• 전산구조공학
• /
• 제9권3호
• /
• pp.179-186
• /
• 1996

본 연구에서는 구조체의 위상학적 최적화를 위한 비선형 formulation(NLP)가 개발, 검토되었다. 이 NLP는 multiple-loading하에서 임의의 오브젝티브 함수, 응력, 변위 제약조건들을 쉽게 다룰 수가 있다. 또한 이 NLP는 해석과 최적화 디자인을 동시에 실시함으로써 요소 사이즈가 영으로 접근함에 따른 강성 매트릭스의 singularity를 피할 수 있다. 즉, 평형 방정식을 등제약조건으로 치환함으로써 강성 매트릭스 그 자체나 그의 역매트릭스를 구할 필요도 없어진다. 이 NLP는 multiple-loading conditon하에서 테스트되었으며, 이를 통해 이 NLP가 다양한 제약조건하에서 강력하게 작용함이 입증되었다.

• 대한기계학회논문집A
• /
• 제20권9호
• /
• pp.2800-2811
• /
• 1996

The deformation of a structure shall be called homologous, if a given geometrical relation holds, for a given number of structural points, before, during, and after the deformation. Some researchers have utilized the idea on structural design with finite element method. The approaches use the decomposition of the FEM equation or equality of eqality equations to obtain homologous deformation. However, weight reduction and response constraints such as stress, displacement or natural frequency cannot be considered by those theories. An optimization method solving the above problems is suggested to gain homologous deformation. Homology constraints can be considered under multiple loadindg conditions as well as a single loading condition. Homology index is defined for the multiple loading conditions Examples are solved to present the performances of the method.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제2권6호
• /
• pp.403-412
• /
• 2013

본 연구는 기업물류와 물류비 및 컨테이너 운송의 개념을 정리하고, 한국 기업의 물류 중 비중이 큰 수송의 효율성 제고를 중심으로 물류비 절감방안을 제안하고 있다. 한국 S사의 사례연구를 통해 다수 출발지와 다수의 도착지를 고려한 컨테이너 화물적재에 대한 문제점을 분석과 토론을 하고자 한다. 혼합적재를 위한 조건들과 컨테이너 적재결정을 위한 규칙기반 시스템을 제안하고자 한다. 또한 화물운송 비용 최소화를 위해 적절한 규칙을 선택하여 적재를 결정 하는 알고리즘을 제시하고 있다. 데이터마이닝 및 OLAP 도구인 MS 분석 서비스를 이용하여 혼합적재를 위한 규칙들을 생성하고 OLAP 큐브 및 의사결정트리를 생성하여 규칙을 검증한다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(II)
• /
• pp.857-862
• /
• 2002

철도차량의 주행장치는 비틀림 선로를 주행할 경우 윤중감소가 발생하게 되며 이 값은 모든 하중 조건 및 공기스프링의 충기/배기 상태에서 UIC/ORE 보고서에서 규정한 기준치 60% 이내를 준수하여야만 한다. 이 논문은 인도 DMRC 전동차를 대상으로 시험을 실시하여 DMRC 선로 중 최악의 조건에서 UIC / ORE 에서 규정하고 있는 차량의 윤중감소율( Wheel Off-loading)의 기준을 만족하는 지에 대한 평가한 것을 기술하였다.

• 국제강구조저널
• /
• 제18권5호
• /
• pp.1784-1800
• /
• 2018

Tension-shear loading is a common loading condition in steel structures during the earthquake shaking. To study ductile fracture in structural steel under multiple stress states, experimental investigations on the different fracture mechanisms in Chinese Q235 steel were conducted. Different tension-shear loading conditions achieved by using six groups of inclined notch butterfly configurations covering pure shear, tension-shear and pure tension cases. Numerical simulations were carried out for all the specimens to determine the stress and strain fields within the critical sections. Two tension-shear fracture models were calibrated based on the hybrid experimental-numerical procedure. The equivalent fracture strain obtained from the round bar under tensile loading was used for evaluating these two models. The results indicated that the tension-shear criterion as a function of the shear fracture parameter had better performance in predicting the fracture initiation of structural steel under different loading conditions.

