• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2006.05a
• /
• pp.99-100
• /
• 2006

The concept of dental clinic have been changed along the advanced dental science to meet the need of setting up high-technology-digital appliances. As the general idea about the dental clinic has been changed from systematic connection, the expansion of zoning needs to become more accurate and mote detailed. In the spacious waiting room. the interment cafe has been established to supply the information services, and the various multi-imaged channels, which were built in, will relieve the boredom of the waiting time. The formation of water space leads to the effect of humidification and makes parents share visual and auditory sympathy All of the unit-chairs attached cameras in the consultation room enables people to diagnose more quickly and precisely through the computerized system. Partitions have been set of to put it in and to help diagnosis process to be done smoothly in the formational space. The whole atmosphere is intended to be harmony with the natural surroundings in Je-Ju. It will inspire people visiting this clinic to image the deep blue sea in Je-Ju. By using projective non-material a lot, especially material wooden windows and doors, it is believed to create the bright and stable atmosphere. It will lead patients feel comfortable.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.26 no.2
• /
• pp.229-239
• /
• 1998

This study investigated ecological and growth characteristics of Sorbus alnifolia for usage of landscape woody plant. The results are obtained as follows: 1) The results of investigate the native Sorbus alnifolia vegetations in Seoul and Kyonggi-do are as follows. From the investigation of canopy and understory, Pinus densiflora, Pinus rigida, Quercus mongolica Quercus dentata and Quercus aliena grow well in natural habitat of Sorbus alnifolia. While Rhod. mucronulatum, Symplocos chinensis, Corylus hetrophylla and alnifolia. While Rhod. mucronulatum, Symplocos chinensis, Corylus hetrophylla and Lindera obtusiloba are commonly found from shrub structure in the habitat. These structure pattern of natural setting would be applied for ecological planting design. 2) The Mt. Rabong area, which locates near a heavy factory district and is considered as environmental dteriorated area has the lowest soil acidity range among three investigated area. Sorbus alnifolia grows in where contains low soil acidity and inorganic nutrient. It might concluded that Sorbus alnifolia be tolerates to air pollution. 3) From the investigation of good specimen tres, the oldest good specimen trees of Sorbus alnifolia have grown in Seoul and Kyonggi-Do for 130 years with 15m height and 12m width. Most of good specimen trees are over 50 years old with 10~15m height, 4.5-12m width. These growth shape and form could be recommend that Sorbus alnifolia would be used as street tree and landscape woody plant in urban park.

• Bulletin of the Korean Mathematical Society
• /
• v.46 no.2
• /
• pp.331-346
• /
• 2009

Let ${\alpha}$ = (${\alpha}_1,\;{\alpha}_2$,...) and ${\beta}$ = (${\beta}_1,\;{\beta}_2$,...) be two sequences with ${\alpha}_1$ = ${\beta}_1$ and k and n be natural numbers. We denote by $A^{(k,{\pm})}_{{\alpha},{\beta}}(n)$ the matrix of order n with coefficients ${\alpha}_{i,j}$ by setting ${\alpha}_{1,i}$ = ${\alpha}_i,\;{\alpha}_{i,1}$ = ${\beta}_i$ for 1 ${\leq}$ i ${\leq}$ n and $${\alpha}_{i,j}=\{{\alpha}_{i-1,j-1}+{\alpha}_{i-1,j}\;if\;j{\equiv}$$2,3,4,..., k + 1 (mod 2k) $$\{{\alpha}_{i-1,j-1}-{\alpha}_{i-1,j}\;if\;j{\equiv}$$ k + 2,..., 2k + 1 (mod 2k) for 2 ${\leq}$ i, j ${\leq}$ n. The aim of this paper is to study the determinants of such matrices related to certain sequence ${\alpha}$ and ${\beta}$ and some natural numbers k.

• Structural Engineering and Mechanics
• /
• v.65 no.1
• /
• pp.33-41
• /
• 2018

In this paper, using modified couple stress theory in place of classical continuum theory, and using shell model in place of beam model, vibrational behavior of nanotubes is investigated via the finite element method. Accordingly classical continuum theory is unable to correctly compute stiffness and account for size effects in micro/nanostructures, higher order continuum theories such as modified couple stress theory have taken on great appeal. In the present work the mass-stiffness matrix for cylindrical shell element is developed, and by means of size-dependent finite element formulation is extended to more precisely account for nanotube vibration. In addition to modified couple stress cylindrical shell element, the classical cylindrical shell element can also be defined by setting length scale parameter to zero in the equations. The boundary condition were assumed simply supported at both ends and it is shown that the natural frequency of nano-scale shell using the modified coupled stress theory is larger than that using the classical shell theory and the results of Ansys. The results have indicated using the modified couple stress cylindrical shell element, the rigidity of the nano-shell is greater than that in the classical continuum theory, which results in increase in natural frequencies. Besides, in addition to reducing the number of elements required, the use of this type of element also increases convergence speed and accuracy.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.285-287
• /
• 2014

Equations of motion for the vibration analysis of rotating pre-twisted beams with functionally graded material properties are derived in this paper. Based on Timoshenko beam theory, the effects of shear and rotary inertia are considered. The pre-twisted beam has a rectangular cross-section and is mounted on a rotating rigid hub with a setting angle. Functionally graded material (FGM) properties are considered along the height direction of the beam. The equations of stretching and bending motion are derived by Kane's method employing hybrid deformation variables. To validate the derived equations, natural frequencies of a rotating FGM pre-twisted beam are compared to those obtained by a commercial software ANSYS. The effects of the pre-twisted angle, slenderness ratio, hub radius, volume fraction exponent, and angular speed on the modal characteristics of the system are investigated with the proposed model.

