• 전기학회논문지
• /
• 제63권4호
• /
• pp.551-558
• /
• 2014

Baseline drift reduction and removal of power line noises in electrocardiogram are often necessary to avoid the distortions in extracting the fiducial features. With this aim, the multirate digital filtering algorithm is suggested to design and implement Finite Impulse Response or Infinite Impulse Response Filter by changing the sampling rate with omitting or interpolating intermediate ECG data. After the experimental simulations performed, we can conclude the fact that we can suppress the baseline wander and power line disturbances in ECG signal with reducing the computational complexities in which we do not keep the original and high sampling frequency.

• ETRI Journal
• /
• 제29권2호
• /
• pp.143-152
• /
• 2007

In this paper, we propose a time-varying modified minimum mean-squared error (MMSE) detector for the detection of higher data rate signals in a multirate asynchronous code-division multiple-access (CDMA) system which is signaled in a fast Rayleigh fading channel. The interference viewed by a higher data rate symbol will be periodic due to the presence of a lower data rate symbol which spans multiple higher data rate symbols. The detection is carried out on the basis of a modified MMSE criterion which incorporates differential detection and the ratio of channel coefficients in two consecutive observation intervals inherently compensating the fast variation of the channel due to fading. The numerical results obtained by the MMSE detector with time-varying detection show around 3 dB (M=2) and 6 dB (M=4) performance improvement at a BER of $10^{-3}$ in the AWGN channel, while introducing more computational complexity than the MMSE detector without time-varying detection. At a higher $E_b/N_0$, the proposed scheme can achieve a BER of approximately $10^{-3}$ in the presence of fast channel variation which is an improvement over other schemes.

• Journal of Communications and Networks
• /
• 제5권2호
• /
• pp.116-123
• /
• 2003

In this paper, we address the problem of designing multirate codes for a multiple-input and multiple-output (MIMO) system by restricting the receiver to be a successive decoding and interference cancellation type, when each of the antennas is encoded independently. Furthermore, it is assumed that the receiver knows the instantaneous fading channel states but the transmitter does not have access to them. It is well known that, in theory, minimummean- square error (MMSE) based successive decoding of multiple access (in multi-user communications) and MIMO channels achieves the total channel capacity. However, for this scheme to perform optimally, the optimal rates of each antenna (per-antenna rates) must be known at the transmitter. We show that the optimal per-antenna rates at the transmitter can be estimated using only the statistical characteristics of the MIMO channel in time-varying Rayleigh MIMO channel environments. Based on the results, multirate codes are designed using punctured turbo codes for a horizontal codedMIMOsystem. Simulation results show performances within about one to two dBs of MIMO channel capacity.

• 한국통신학회논문지
• /
• 제29권9C호
• /
• pp.1219-1226
• /
• 2004

본 논문에서는 다중처리이득 기법을 사용한 비동기 다중 전송률 DS-CDMA 시스템에서 발생하는 다중접속 간성을 제거하기 위한 새로운 하이프리도 수신기를 제안한다. 효과적인 간섭제거를 위해, 서로 다른 전송률을 갖는 사용자들을 그룹화 하여 간섭을 제거할 수 있는 새로운 하이브리드 간섭제거 방식을 제시하였다. 즉, 그룹화를 통해 그룹 간에는 병렬 간섭제거방식을 사용하여 그룹간의 간섭을 일차적으로 제거하며 그룹 내에는 직렬 간섭제거방식을 적용하여 그룹 내 사용자간의 간성을 제거하였다. 제안된 시스템을 가우시안 잡음환경 하에서 오류확률을 구했으며, 기존 직렬 간섭제거 방식이나 적응 다단 병렬 간섭제거방식과의 성능비교를 통해 제안된 시스템의 성능이 우수한 것을 알 수 있었다.

