant to machining processes. This paper, the second one of the two companion papers, describes the similarity assessment method using NFD.