• Economic and Environmental Geology
• /
• v.22 no.3
• /
• pp.253-266
• /
• 1989

The Cu-Pb-Zn-Ag hydrothermal vein type deposits which comprise the Dongil and Dong-cheogogsan mines occur within the Cretaceous sedimentary rocks in the Euiseong Basin of the southern Korean peninsula. The ore mineralization is contained within three stage(I,II and III) quartz and calcite veins. Ore minerals occur as dominant chalcopyrite, galena, sphalerite, tetrahedrite and Pb, Ag, Sb and Bi-bearing sulfosalts. Stage I ore minerals were deposited between $400^{\circ}C$ and $200^{\circ}C$ from the fluid with moderate salinities(7.0 to 4.5 eq. wt. % NaCl). Evidence of boiling suggests pressure of less than 150 bars during stage I mineralization. This pressure corresponds to maximum depths of 650 m and 1700 m, respectively, assuming lithostatic and hydrostatic loads. The data on mineralogy, temperature and salinity, together with information on the solubility of Cu complex, suggest that Cu deposition is a result of boiling coupled with declining temperature from $350^{\circ}$ to $250^{\circ}C$ or declining log $a_{o_2}$(from -29.8 to -35.9 atm.)and increasing in pH. Pb, Ag, Sb and Bi-bearing sulfosalts were deposited by cooling and dilution at temperature of less than $250^{\circ}C$ from the ore fluid with less than -35.9 atm. of log $a_{o_2}$.

• Korean Journal of Environmental Agriculture
• /
• v.25 no.4
• /
• pp.323-330
• /
• 2006

This experiment was conducted to investigate heavy metal transition and bioavailability from soil to the edible pare of water dropwort near industrial complex. The soils were collected from the paddies cultivating water dropwort stream sediments, and background soils near industrial complex. The pH values, organic matter, Av. $P_2O_5$, Ex. Ca content of paddy soils were higher than those measured for nor-contaminated paddy fields in 2003. The contents of Cd and Cu was higher than those of standard level for soil contamination by Soil Environmental Conservation Act in Korea. The pollution index in stream sediments were higher than those of paddies cultivating water dropwort. The geoaccumulation index of heavy metals in paddy soils and stream sediment were in the order Cu>Cd>Ni>Zn>Pb. The rates of 0.1N-HCl extractable heavy metals to total contents in soils were in the order Cd>Cu>Zn>Ni>Pb. In case of Cd and Ni in paddy soils near industrial complex, 0.1N-HCl extractable heavy metals and total content were highly correlated with each other. Heavy metal contents in mot parts were higher than those in top pare of water dropwort. The Zn and Cu transfer factor from soil to the top pare of water dropwort were higher than those of other heavy metals. The bioavailability of water dropwort varied considerably between the different parts and heavy metals. Cd, Cu and Ni contents in water dropwort were correlated with each elements in paddy soils.

• Electrical & Electronic Materials
• /
• v.5 no.3
• /
• pp.284-294
• /
• 1992

합성용질확산법으로 GaP단결정을 성장시키고 몇가지 성질을 조사하였다. 정지상태에서 결정의 성장속도는 1.75[mm/day]이었고 결정성장용 석영관을 전기로내에서 하강시키므로써 양질의 GaP 단결정을 성장하였다. 에치피트밀도는 결정의 성장축 방향으로 3.8*$10^{4}$[$cm^{-2}$]부터 2.3*$10^{5}$[$cm^{-2}$] 까지 증가하였다. 성장된 GaP결정의 이동도와 캐리어농도는 실온에서 197.49[$cm^{2}$/V.sec]와 6.75*$10^{15}$[$cm^{-3}$]이었고 77K의 온도에서는 266.91[$cm^{2}$ /V.sec]와 3.13*$10^{14}$[$cm^{-3}$]이었다. 에너지갭의 온도의존성은 실험적으로 $E_{g}$(T)=2.3383-(6.082*$10^{-4}$) $T^{2}$/(373.096+T)[eV]로 구하여졌다. 저온에서 측정된 광루미네센스 스펙트럼은 구속된 여기자의 복사재결합과 재결합 과정에 포논의 참여로 인하여 에너지갭 부근의 복잡한 선 스펙트럼이 나타났고 얕은 준위의 Si도너와 Zn억셉터준위 사이에서의 복사재결합 및 이에 대한 1LO, 2LO의 포논복제가 나타났으며 S $i_{Ga}$ -S $i_{p}$의 쌍방출에 의하여 1.8932[eV]에서 넓은 반치전폭의 피크가 나타났다. GaP의 적외선 흡수는 TO, LO, LA, T $A_{1}$, T $A_{2}$ 포논들의 이중결합모드와 G $a_{2}$O의 진동모드 및 Si도너와 Zn억셉터들에 의하여 일어났다. Zn를 확산시키어 제작한 p-n GaP발광다이오드는 실온에서의 발광중심피크가 6250[.angs.]이었고 최대광출력은 0.0916[mW], 양자효율은 0.51%이었다.이었다.

