• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.110-110
• /
• 2017

Biological systems offer unique principles for the design and fabrication of engineering platforms (i.e., popularly known as "Biomimetics") for various applications in many fields. For example, the lotus leaves exhibit unique surfaces consisting of evenly distributed micro and nanostructures. These unique surfaces of lotus leaves have the ability of superhydrophobic property to avoid getting wet by the surrounding water (i.e., Lotus effect). Inspired by the surface topographies of lotus leaves, the artificial superhydrophobic surfaces were developed using various micro- and nanoengineering. Here, we propose new platforms that can control hydrophilic and hydrophobic property of surfaces by mimicking micro- and nanosurfaces of various natural leaves such as common camellia, hosta plantaginea, and lotus. Using capillary force lithography technology and polymers in combination with biomimetic design principle, the unique micro- and nanostructures mimicking natural surfaces of common camellia, hosta plantaginea, and lotus were designed and fabricated. We also demonstrated that the replicated polymeric surfaces had different hydrophilic and hydrophobic properties according to the mimicking the natural leaf surfaces, which could be used as a simple, but powerful methodology for design and fabrication of controlled hydrophilic and hydrophobic platforms for various applications in the field of agriculture and biological engineering.

• Journal of Industrial Technology
• /
• v.16
• /
• pp.123-129
• /
• 1996

A method of calculating the natural frequency corresponding to the first mode of vibration of beams and tower structures with irregular cross-sections and with arbitrary boundary conditions was developed and reported by D. H. Kim in 1974. In order to obtain the natural frequency by the presented method, the first step to take is to obtain the deflection influence surfaces. In design and analysis of any structure, the first step to be taken is to obtain this deflection influence surfaces. Any method can be used for this purpose. Then using this surfaces, deflections, slopes, moments, shears, and natural frequencies can be obtained by differentiating either the continuous function or discrete function defined at certain points. The merit of the presented method is that the natural frequency can be obtained by the deflection influence surfaces obtaining which is the first step in structural analysis.

• Journal of Environmental Science International
• /
• v.24 no.6
• /
• pp.819-826
• /
• 2015

This study measured temperatures and albedos of urban surfaces for different colors and materials during summer, and calculated the energy budget over different urban surfaces to find out the thermal performance affecting the heat built-up. The study selected six surface colors and 13 materials common in urban landscape. Their surface temperatures (Ts) and albedos were measured at a given time interval in the daytime from June to August. Average Ts over summer season for asphalt-colored brick was $4.0^{\circ}C$ higher than that for light red-colored one and $9.7^{\circ}C$ higher than that for white-colored one. The Ts for artificial surface materials of asphalt paving, brown brick wall, and green concrete wall was $6.0^{\circ}C$ higher than that for natural and semi-natural ones of grass, grassy block, and planted concrete wall. There was the greatest difference of $16.3^{\circ}C$ at midafternoon in the Ts between asphalt paving and planted concrete wall. Average albedo over summer season of surface materials ranged from 0.08 for asphalt paving to 0.67 for white concrete wall. This difference in the albedo was associated with a maximum of $15.7^{\circ}C$ difference at midafternoon in the Ts. Increasing the albedo by 0.1 (from 0.22 to 0.32) reduced the Ts by about $1.3^{\circ}C$. Average storage heat at midday by natural and semi-natural surfaces of grass and grassy block was about 10% lower than that by artificial ones of asphalt, light-red brick, and concrete. Reflected radiation, which ultimately contributes to heating the urban atmosphere, was 3.7 times greater for light-red brick and concrete surfaces than for asphalt surface. Thus, surfaces with in-between tone and color are more effective than dark- or white-colored ones, and natural or semi-natural surfaces are much greater than artificial ones in improving the urban thermal environment. This study provides new information on correlation between Ts and air temperature, relationship between albedo and Ts, and the energy budget.