• Journal of Power System Engineering
• /
• v.22 no.1
• /
• pp.56-63
• /
• 2018

After the recent fabrication of diesel vehicle exhaust gas by Volkswagen, nitrogen oxides ($NO_x$) and particulate matter (PM) are drawing attention as representative pollutants included in exhaust gas. When gasoline and diesel fuels are combusted through direct injection into a combustion chamber at high pressure, PM emission is actually increased. To find a solution to this problem, a basic study was conducted to derive an optimized variable for combustion of compressed natural gas (CNG) by applying CNG, acknowledged as a clean fuel, to direct injection system. The essence of this study is in the introduction of a radical ignition technology for compressed natural gas (RI-CNG) in a sub-chamber type engine. The direct injection system was applied to a sub-chamber to remove residual gas from previous combustion cycle. In addition, optimal mixer distribution was achieved by precisely setting ignition timing based on fuel injection timing and excess air ratio.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.1
• /
• pp.11-16
• /
• 1996

The purpose of this paper is to present a summary of assignment design values according to domestic softwood structural lumber grading rules. Allowable stresses for visually graded lumber were determined from basic data on small. clear specimens. The data corrected for variability such as natural defects and other factors. The procedure adopted by Japan was used for assigning allowable design values. Strength ratios in relation to each defect were taken from ASTM D 245-81. Korean pine(Pinus koraiensis S. et Z.), Korean red pine(Pinus densiflora S. et Z.), Japanese larch(Larix leptolepis Gordon) and Needle fir(Abies holophylla Max) were applied to this study. The calculated allowable stresses were same in Korean pine and Korean red pine. These values were highest in Japanese larch lowest in Needle fir. So, it is desirable for these species to be classified into different catagories Species Group. However, accurate comparison in design values on lumber grading rules among U.S., Japan and Korea was somewhat difficult. And full scale testing will be necessary for accurate determination of the correction factors to setting up design values.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.05a
• /
• pp.19-22
• /
• 2011

For underground structures that are exposed to environmental conditions, the declination of the durability of concrete occurs easily because of leakages from high hydraulic pressure and the frequent contact of water due to environmental factors. Therefore this study is to confirm that the leakage reduction of natural inorgnic powder compound applying subsurface structural weak part and make the performance improvement of concrete as an objective. The test was done by making the rebar, flat tie, nail and film infiltration and each of its water tank and cylindrical test body then after pouring water to each of the test body, the test observe the change of the water tank surface absorbed condition and leakage of each specimen with respect to time. As a conclusion, the test was observed that this water proofing admixture has better watertightness from the beginning of the setting time(when it hardens), the ettringite and the thaumasite generates a large quantity of hydration products that controls the formation in a large opening and the CSH produced by pozzolan reaction makes a dent at this opening.

• Bulletin of the Korean Mathematical Society
• /
• v.49 no.1
• /
• pp.109-126
• /
• 2012

In 2003, Marques-Smith and Sullivan described the join ${\Omega}$ of the 'natural order' $\leq$ and the 'containment order' $\subseteq$ on P(X), the semigroup under composition of all partial transformations of a set X. And, in 2004, Pinto and Sullivan described all automorphisms of PS(q), the partial Baer-Levi semigroup consisting of all injective ${\alpha}{\in}P(X)$ such that ${\mid}X{\backslash}X{\alpha}\mid=q$, where $N_0{\leq}q{\leq}{\mid}X{\mid}$. In this paper, we describe the group of automorphisms of R(q), the largest regular subsemigroup of PS(q). In 2010, we studied some properties of $\leq$ and $\subseteq$ on PS(q). Here, we characterize the meet and join under those orders for elements of R(q) and PS(q). In addition, since $\leq$ does not equal ${\Omega}$ on I(X), the symmetric inverse semigroup on X, we formulate an algebraic version of ${\Omega}$ on arbitrary inverse semigroups and discuss some of its properties in an algebraic setting.

• Cross-Cultural Studies
• /
• v.22
• /
• pp.329-354
• /
• 2011

This paper aims to probe into the meaning of Ranhou in Mandarin Chinese and to account for discourse functions of it in radio call-in programme. For this purpose, the present study investigates the meaning of Ran and Hou repectively at first and explains the change of meaning of Ranhou, because we assume that Ranhou is compounded by Ran and Hou, and the core meaning is derived from its compounded meaning. Then we examine which time category Ranhou belongs to more based on the concept of time(reference, event, discourse) in Schiffrin(1987), and examine also where it is located within turn. Following this examination, we analysis and explain discourse functions what it is situated. Therethrough, we understand that 1) Ran has 'agreement or confirmation of preceded utterance' therefore has anaphoric meaning, and Hou has 'after' in the meaning cline: back of body-back part-behind-after-retarded(proposed by Heine et al. 1991), so that Ranhou has 'after agreement or confirmation of preceded utterance of mine' and extends to 'on premise preceded utterance or event' furthermore, and therefore can have possibility having various functions; 2) Ranhou has various functions in natural language in spite of the institutional setting. It can indicate (1) temporal relation of events, (2) logic relation of two(or more) events, e.g. causality, elaboration, concession, list, (3) turn maintence, acquisition, management, (4) verbal filler.