• The Korean Journal of Mycology
• /
• v.24 no.3 s.78
• /
• pp.214-222
• /
• 1996

This study was carried out to obtain the basic data on artificial culture of Phellinus linteus. The optimum condition for the mycelial growth was $25{\sim}30^{\circ}C$ and pH $6.0{\sim}7.0$. The carbon sources such as D-glucose, D-mannose and Dextrose were favorable to mycelial growth. As nitrogen sources, peptone, cassamino acid and glutamic acid appeared to be favorable. The optimum C/N ratio was about 20:1, when 2% of glucose was provided as a carbon source. The better organic acids and vitamin among tested ones were gallic, silicic acids and biotin. The mineral nutrients of $KH_2PO_4,\;FeSO_4{\cdot}7H_2O,\; MgSO_4{\cdot}7H_2O,\;ZnSO_4{\cdot}7H_2O$ were effective and the optimum concentrations were 0.05, 0.001, 0.02 and 0.003%, respectively.

• Journal of Radiation Protection and Research
• /
• v.12 no.1
• /
• pp.48-53
• /
• 1987

The manganous sulphate bath method is widely used for measurements of neutron source strength. In this study, the analytical chemistry method based on the argon supported inductively coupled plasmas emission spectrometry was used for examining the impurity contents of domestic $MnSO_4{\cdot}H_2O$ the product of Chemical Industry, to induce $^{55}Mn(n,{\gamma})^{56}$ Mn reactions. From the analytical results, mainly potassium, cobalt, and zinc as well as trace amounts of cadmium, lithium, etc. have turned out to be the relevant impurities absorbing the neutrons, and the fraction of neutrons absorbed by the total impurities was calculated. The value obtained was about 1.37% of the neutrons captured by manganese.

• Journal of Korean Society for Atmospheric Environment
• /
• v.19 no.6
• /
• pp.701-717
• /
• 2003

The objective of this study was to extensively estimate the air quality trends of the study area by surveying con-centration trends in months or seasons, after analyzing the mass concentration of PM-10 samples and the inorganic lements, ion, and total carbon in PM-10. Also, the study introduced to apply the PMF (Positive Matrix Factoriza-tion) model that is useful when absence of the source profile. Thus the model was thought to be suitable in Korea that often has few information about pollution sources. After obtaining results from the PMF modeling, the existing sources at the study area were qualitatively identified The PM-10 particles collected on quartz fiber filters by a PM-10 high-vol air sampler for 3 years (Mar. 1999∼Dec.2001) in Kyung Hee University. The 25 chemical species (Al, Mn, Ti, V, Cr, Fe, Ni, Cu, Zn, As, Se, Cd, Ba, Ce, Pb, Si, N $a^{#}$, N $H_4$$^{+}$, $K^{+}$, $Mg^{2+}$, $Ca^{2+}$, C $l^{[-10]}$ , N $O_3$$^{[-10]}$ , S $O_4$$^{2-}$, TC) were analyzed by ICP-AES, IC, and EA after executing proper pre - treatments of each sample filter. The PMF model was intensively applied to estimate the quantitative contribution of air pollution sources based on the chemical information (128 samples and 25 chemical species). Through a case study of the PMF modeling for the PM-10 aerosols. the total of 11 factors were determined. The multiple linear regression analysis between the observed PM-10 mass concentration and the estimated G matrix had been performed following the FPEAK test. Finally the regression analysis provided source profiles (scaled F matrix). So, 11 sources were qualitatively identified, such as secondary aerosol related source, soil related source, waste incineration source, field burning source, fossil fuel combustion source, industry related source, motor vehicle source, oil/coal combustion source, non-ferrous metal source, and aged sea- salt source, respectively.ively.y.