• Tribology and Lubricants
• /
• v.22 no.5
• /
• pp.237-242
• /
• 2006

Surfaces found in nature, including biological surfaces have been providing inspiration to modify/fabricate artificial surfaces as solutions for tribological applications. As an example, the concept of 'lotus-effect' has motivated tribologists world wide to modify/fabricate surfaces for enhanced tribological performance. These was done by creating nano/micro-scale asperities on various surfaces using ion beam milling and ion-beam assisted roughening. In order to understand the attributes of natural surfaces, which are inspirational to tribologists, we characterized the surface of two natural surfaces-Nelumbo nucifera (lotus) and Colocasia esculenta leaves. Further, we evaluated their micro-scale friction property, both in their fresh and dried conditions. The characterization of surfaces was conducted using a confocal microscope and SEM, which involved the evaluation of size and distribution of protuberances. The micro-scale friction property was evaluated using a ball-on-flat type micro-tribo tester, under reciprocating motion. A soda lime glass ball (2 mm diameter) was used in these tests. Tests were conducted at the applied normal load of $3000{\mu}N$, at a sliding speed of 1 mm/sec for a scan length of 3 mm. All experiments were conducted at ambient temperature ($24{\pm}1^{\circ}C}$) and relative humidity ($45{\pm}5%$). It was observed that the friction behaviour of the natural surfaces was influenced by their surface characteristics (morphology and distribution of protuberances) and also by the condition (fresh or dried) in which they were tested.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.642-645
• /
• 2004

This paper focuses on recovering systematic biases during LIDAR calibration, particularly using natural surfaces as control features. Many previous approaches have utilized all the points overlapping with the control features and often experienced with an inaccurate value converged with a poor rate due to wrong correspondence in pairing a point and the corresponding control features. To overcome these shortcomings, we establish a preventive scheme to select the pairs of high confidence, where the confidence value is based on the error budget associated with the point measurement and the linearity and roughness of the control feature. This approach was then applied to calibraring the LIDAR data simulated with the given systematic biases. The parameters were successfully recovered using the proposed approach with the accuracy and convergence rate superior to those using the previous approaches.

• International Journal of CAD/CAM
• /
• v.9 no.1
• /
• pp.71-77
• /
• 2010

Various applications, such as mesh composition and model repair, ask for a natural stitching for polygonal surfaces. Unlike the existing algorithms, we make full use of the information from the two feature lines to be stitched up, and present an accurate stitching method for polygonal surfaces, which minimizes the error between the feature lines. Given two directional polylines as the feature lines on polygonal surfaces, we modify the general placement method for points matching and arrive at a closed-form solution for optimal rotation and translation between the polylines. Following calculating out the stitching line, a local surface optimization method is designed and employed for postprocess in order to gain a natural blending of the stitching region.

• Kyungpook Mathematical Journal
• /
• v.46 no.2
• /
• pp.297-305
• /
• 2006

We classify centroaffine minimal surfaces with constant curvature metric under some natural conditions on the cubic differentials.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.5
• /
• pp.339-340
• /
• 1994

• Journal of the Korean Mathematical Society
• /
• v.33 no.4
• /
• pp.1139-1171
• /
• 1996

The purpose of our research is to understand geometric and topological aspects of real projective structures on surfaces. A real projective surface is a differentiable surface with an atlas of charts to $RP^2$ such that transition functions are restrictions of projective automorphisms of $RP^2$. Since such an atlas lifts projective geometry on $RP^2$ to the surface locally and consistently, one can study the global projective geometry of surfaces.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.3 no.4
• /
• pp.271-275
• /
• 1998

Controversial observations on the effect of pre-attached bacteria on the attachment of diatoms to artificial surfaces immersed in seawater have been made. Furthermore, it is not known whether or not pre-attached bacteria on artificial surfaces influence attachment of diatoms in natural seawater. In this study, we used various surfaces to which marine bacteria were pre-attached for different incubation periods. In the first experiment, glass slides were initially attached by marine natural bacteria with different exposure time (0-133 hr) and then immersed into seawater for a certain time period. The attachment of diatoms was not affected by the abundance of pre-attached bacteria (p > 0.05). The maximum abundance of attached diatoms was found on control surfaces, and the minimum abundance on surfaces where attached bacterial abundance was highest. In the second experiment, glass slides and acryl slides, either attached by marine natural bacteria for 6 days or coated by agar, were immersed in seawater. Untreated slides were also employed. On the surfaces of acryl slides with the most abundant attached bacteria ($5.4{\pm}0.02{\times}10^5\;cells\;cm^{-2}$), abundances of attached diatoms were less than those on untreated slides. On the surfaces of glass slides with bacterial abundance of $2.5{\pm}1.0{\times}10^5\;cells\;cm^{-2}$, however, abundances of attached diatoms were not different from those of untreated slides. On the agar-coated slides, the immigration rate and immigration coefficient were on average > 2 folds compared to other surfaces, indicating high rates of diatom attachment on mucilage simulated surfaces. Therefore, it seems that pre-attachment of bacteria is not prerequisite for the attachment of diatoms on artificial surfaces.