• 전기학회논문지
• /
• 제59권11호
• /
• pp.2108-2113
• /
• 2010

The Long Term Evolution (LTE) system is based on the Orthogonal Frequency Division Multiplexing (OFDM) and relies its channel estimation on the lattice-type pilot samples in the multipath fading channel environment. The estimation of the channel frequency response (CFR) makes use of the least squares estimate (LSE) for each pilot samples, followed by an interpolation both in time- and in frequency-domain to fill up the channel estimates for subcarriers corresponding to data samples. Any interpolation scheme could be adopted for this purpose. Depending on the requirements of the target system, we may choose a simple linear interpolation or a sophisticated one. For any choice of an interpolation scheme, these is a trade-off between estimation accuracy and numerical cost. For those wireless communication systems based on the OFDM and the preamble-type pilot structure, the DFT-based channel estimation and its variants have been successfully. Yet, it may not be suitable for the lattice-type pilot structure, since the pilot samples are not sufficient to provide an accurate estimate and it is known to be sensitive to the location as well as the length of the time-domain window. In this paper, we propose a simple interpolated based on the upsampling mechanism in the multirate signal processing. The proposed method provides an excellent alternative to the DFT-based methods in terms of numerical cost and accuracy. The performance of the proposed technique is verified on a multipath environment suggested on a 3GPP LTE specification.

• 융합신호처리학회논문지
• /
• 제7권2호
• /
• pp.65-72
• /
• 2006

디지털신호처리에 있어서 신호의 다상분해(polyphase decomposition)는 멀티레이트(multirate) 시스템 구현에 있어서 다양한 용도로 사용된다. 특히 디지털 필터설계 등에 있어서 다채널 신호를 제공함으로써 병열연산을 가능하게 하여 알고리즘의 성능을 개선하는데 특히 유용하다. 일반적으로 다상분해신호는 원신호를 다운샘플링을 위해 데시메이션(decimation)하기 때문에 원신호에 비해 많은 고주파 성분을 포함하여 주파수 대역이 확장되는 경향이 있다. 이러한 성질은 다상분해신호의 활용, 즉 디지털 신호처리 시스템의 구조나 성능에 상당한 제약을 초래한다. 따라서 본 연구에서는 다상분해신호에 대한 완전 대역압축 및 복원 방법을 이론적으로 제시하고 Matlab 시뮬레이션을 통하여 그 유효성을 확인한다.

• 한국통신학회논문지
• /
• 제18권6호
• /
• pp.895-906
• /
• 1993

본 논문에서는 영상의 대역분할 부호화를 위한 다중비트율 트리구조 벡터양자화를 제안하였다. 영상의 대역분할은 원영상을 특정 대역과 방향성을 갖는 대역성분들로 분리하므로, 대역분할을 거친 각 대역성분을 학습영상으로 사용하여 다중비트율 트리구조 벡터양자화기를 설계하였다. 대역분할을 거친 각 대역성분에 대한 최적비트할당은 원하는 비트율과 왜곡을 갖는 다중 비트율 트리구조 벡터양자화기의 전정서브트리를 선택하는 문제로 귀착된다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(1)
• /
• pp.49-52
• /
• 2000

The Multi-Code CDMA systems that are proposed as an effective transmission methodology in the IMT-2000 systems allow higher rate services under the IS-95 CDMA infrastructure. The Multi-Code CDMA systems convert the higher rate data into the lower rate by serial to parallel operation and spread the converted data streams by the multiple walsh codes, and its mobile receiver needs multiple walsh generators and data correlators to demodulate simultaneously multiple walsh code channels. Therefore, the number of data correlators is increased as the number of traffic channels increases. In this paper, we proposed the new structure of the data correlators using walsh overlay coding, the shared accumulator, and FWHT(Fast Walsh Hadamard Transform) algorithm for reducing the bottle-neck effect resulting the increase of the number of data correlators.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 V
• /
• pp.2593-2596
• /
• 2003

The deadbeat properties have been well known in designing digital control systems. But recently several researchers proposed a CDBC(Continuout-time DeadBeat Controller) in continuous time. They used delay or smoothing elements from the finite Laplace Transform. A delay element is made by the exponential terms. A smoothing element is used to smooth the digital control input. And eventually the process is argumentd with smoothing elements and then well-known digital deadbeat controller is designed Sometimes samplings are done in continuous time systems and some hold devices are used to relate to digital systems. So multirate sampling may enhance the efficiency of the CDBC. A DC servo motor is chosen for implementing CDBC algorithm. Especially Outputs according to the variable input and disturbance are simulated. by use of Matlab Simulink.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2005년도 추계학술대회 학술발표 논문집 제15권 제2호
• /
• pp.91-94
• /
• 2005

This paper presents a new linear- matrix- inequality- basedintelligent digital redesign (LMI-based IDR) technique to match he states of the analog and the digital control systems at the intersampling instants as well as the sampling ones. The main features of the proposed technique are: 1) the multirate control is employed, and the control input is changed N times during one sampling period; 2) The proposed IDR technique is based on the compensated bilinear transformation.