• Journal of Internet Computing and Services
• /
• v.5 no.4
• /
• pp.35-42
• /
• 2004

In this paper the more accurate models than any other ones so far have been proposed for the performance evaluation of single-buffered banyan-type Multistage Interconnection Networks(MINs)'s under nonuniform traffic condition is obtained. Small clock cycle instead of big clock cycle is used. The accuracy of proposed models are conformed by comparing with the results from simulation.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.428-431
• /
• 2004

A multi-stage hierarchical clustering technique, which is an unsupervised technique, has been proposed in this paper for classifying the hyperspectral data .. The multistage algorithm consists of two stages. The 'local' segmentor of the first stage performs region-growing segmentation by employing the hierarchical clustering procedure with the restriction that pixels in a cluster must be spatially contiguous. The 'global' segmentor of the second stage, which has not spatial constraints for merging, clusters the segments resulting from the previous stage, using a context-free similarity measure. This study applied the multistage hierarchical clustering method to the data generated by band reduction, band selection and data compression. The classification results were compared with them using full bands.

• International Journal of Fluid Machinery and Systems
• /
• v.1 no.1
• /
• pp.86-91
• /
• 2008

The effects of the diffuser vane on the performances of the multistage centrifugal pump were investigated experimentally, taking account of the interactions among the diffuser vane, the return vane, and the next stage impeller. It is very important to match well the diffuser vane with the return vane, for improving the hydraulic efficiency of the pump. The efficiency may be more improved by making the cross-sectional area of the channel from the diffuser vane outlet to the return vane inlet larger, as much as possible.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.7-11
• /
• 2000

본 논문에서는 불완전 동기(Imperfect Synchronization)로 인한 칩 동기 에러(timing errors)와 위상 에러(phase errors)를 고려 하여 비동기(Asynchronous) DS-CDMA 시스템의 성능을 이론적으로 분석하였다. 성능 개선 기법으로는 다단 간섭제거기 (Multistage PIC)와 부분 다단 간섭제거기(Partial Multistage PIC)를 채용하였고 칩 동기 에러와 위상 에러가 두 간섭제거기의 간섭제거능력에 미치는 영향의 정도를 정량적으로 분석하였다. 성능분석 결과로부터 칩 동기 에러와 위상 에러로 인한 1단(no cancellation)에서의 성능 열화가 각 단의 상관기 출력(decision statistic)에 영향을 줌으로써 다단 간섭제거기와 부분 다단 간섭제거기의 성능 개선폭을 감소시켰다. 그렇지만, 불완전 동기에도 불구하고 단(stage) 수가 증가할수록 두 간섭제거기 모두 강한 간섭제거능력을 보였다. 실제 시스템에서는 성능 개선과 구현상의 복잡도를 동시에 고려해야하므로 다단 간섭제거기 보다 구조가 간단하고 계산량이 적은 부분 다단 간섭제거기의 활용도가 높아질 것이 예상된다.

• 제어로봇시스템학회:학술대회논문집
• /
• 1995.10a
• /
• pp.392-395
• /
• 1995

This paper presents a time efficient method for determining a sequence of locations of a mobile manipulator that facilitates tracking of continuous path in cluttered environment. Given the task trajectory in the form of octree data structure, the algorithm performs characterization of task space and subsequent multistage optimization process to determine task feasible locations of the robot. Firstly, the collision free portion of the trajectory is determined and classified according to uniqueness domains of the inverse kinematics solutions. Then by implementing the extent of task feasible subspace into an optimization criteria, a multistage optimization problem is formulated to determines the task feasible locations of the mobile manipulator. The effectiveness of the proposed method is shown through a simulation study performed for a 3-d.o.f. manipulator with generic kinematic structure.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.23 no.6
• /
• pp.860-867
• /
• 1986

It was shown previously that four tests are required in order to detect single fault and to locate single link stuck fault for a class of multistage interconnection networks. In this paper, we show that only three tests are necessary and sufficient both to detect single fault and to locate single link stuck fault. A fault diagnosis method with four valid state for a class of multistage kinterconnection networks is presented. Using this method, all single link stuck fault or all single switching element faults, can be detected by at most 4 log2N+e tests. In the example, the location and type of single fault are pinpointed, and unlocatable probabilities of questionable of questionable regions are given.

• The KSFM Journal of Fluid Machinery
• /
• v.15 no.1
• /
• pp.13-20
• /
• 2012

A vertical-axis multistage pump with low specific speed was developed, satisfying performance requirements such as flow rate, total head, and NPSH. The developed pump was designed through conceptual design, configuration design, and performance analysis by CFD which were established in KIMM. The prototype pump's mechanical wholesomeness besides hydraulic performances were verified by running test, performance test, and reliability test.

• Journal of Power System Engineering
• /
• v.3 no.3
• /
• pp.54-59
• /
• 1999

The purpose of the present study was to develop the numerical method for predicting the on-design and off-design performance of multistage axial-flow compressors. The aerodynamic properties in blade rows were analyzed by incorporating the streamline curvature method as a quasi 3D analysis with the imperical modeling of exit flow angle and loss coefficients. The present calculation procedure has been tested by applying to 5-stage compressors and good agreement with experiments has been found. The detail analysis of aerodynamic performances has been done on the compression part of the bench-scaled gas turbine engines. The predicted performance map at the variable speedline and flow rates could be used as a guide of the engine operation.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.4
• /
• pp.49-54
• /
• 2001

This study was carried out to acquire basic data for the bleaching of bamboo chemical pulp. Bamboo chemical pulps (alkaline sulfite (AS)-anthraquinone (AQ) pulp, Kraft pulp) were bleached with two kinds of multistage bleaching methods (CEDED, PDED) using the various kinds of bleaching agents. And, physical properties of bleached pulps were investigated. The conclusions obtained from the results were as follows; The yield of AS-AQ pulp bleached with four-stages bleaching method using the hydrogen peroxide and chlorine dioxide as a bleaching agents was higher than the other bleached pulps. The brightness of kraft pulp bleached with five-stages bleaching method using the chlorine and chlorine dioxide as a bleaching agents was higher than the other bleached pulps. The physical properties of kraft pulp bleached with four-stages bleaching method using the hydrogen peroxide and chlorine dioxide as a bleaching agents was higher than the other bleached pulps.

• Nuclear Engineering and Technology
• /
• v.39 no.5
• /
• pp.663-672
• /
• 2007

The mutual separation behavior of actinides and rare earths in a countercurrent multistage reductive extraction system was predicted by computer calculation. The distribution information for actinides and rare earths in the reductive extraction systems of LiCl-KCl/Cd and LiCl-KCl/Bi was collected from literature and then it was used for the calculation of a multistage extraction. The results of the concentration profiles throughout the extraction cascade, recovery yields of various metal solutes, and separation factors between the actinides and rare earths were calculated. The effects of the major process parameters, such as reducing agent content in the metal phase, number of stages, and salt/metal flow ratio, etc., on the extraction behavior were also examined.