• Journal of Powder Materials
• /
• v.25 no.6
• /
• pp.487-493
• /
• 2018

The impact of different mixing methods and sintering temperatures on the microstructure and piezoelectric properties of PZNN-PZT ceramics is investigated. To improve the sinterability and piezoelectric properties of these ceramics, the composition of $0.13Pb((Zn_{0.8}Ni_{0.2})_{1/3}Nb_{2/3})O_3-0.87Pb(Zr_{0.5}Ti_{0.5})O_3$ (PZNN-PZT) containing a Pb-based relaxor component is selected. Two methods are used to create the powder for the PZNN-PZT ceramics. The first involves blending all source powders at once, followed by calcination. The second involves the preferential creation of columbite as a precursor, by reacting NiO with $Nb_2O_5$ powder. Subsequently, PZNN-PZT powder can be prepared by mixing the columbite powder, PbO, and other components, followed by an additional calcination step. All the PZNN-PZT powder samples in this study show a nearly-pure perovskite phase. High-density PZNN-PZT ceramics can be fabricated using powders prepared by a two-step calcination process, with the addition of 0.3 wt% MnO2 at even relatively low sintering temperatures from $800^{\circ}C$ to $1000^{\circ}C$. The grain size of the ceramics at sintering temperatures above $900^{\circ}C$ is increased to approximately $3{\mu}m$. The optimized PZNN-PZT piezoelectric ceramics show a piezoelectric constant ($d_{33}$) of 360 pC/N, an electromechanical coupling factor ($k_p$) of 0.61, and a quality factor ($Q_m$) of 275.

• Korean Journal of Metals and Materials
• /
• v.49 no.4
• /
• pp.281-290
• /
• 2011

In order to gain better understanding of the selective surface oxidation and its influence on the galvanizability of a transformation-induced plasticity (TRIP) assisted steel containing 1.5 wt.% Si and 1.6 wt.% Mn, a model experiment has been carried out by depositing Si and Mn (each with a nominal thickness of 10 nm) in either monolayers or bilayers on a low-alloy interstitial-free (IF) steel sheet. After intercritical annealing at $800^{\circ}C$ in a $N_2$ ambient with a dew point of $-40^{\circ}C$, the surface scale formed on 590 MPa TRIP steel exhibited a microstructure similar to that of the scale formed on the Mn/Si bilayer-coated IF steel, consisting of $Mn_{2}SiO_{4}$ particles embedded in an amorphous $SiO_{2}$ film. The present study results indicated that, during the intercritical annealing process of 590 MPa TRIP steel, surface segregation of Si occurs first to form an amorphous $SiO_{2}$ film, which in turn accelerates the out-diffusion of Mn to form more stable Mn-Si oxide particles on the steel surface. During hot-dip galvanizing, particulate $Fe_{3}O_{4}$, MnO, and Si-Mn oxides were reduced more readily by Al in a Zn bath than the amorphous $SiO_{2}$ film. Therefore, in order to improve the galvanizability of 590 TRIP steel, it is most desirable to minimize the surface segregation of Si during the intercritical annealing process.

• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.858-863
• /
• 1995

The nitrogenation process and magnetic properties of $Sm_{2}Fe_{17}N_{x}\;(0{\leq}x{\leq}3)$ were investigated. During the initial nitrogenation process, the nitrogen content had linear relation with the square root of nitrogenation time, and the activation energy for the process was calculated to be 102.4 kJ/mol. The magnetic properties of $Sm_{2}Fe_{17}N_{x}$ were strongly dependent on the nitrogen content and the composition having $Sm_{2}Fe_{17}N_{2.8}$ showed optimum magnetic properties with a Curie temperature of 450 oC. The intrinsic magnetic properties of the nitride at room temperature were $M_{s}=1147\;emu/cm^{3},\;K_{1}=4.6{\times}10^{7}erg/cm^{3},\;K_{2}=6.0{\times}10^{7}erg/cm^{3}\;and\;H_{A}=290\;kOe$, respectively.

• Transactions on Electrical and Electronic Materials
• /
• v.16 no.2
• /
• pp.62-64
• /
• 2015

We have investigated zinc tin oxide (ZTO) thin films under various silicon ratios. ZTO TFTs were fabricated by solution processing with the bottom gate structure. Furthermore, annealing process was performed at different temperatures in various annealing conditions, such as air, vacuum and wet ambient. Completed fabrication of ZTO TFT, and the performance of TFT has been compared depending on the annealing conditions by measuring the transfer curve. In addition, structure in ZTO thin films has been investigated by X-ray diffraction spectroscopy (XRD) and Scanning electron microscope (SEM). It is confirmed that the electrical performance of ZTO TFTs are improved by adopting optimized annealing conditions. Optimized annealing condition has been found for obtaining high mobility.