• Journal of Biosystems Engineering
• /
• 제30권2호
• /
• pp.89-94
• /
• 2005

The compression strength of corrugated fiberboard container for packaging the agricultural products rapidly decreases because of various environmental conditions during distribution of unitized products. Among various environmental conditions, the main factors affecting the compression strength of corrugated fiberboard are absorption of moisture, long-term accumulative load, and fatigue caused by shock and vibration. An estimated rate of damage for fruit during distribution is about from 30 to 40 percent owing to the shock and vibration. This study was carried out to characterize the durability of corrugated fiberboard container for packaging the fruit and vegetables under simulated transportation environment. The vibration test system was constructed to simulate the land transportation using truck. After the package with corrugated fiberboard container was vibrated by vibration test system at various experimental conditions, the compression test for the package was performed. The compression strength of corrugated fiberboard container decreased with loading weight and vibrating time. The multiple nonlinear regression equation for predicting the decreasing rate of compression strength of corrugated fiberboard containers were developed using four independent variables such as input acceleration level, input frequency, loading weight and vibrating time. The influence of loading weight on the decreasing rate of corrugated fiberboard container was larger than other variables.

• 약학회지
• /
• 제44권6호
• /
• pp.511-520
• /
• 2000

Various bupivacaine-loaded microspheres were prepared from poly (d,l-lactide) (PLA) or poly (d,l-lactic-co-glycolide) (PLGA) by a solvent evaporation method for the sustained release of drug. PLA and PLGA microspheres were prepared by w/o/w and w/o/o multiple emulsion solvent evaporation, respectively. The effects of process conditions such as emulsification speed, emulsifier type, emulsifier concentration and internal/external phase ratio on the characteristics of microspheres were investigated. The prepared microspheres were characterized for their drug loading, size distribution, surface morphology and release kinetics. Drug loading efficiency was higher in the microspheres prepared by w/o/o multiple emulsion than that by w/o/w multiple emulsion method, because the solubility of bupivacaine HCI was decreased in oil phase compared with water phase. The prepared microspheres had an average diameter between 1 and $2\;{\mu}M$ in all conditions of two methods. In morphology studies the PLA microspheres showed an irregular shape and smooth surface, but PLGA microspheres had a spherical shape and smooth surface. The release pattern of the drug from microspheres was evaluated on the basis of the burst effect and the extent of the release after 24h. The in vitro release of bupivacaine HCl from microspheres showed a large initial burst release and $60{\sim}80%$ release within one day in all conditions of two methods. The extents of the burst release against PLA and PLGA microspheres were $30{\sim}50%$ and $50{\sim}80%$ within 20min, respectively. This burst release seems to be due to the smaller size of microspheres and the solubility of drug in water.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 추계학술대회 논문집
• /
• pp.415-422
• /
• 1999

The general concept of reinforced roadbed in the high-speed railway is to cope with the soft ground for the bearing capacity and settlement of foundation soil. The cyclic plate load tests were performed to determine the behavior of reinforced ground with multiple layers of geogrid underlying by soft soil. Five series of test were conducted with varying the soil profile conditions including the ground level, type of soil, and the thickness of each soil layer. Based on these plate load tests, laboratory model tests under cyclic loading were conducted to know the effect of geogrid reinforcement in particular for the high-speed rail roadbed. The permanent settlement and the behavior of earth pressure in reinforced roadbed subjected to a combination of static and dynamic loading are presented.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 A
• /
• pp.134-136
• /
• 1993

This paper presents a novel and efficient method to calculate the critical point of voltage collapse. Conjugate gradient and modified Newton-Raphson methods are employed to calculate two pairs of multiple load flow solutions for two operating conditions, i.e., both +mode and -mode voltages for two loading conditions respectively. Then these four voltage magnitude-load data sets of the bus which is most susceptible to voltage collapse, are fitted to third order polynomial using Lagrangian interpolation in order to represent approximate nose curve (P-V curve). This nose curve locates first estimate of the critical point of voltage collapse. The procedure described above is repeated near the critical point and the new estimate will be very close to the critical point. The proposed method is tested for the eleven bus Klos-Kerner system, with good accuracy and fast computation time.

• 소성∙가공
• /
• 제21권5호
• /
• pp.319-323
• /
• 2012

In order to predict the internal void closing behavior in open die forging process, multiple scale modeling has been developed and applied. The huge size difference between ingot and inner void makes it almost impossible to simultaneously model the actual loading conditions and the void shape. Multiple scale modeling is designed to integrate macro- and micro- models effectively and efficiently. The void closing behavior was simulated at 39 different locations in a large ingot during upsetting and cogging. The correlation between the closing behavior and variables such as effective plastic strain and maximum compressive strain was studied in order to find an efficient measure for predicting the soundness of the forging.